Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Glenvar Heights Homeowners
An electric gate that won’t open in Glenvar Heights isn’t a small inconvenience. It blocks your driveway, strands your car, and can leave your property unsecured overnight. We fix that. Archway Gate Repair is a gate-only specialist that works on the brand already on your property, from LiftMaster and FAAC to BFT, DoorKing, Elite, and more. Our team is led by Nelson Arrieta, and we handle residential and commercial electric gate repair in Glenvar Heights with same-day scheduling in most cases. Call (855) 360-5306 for a free estimate and we’ll get your gate back online.
Key Takeaways
- Specialist, not a handyman: Archway Gate Repair works exclusively on gates, including nine major brands.
- Repair-first: We diagnose the actual failure and fix it. We don’t default to replacement quotes.
- Full system coverage: Motors, control boards, safety sensors, wiring, hinges, and access control.
- Same-day scheduling in Glenvar Heights for most electric gate failures.
- Free estimates: Prices quoted and agreed before any work starts.
Styles & brands we work with
Gate Opener Repair
Gate opener repair in Glenvar Heights catches the failures most property owners notice first: the gate won’t move, it hums but doesn’t budge, or it opens halfway and reverses. The opener is the box and arm-mechanism that physically drives your gate, and when it fails you’re either locked out or locked in. Archway Gate Repair handles opener repair on residential swing and slide gates, diagnosing the motor, limit switches, receiver, and control board in a single visit. Most gate opener repairs in Glenvar Heights run $180-$420 depending on the failed component and the gate’s size. We carry common parts for LiftMaster, FAAC, BFT, and Linear systems in the truck, which means fewer second trips.
Opener Noises and Grinding
A gate opener that has started grinding, clicking, or whining is telling you something. Worn drive gears, dry chains, or a failing capacitor all sound different, and we listen before we touch anything. Catching a drive gear before it strips saves the full repair cost of a new opener.
Remote and Keypad Failures
When the gate opens fine from the wall button but not from your remote, the opener isn’t the problem. This is almost always a receiver, antenna, or programming issue, and it’s a fast fix for a technician who knows the board by sight. We reprogram existing remotes and keypads, and we’ll tell you honestly if the remote itself is simply dead.
Automatic Gate Repair
Automatic gate repair covers the entire automated system: the operator, the gate’s physical track or hinges, the safety edges and photo eyes, and every connection in between. It’s the service you need when your gate moves erratically, reverses in the middle of a cycle, or has started working only intermittently. Archway Gate Repair has done automatic gate repair on residential and commercial properties throughout Glenvar Heights, including systems with separate pedestrian gates and vehicle loops. Typical repairs fall between $150 and $400; a failed loop detector or safety sensor is usually on the lower end, while a bad motor or control board is on the higher end. From the motor to the hinge, we trace the whole system so you don’t pay for a guess.
Safety Sensors and Photo Eyes
A gate that won’t close, or closes and immediately reverses, usually has a misaligned or failing photo eye. This is a safety feature, not an optional convenience, so the gate refuses to operate if the signal is blocked or intermittent. We test the beams, alignment, and wiring to restore normal operation without bypassing any safety circuit.
Intermittent Operation
A gate that works in the morning and fails in the afternoon usually has a relay, transformer, or wire connection that is thermally sensitive. These are classic intermittent failures that a generalist will chase for hours. We’ve diagnosed the same issues on FAAC and BFT systems often enough that we go straight to the likely failure point and confirm it with a meter.
Electric Gate Motor
An electric gate motor is the component that burns out, seizes, or loses torque after years of daily cycles. It’s not the same as the opener arm; the motor is the actual electric drive unit inside or behind the operator. When the motor fails, the gate often won’t move at all, or it moves weakly and stalls. Archway Gate Repair handles electric gate motor replacement and repair for Viking, Ghost Controls, DoorKing, and Elite systems among others. Motor replacement in Glenvar Heights typically costs $325-$750 depending on the motor’s size, voltage, and whether it runs on AC or DC. We check the gate’s weight and balance before replacing a motor, because an unbalanced gate destroys a new motor within a season.
DC vs AC Motor Replacements
Modern residential gates almost always use DC motors for their soft start and stop, while older commercial gates often use AC motors for continuous duty. The wrong replacement motor type causes overheating and board damage. We spec the replacement to the original equipment, never a generic “close enough” substitute.
Burnt Winding and Seized Units
A motor that hums but doesn’t turn often has burnt windings or a seized gear stack. The motor itself is dead in the first case, and repairable in the second. We identify which one it is before quoting, because a seized gearbox and a burnt motor are two very different invoices.
