Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pinewood, FL
Gate installation in Pinewood usually means replacing an original mid-century ornamental gate that was never built for the salt air coming off Biscayne Bay. Most of the work we do in the 33167 ZIP starts with a sagging wrought-iron swing gate or a rusted chain-link slider on a short driveway, and the homeowner wants to know whether it can be saved or should be replaced. Archway Gate Repair has served Pinewood since 2011, and our answer usually begins with a specific diagnosis: what failed, why the salt air got to it, and whether new hardware or a full automatic operator is the honest fix. Call (855) 360-5306 and we’ll walk you through what we see.
Why Pinewood Homes Are Different
Pinewood is a dense neighborhood of mid-century and 1950s-70s single-family homes with carports and short driveways. The gates here are not the big estate entrances you find further north in Broward. They are ornamental front-yard gates, driveway barriers, and the occasional side-yard chain-link gate, and many of them are original. That matters because original Pinewood gates were built for a different era: lighter hardware, no automation, and certainly no expectation that a control board would sit a few feet from salt-laden air for thirty years.
The subtropical heat and near-constant humidity do specific things here. Hinges that were never sealed corrode from the inside. Wrought iron develops rust blooms along the bottom rail where sprinkler water and morning condensation collect. Automatic operator boards short out after a few wet seasons if the enclosure was not sealed properly. And the morning sun on the bay-side blocks heats metal fast enough that paint fails early and latches seize. When we work in Pinewood, we plan for corrosion before we plan for anything else.
There is also a practical side to the housing stock: many carports and short driveways leave little room for a gate that swings outward, and the original posts are often too shallow or too rusted at the base to carry a new automatic operator. Pinewood jobs usually involve a conversation about whether the existing post can be sleeved and sealed, or whether it needs to be reset entirely before any meaningful repair or automation can happen.
Styles & brands we work with
Our Main Pinewood Services
Pinewood homeowners call us most often for two things: a gate that has stopped working entirely, or an electric gate that works sometimes and then refuses. Both are covered below.
Gate Repair in Pinewood
A manual swing gate in Pinewood usually fails at the hinge or the latch. The hinge rusts, the gate sags, the latch no longer lines up, and the homeowner starts lifting the gate to close it. We repair the gate back to level, replace the hinge or post hardware with sealed components, and adjust the latch so it closes without lifting. On many Pinewood properties the post itself is the problem: the concrete base has cracked from years of salt exposure and the post leans. We reset or sleeve the post, then re-hang the gate. The repair-first approach means we quote the honest fix, not a default replacement. See Gate Repair in Pinewood for the full range of what we fix.
Electric Gate Repair in Pinewood
Electric gates in Pinewood fail in patterns. The motor runs but the gate does not move, which usually means a stripped gear or a broken drive arm. The keypad or remote does nothing, which often points to the control board or a sensor that has been shorted by moisture. The gate opens but will not close, which is a safety sensor or loop issue. We diagnose the specific fault before we touch anything, then replace only the failed component. Because Pinewood’s humidity gets into enclosures, we pay particular attention to seal integrity on every job. See Electric Gate Repair in Pinewood for a full breakdown of what we service.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pinewood
Gate installation in Pinewood typically means replacing a corroded original gate on a mid-century home, or automating a manual gate that has survived decades of salt air but now needs an operator installed correctly. The most common scenario we see: the existing gate has sagged on original hinges, the homeowner is tired of lifting it, and the question is whether to rebuild or replace. In Pinewood we usually recommend a full replacement when the gate’s frame is rusted through at the bottom rail, because patching it just buys a season or two. Gate Installation is a core part of what we do.
Automatic Gate Installation
Signs you need it
The gate is manually opened and closed, and you are ready to stop getting out of the car in the rain.
What it costs in Pinewood
An automatic gate opener in Pinewood typically runs $1,500 – $4,900 installed, depending on the operator type and whether the existing gate can carry it.
How we do it
We check the gate’s level, weight, and post condition, recommend the operator that fits the actual gate and driveway, then install the motor, arms, control board, and safety sensors.
Driveway Gate Installation
Signs you need it
A new driveway gate is needed when the old one is rusted through, bent beyond straightening, or too light to carry an operator.
What it costs in Pinewood
A complete driveway gate with a new operator in Pinewood typically lands between $3,500 and $12,000 depending on size and material.
