Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Coral Gables, FL
Gate installation in Coral Gables usually involves matching a new system to one of the city’s 1920s Mediterranean Revival estates or a modern Gables Estates driveway, then engineering it for salt air and hurricane season. We quote the full job before any work starts, and we work on the brand already on your property when a repair makes more sense than a replacement. Call (855) 360-5306 for a free estimate.
Why Coral Gables Homes Are Different
Coral Gables is not a typical South Florida suburb. The housing stock leans heavily toward 1920s Mediterranean Revival and Spanish Colonial estates, many with original wrought-iron gates that have outlived three or four opener systems. In newer sections like Gables Estates, you’ll find large automated driveway gates on wide lots, often tied into full access-control setups. In older pockets like Dutch South African and French City Village, gate posts are frequently set into coral rock walls. That soft, porous limestone shifts with seasonal rain, which means a gate that sagged in May may bind completely by September.
Then there’s the Board of Architects. Coral Gables enforces design review that most cities don’t, so a gate replacement often needs to match the property’s original character. We’ve sourced custom wrought-iron and cypress replacements for homes where an off-the-shelf aluminum gate would never pass review. Add salt-laden ocean air accelerating rust and hurricane wind loads straining motors, and you get a repair environment where generic fixes fail fast. Diagnosed, not guessed, is the only approach that works here.
Styles & brands we work with
Our Main Coral Gables Services
Most Coral Gables callers reach us about one of two things: a gate that stopped working, or an electric opener that’s behaving erratically. Both are covered below.
Gate Repair in Coral Gables
Mechanical gate repair in Coral Gables often means salvaging antique ironwork rather than swapping in new hardware. Hinges seize from salt corrosion, posts shift in coral rock, and latch alignment drifts as limestone settles. We repair hinges, weld cracks, realign sagging leaves, and rebuild latch mechanisms, always matching the existing metal finish. Repair first, replace only when necessary, because a 1920s gate is usually worth saving. For a full breakdown of what we fix, see Gate Repair in Coral Gables.
Electric Gate Repair in Coral Gables
Electric gate failures here tend to follow a pattern: a motor that labors against wind load, a control board corroded by humid salt air, or safety sensors knocked out of alignment by shifting posts. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we recognize the failure point before we open the panel. Wiring, control boards, safety loops, and motors are all in scope. For the full scope, see Electric Gate Repair in Coral Gables.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Coral Gables
Gate installation in Coral Gables means engineering a system that survives hurricane wind loads, resists salt corrosion, and satisfies the Board of Architects. We handle the full Gate Installation process, from measuring the opening and assessing the existing posts to installing the gate, opener, and safety sensors. In older sections, we often reuse original posts where they’re sound. In newer sections, we set new posts to handle the weight of a large automated gate.
Automatic Gate Installation
Signs you need it
Your current gate opens manually, or the existing opener has failed and parts are no longer available for your system.
What it costs in Coral Gables
Automatic gate installation in Coral Gables typically runs $3,500 – $8,000 depending on gate size, opener type, and access-control requirements.
How we do it
We measure the gate and opening, confirm post integrity, install the opener and arm, run power, and calibrate limits and safety sensors.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is sagging, rusted through, or too narrow for modern vehicles and the repair cost exceeds replacement value.
What it costs in Coral Gables
Driveway gate installation in Coral Gables usually falls between $4,000 – $12,000 depending on material, width, and whether it’s a swing or slide design.
How we do it
We start with a site measure, confirm the gate style and swing direction, fabricate or order the gate, set posts, hang the leaf, and install the opener and safety edges.
What Gate Installation Costs in Coral Gables
| Item | Typical range in Coral Gables |
|---|---|
| Single swing gate with opener | $3,500 – $6,000 |
| Double swing gate with opener | $5,500 – $9,500 |
| Sliding driveway gate with opener | $5,000 – $12,000 |
How much does a new gate cost in Coral Gables?
A new gate in Coral Gables typically runs $3,500 to $12,000 installed. The range depends on gate width, material, opener type, and whether the Board of Architects requires a custom match to the home’s original design. Call (855) 360-5306 for an exact quote, free.
Do you handle the permits and Board of Architects review?
We prepare the specs and drawings your project needs, and we’re familiar with Coral Gables’ review process. The homeowner or property manager submits the application, and we build to the approved design. Getting this wrong costs weeks, so we get the details right the first time.
Brands We Service in Coral Gables
We work on BFT, Linear, Viking, and Ghost Controls systems, along with five other major brands. Our techs carry common control boards, safety sensors, and remote receivers on the truck, so most electric gate repairs in Coral Gables finish same-day. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Coral Gables, FL
| Service | Typical range in Coral Gables |
|---|---|
| Gate repair service call | $75 – $150 |
| Gate opener repair | $250 – $650 |
| Control board replacement | $350 – $800 |
| Automatic gate installation | $3,500 – $8,000 |
| Driveway gate installation | $4,000 – $12,000 |
| Sliding gate installation | $5,000 – $12,000 |
| Hinge replacement | $150 – $400 per hinge |
| Safety sensor replacement | $200 – $450 |
In Coral Gables, prices push toward the upper end when a job involves custom ironwork to satisfy the Board of Architects, coral rock post work, or a long power run from the house to the gate. The price you’re quoted is the price you pay, agreed before any work starts.
Neighborhoods We Serve in Coral Gables
We cover the full city, from the historic streets of the Biltmore area to the larger lots of Gables Estates and the village-scale properties in between. Our crews know which areas have coral rock walls and which have standard block posts, and we plan the work accordingly.
- Gables Estates
- Dutch South African
- French City Village
- Biltmore area
- Cocoplum
Service Area – Cities Near Coral Gables
Archway Gate Repair has served Coral Gables since 2011, and we also cover the surrounding South Miami-Dade area. If you’re in Coconut Grove, FL, Glenvar Heights, FL, South Miami, FL, or Coral Terrace, FL, the same crew and the same upfront pricing apply. Call us and we’ll confirm the next available appointment in your neighborhood.
Serving Coral Gables, FL — Our Local Coverage Area
We’re based in the Coral Gables area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Coral Gables
For a gate stuck open or closed, we typically reach Coral Gables properties the same day or next morning. Non-emergency installation estimates are usually scheduled within a few business days. Call (855) 360-5306 and we’ll give you a real arrival window, not a vague promise.
Most gate replacements and new installations in Coral Gables go through the Board of Architects design review. We prepare specs that match your home’s era and style, which speeds up approval. Repairs to existing gates generally don’t trigger review, but we’ll tell you if yours does.
Yes. We work with local fabricators who reproduce original Coral Gables ironwork patterns, including the scrollwork and finial details common to Mediterranean Revival homes. When the original gate can be salvaged, we repair it instead. Either way, the result matches the property, not a catalog.
Call (855) 360-5306 for a free estimate on gate installation or repair in Coral Gables. We’ll diagnose the problem honestly and quote the fix before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Coral Gables Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Roger Ziegler"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Carter"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Rohan Sharma