Gate Access Control
Gate access control is the electronic system that decides who gets in: keypads, card readers, intercoms, vehicle loop detectors, and the control board that ties them together. When access control fails, tenants can’t get in, delivery drivers stack up outside, and the whole property notices. Archway Gate Repair services access control on residential and commercial gates in Glenvar Heights, including keypad programming, intercom wiring, and card system integration. Access control repairs typically run $150-$500, depending on whether the component is repairable or needs replacement. We work on existing DoorKing, LiftMaster, and Linear access systems, and we’re comfortable with older hardware that other companies won’t touch.
Keypads and Card Readers
A keypad that ignores your code usually has worn buttons, water intrusion, or a failed relay. A card reader that works sometimes usually has a grounding problem or a failing power supply. We test the field device and the board separately so you don’t buy a new keypad when a $12 relay is the actual failure.
Intercom and Phone Entry Systems
When the intercom rings but no one can hear, or calls fail entirely, we trace the phone line, cellular unit, or network connection depending on the system. Older hard-wired intercoms die a slow death after rain, and South Florida humidity accelerates their failure. We’ll tell you if a repair makes sense or if a replacement is the honest call.
Commercial Gate Operator
A commercial gate operator is a different animal from a residential unit: it’s rated for continuous duty, has a larger motor, and usually integrates with fire access and security systems. When one fails, you don’t have a driveway problem, you have a perimeter security problem. Archway Gate Repair services commercial gate operators throughout Glenvar Heights and nearby areas, including our Electric Gate Repair in Carol City, covering slide gates, barrier arm gates, and heavy double-swing gates. Commercial operator repair typically costs $400-$1,200, driven by the operator’s horsepower, voltage, and whether parts are available locally or need to be ordered. We know LiftMaster, BFT, and Viking commercial equipment well enough to diagnose the failure on the first visit in most cases.
Emergency Access Compliance
Commercial operators must release for fire department access, and the emergency release mechanism has to work every time. A failed release can be a code violation as well as a liability. We test the release during repair and advise on any corrections needed.
High-Cycle Maintenance Issues
A gate that cycles 300 times a day wears out chains, sprockets, and limit switches faster than any homeowner gate. We see the same failure patterns in Glenvar Heights commercial properties again and again: stretched chains, bent track guides, and limit switches that have drifted out of calibration. Scheduled maintenance beats emergency repair, but we answer both calls.
Brands We Service
We work on Viking and Ghost Controls residential operators frequently. Viking units are common on heavier swing gates in Glenvar Heights, and we’ve replaced enough of their DC motors and control boards that we can usually identify the failure over the phone. Ghost Controls systems are popular on lighter gates and are generally reliable, though their receivers develop problems after a few wet seasons.
DoorKing and Elite are the workhorses of the commercial properties we service. DoorKing slide operators have specific limit switch and chain tension issues we’ve corrected on dozens of gates. Elite swing and slide operators use a different control architecture, and we’re comfortable working inside both. Whether you have one of these brands or any other make, Archway Gate Repair can help. We repair the brand already on your property rather than steering you to a replacement.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate only opens with the manual release. If the chain or arm is still connected but the gate won’t move under power, the motor or board has failed. The release is an emergency feature, not a daily operating method.
- The gate reverses after closing. This is a safety sensor or loop detector problem. Your gate thinks something is in the way. It’s false-positive behavior, and it gets worse, not better.
- The operator hums but nothing moves. That hum is a motor or gear stack failure. The longer it hums, the more secondary damage it does to the drivetrain.
- The gate grinds when opening. A chain or drive gear that’s running metal-on-metal is chewing itself up. It may still work today. It won’t last the month.
- The keypad or remote works only from two feet away. That’s usually an antenna or receiver failure, and it means the access system is failing. It gets unreliable at exactly the wrong moment.
Our Process, Step by Step
- 1
Call and describe the problem. Our team, led by Nelson Arrieta, asks the right questions: what the gate does, whether it works from the wall button, and when the problem started. We work on the brand already on your property, so our questions are tailored to the equipment, not generic.
- 2
We arrive with the right parts. Because we know LiftMaster, FAAC, BFT, DoorKing, and the rest, we stock common failure parts in the truck. No trial-and-error on your time or dime. We diagnose, not guess.
- 3
You get a written price before any work starts. We test the system, identify the failed component, and give you a firm number. If it’s a borderline repair-versus-replace call, we’ll show you the numbers on both and let you decide.