How we do it
We measure the driveway opening and setbacks, confirm post depth, order or fabricate the gate to fit, and hang it on sealed posts before installing and testing the automation.
Sliding Gate Installation
Signs you need it
A sliding gate makes sense when the driveway is short or the yard has no room for a gate that swings outward into the carport.
What it costs in Pinewood
Sliding gate installation in Pinewood ranges from $2,500 to $8,000 installed, with motor and track work usually adding $1,200 to $2,600.
How we do it
We set the track and guide posts on a level, well-drained base, hang the gate with anti-derailment hardware, then mount the operator and verify the full slide path.
What Gate Installation Costs in Pinewood
| Item | Typical range in Pinewood |
|---|---|
| Automatic gate opener (installed) | $1,500 – $4,900 |
| Complete driveway gate with operator | $3,500 – $12,000 |
| Sliding gate with track and motor | $2,500 – $8,000 |
How long does gate installation take in Pinewood?
Most Pinewood gate installations are completed in one to two days. Custom-fabricated gates and jobs that require new post footings add time, typically three to five days total.
Do you handle permits for gate installation in Pinewood?
We handle the gate work and will flag any permit requirements that apply to your property. Many Pinewood replacements on existing posts do not require one, but we confirm before starting.
Brands We Service in Pinewood
We work on the brand already on your property. In Pinewood we regularly service BFT, Linear, Viking, and Ghost Controls operators, plus the control boards and safety sensors that come with them. Because we know each system’s specific failure points, diagnosis is faster and we stock common parts locally. See our brands for the full equipment list we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pinewood, FL
| Service | Typical range in Pinewood |
|---|---|
| Gate repair (general) | $150 – $650 |
| Electric gate repair | $200 – $900 |
| Hinge replacement | $85 – $325 per hinge |
| Control board replacement | $475 – $950 |
| Gate opener motor | $475 – $1,300 |
| Gate sensor replacement | $150 – $400 |
| Automatic gate opener installation | $1,500 – $4,900 |
| Driveway gate with operator | $3,500 – $12,000 |
| Sliding gate installation | $2,500 – $8,000 |
| Commercial-grade gate operator | $2,200 – $7,500 |
In Pinewood, the big price movers are post rot and salt corrosion. If we have to reset a post or replace a control enclosure that was never sealed, the job costs more because the fix has to hold up to the same salt air that caused the failure. Every price is quoted and agreed before any work starts, so there is no surprise on the invoice.
Neighborhoods We Serve in Pinewood
We cover all of Pinewood’s 33167 ZIP, including the streets north of NW 103rd and the blocks closest to the bay-side air. Most Pinewood calls get a same-week visit, and emergency electric gate failures are prioritized because a gate stuck open or closed is a real problem, not an inconvenience.
- North Pinewood
- Pinewood Park
- The blocks along NW 22nd Avenue
- The 33167 corridor near NW 119th Street
- Bay-side Pinewood near the canal
Service Area – Cities Near Pinewood
Beyond Pinewood, we work regularly in the neighboring communities across the northern Miami-Dade boundary. Homeowners in Westview, FL call us for similar mid-century gate failures, while Bunche Park, FL and Opa-locka, FL properties face the same salt-humidity corrosion on original ironwork. We also cover Gladeview, FL for residential gate repair and automatic opener work.
Serving Pinewood, FL — Our Local Coverage Area
We’re based in the Pinewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pinewood
Most Pinewood calls get a same-week visit, and we prioritize emergency electric gate failures because a gate stuck open leaves the property exposed and a gate stuck closed blocks the driveway. Call (855) 360-5306 and we will schedule around the urgency, not the other way.
Some Pinewood streets have deed restrictions that apply to front-yard gate height and style. If your property falls under one, we recommend confirming with the association before installation, but most repairs on existing gates do not require approval.
Pinewood is largely residential, so most of our work there is on single-family gates and small multi-unit properties. We do handle commercial gate systems when they exist in the area, including the same brand-specific repair process we use on residential operators.
If your Pinewood gate is sagging, rusting, or refusing to open, call Archway Gate Repair at (855) 360-5306. We will diagnose the specific problem, give you an upfront price, and fix it so it holds up to the bay air.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pinewood Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ernesto Flores"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Roger Ziegler"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Carter