- 4
We repair and test the entire system. After the fix, we cycle the gate multiple times, test every safety input, and check the limits and force settings. One failed part often masks another, so we don’t stop at the first fix.
- 5
We leave the site ready for daily use. You get a walking summary of what we fixed, what to watch, and what might need attention next season. We don’t leave a gate that opens but doesn’t close, or works once and quits.
How Much Does Electric Gate Repair Cost in Glenvar Heights?
Electric gate repair in Glenvar Heights typically costs between $150 and $1,200. On the low end, a failed safety sensor, keypad relay, or remote receiver repair runs $150-$300. A motor replacement or control board replacement on a residential gate runs $325-$750. A commercial gate operator rebuild or replacement can reach $1,200 or more on heavy slide gates. The final number depends on the component that failed, the gate’s size and voltage, and whether parts are in stock.
What affects the price: whether the operator is AC or DC, the gate’s weight and cycle count, and whether the failure is electrical or mechanical. A gate that has been run with a bad bearing often has secondary damage that wasn’t obvious until we inspected it. How to avoid overpaying: get a specialist who knows the brand, get a written price before any work starts, and ask the technician to show you the failed part. We do all three. Your free estimate includes the full diagnosis, so you’ll know exactly what’s wrong and what it costs, agreed before we touch a wrench. Call (855) 360-5306 for exact pricing on your gate.
Our Service Area Near Glenvar Heights
Archway Gate Repair serves homeowners and property managers across Glenvar Heights and the surrounding communities. We regularly work in Twin Lakes, Oakland Park, Sunset, Key Biscayne, Kendall, Pinecrest, and North Lauderdale. If your property sits in or near Glenvar Heights, we can typically reach you the same day you call for electric gate repair. Our home service area spans the full metro South Florida region. If you’re unsure whether we cover your neighborhood, call us and we’ll be honest about scheduling.
Serving Glenvar Heights, FL — Our Local Coverage Area
We’re based in the Glenvar Heights area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Glenvar Heights
Electric gate repair is the diagnosis and correction of failures in automated gate systems, including the motor, control board, safety sensors, wiring, keypad, and gate hardware. In Glenvar Heights, it covers everything from a gate that won’t open to one that opens but won’t close. We also provide Electric Gate Repair in Lake Lucerne for the same range of issues. The work requires knowledge of the specific brand and model installed, since control boards and wiring differ between manufacturers. Archway Gate Repair performs this work as a specialty, not a side service.
Most residential electric gate repairs in Glenvar Heights are completed in one to two hours on site, assuming the failed part is in stock or on the truck. Commercial repairs can take longer if a part must be ordered. If a part is backordered, we’ll tell you before we start, and we’ll also tell you how long the gate will be out of service. Call (855) 360-5306 and we’ll give you a realistic timeline for your system.
Most electric gate repairs in Glenvar Heights cost between $150 and $1,200. The range is wide because a failed sensor relay is a $150 repair while a burnt motor on a heavy gate is a $725 repair. We give you a written quote before any work begins, so the price is never a surprise. Call us at (855) 360-5306 for a free estimate based on your exact system.
Yes. We service DoorKing, LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, Elite, and Mighty Mule gates. Our team has worked on these systems long enough to know their specific failure patterns before arriving on site. That means faster diagnosis and fewer wasted parts. We work on the brand already on your property.
In most cases, yes. We keep same-day scheduling open for electric gate failures in Glenvar Heights. A gate that won’t close is a security risk, and we treat it that way. Call (855) 360-5306 as soon as you notice the problem, and we’ll work with your schedule to get a technician out quickly.
Yes. We stand behind our work with a warranty on parts and labor for every repair. The exact term depends on the part and manufacturer, and we’ll put it in writing before we begin. A repaired component that fails under warranty is corrected at no cost to you. Ask us about warranty terms when you call for your estimate.
Clear the area around the gate and operator so our technician has safe access, and have any remotes or keypad codes ready for testing. If the gate is stuck closed, make sure vehicles are out or plan to leave the gate in manual mode while we work. Do not attempt to force the gate open or disconnect the operator arm if the gate is under tension. Our electric gate repair team in Glenvar Heights will handle the rest.
Schedule Your Electric Gate Repair Service in Glenvar Heights Today
A broken electric gate won’t fix itself and it won’t get cheaper. Call Archway Gate Repair at (855) 360-5306 for a free estimate and we’ll schedule an electric gate repair in Glenvar Heights at a time that works for you. The diagnosis is no-charge, the price is agreed before work starts, and the technician who shows up knows your gate brand. Repair first, replace only when necessary.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Glenvar Heights and surrounding South Florida communities.