Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Sunrise, FL
Gate installation in Sunrise usually runs $2,800 to $8,500 for a complete driveway system, with most powder-coated aluminum single swing gates landing between $3,200 and $5,400 installed. Archway Gate Repair has served Sunrise since 2011, and we handle the full job: footing, posts, gate fabrication or ordering, operator mounting, safety sensors, and final HOA-ready cleanup. Call (855) 360-5306 for a free measure and a written price before any work starts.
A Sunrise gate installation is rarely a simple swap. Most of the city’s housing stock dates to the 1970s through 1990s, which means existing posts are often undersized for today’s wind-load requirements, original operator conduits are degrading, and HOA architectural review committees want spec sheets before approval. We’re familiar with the paperwork side of Sunrise jobs because we’ve been doing them for over a decade.
Why Sunrise Homes Are Different
Sunrise sits inside Broward County’s high-velocity hurricane zone, and that single fact changes how every gate gets installed and repaired here. A swing gate panel in Sunrise is not just a barrier; it’s a wind-load surface that has to be engineered for 170+ mph gusts, anchored to concrete footings deep enough to resist uplift, and fitted with hardware that will not shear when a storm pushes on it. We see the failure mode every August through October: bent tracks on slide gates, hinges pulled from posts, latches that no longer line up because the post shifted half an inch. Salt-laden humidity does the slower damage, eating through non-stainless hardware and corroding operator boards inside enclosures that were never sealed properly.
The other half of the Sunrise equation is the community structure. Sawgrass, Sunrise Lakes, Sunrise on the Green, and dozens of smaller master-planned and 55+ communities run on deed restrictions and architectural review committees. A gate replacement on Sunrise Lakes Boulevard Phase 3 does not start with a tape measure; it starts with the ARC color palette, the approved vendor list, and sometimes a board meeting. We’ve learned to submit photos, cut sheets, and mounting details in the format Sunrise HOAs expect, because half the job is making the board comfortable with the work. That local knowledge keeps a two-day installation from becoming a six-week approval process.
Styles & brands we work with
Our Main Sunrise Services
Most Sunrise calls start with one of two problems: a gate that quit moving, or a gate that moves but should not. Here are the two services Sunrise homeowners and property managers call us about most often.
Gate Repair in Sunrise
A sagging swing gate or a slide gate that binds halfway through its travel usually points to specific wear: worn hinge pins, rusted rollers, a bent track, or a post that has moved in soft Broward soil. Sunrise’s humidity accelerates all of it. We work on the brand already on your property, diagnose the actual failure, and repair first, replacing only what cannot be saved. That includes everything from a simple latch realignment to a full track replacement with new post anchoring. Gate Repair in Sunrise covers the full mechanical side.
Electric Gate Repair in Sunrise
When a LiftMaster or FAAC operator stops responding, the cause is usually one of four things: a dead capacitor, a failed control board, a blown fuse after a storm surge, or a safety sensor knocked out of alignment. We handle the wiring, the board, the motor, and the sensors without referring any of it out. Electric gate repair is our core specialty, not an add-on. See Electric Gate Repair in Sunrise for the full breakdown of how we troubleshoot openers in this climate.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Sunrise
Gate installation in Sunrise means building for hurricane wind loads, HOA approval, and a housing stock where original 1980s and 1990s operators are reaching the end of their service life. Most Sunrise homes were built before current high-velocity wind-zone anchoring standards took effect, so a proper installation here almost always includes new footings, larger posts, and hardware rated for impact and corrosion. A retrofit job on a 1980s Sunrise Lakes villa typically runs $3,200 to $5,400 for a single swing gate; a full sliding driveway system with a new opener starts around $4,800 and can reach $8,500 depending on length and automation. We measure, quote a written price, and do the full install ourselves. For more on our approach, see Gate Installation.
Automatic Gate Installation
Signs you need it
Your current gate opens manually, or the existing operator has failed in a way that would cost nearly as much to rebuild as a new system would.
What it costs in Sunrise
Automatic gate installation in Sunrise runs $4,800 to $11,000 for a complete swing or slide system with opener, safety loops, and controls.
How we do it
We confirm your HOA’s approval requirements, then set footings, mount the gate and operator, run power, install safety loops or photo eyes, and dial in the travel limits and force settings.
Sliding Gate Installation
Signs you need it
Your driveway has a slope or limited swing clearance, or the existing slide gate’s track is bent, the rollers are shot, and the repair keeps failing.
What it costs in Sunrise
Sliding gate installation in Sunrise typically costs $5,500 to $12,000, depending on gate length, weight, and whether you need a cantilever or track design.
How we do it
We set the post foundations and track (or cantilever frame), hang the gate, mount the operator and rack, wire the controls and safety edges, and test the full travel cycle repeatedly before we leave.
What Gate Installation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Single swing gate, manual | $1,500 – $3,500 |
| Automatic gate installation, complete | $4,800 – $11,000 |
| Sliding gate installation, complete | $5,500 – $12,000 |
What pushes a Sunrise gate installation toward the top of those ranges? Three things: gate length and weight (a 16-foot sliding driveway gate costs materially more than an 8-foot swing gate), the condition of the existing posts and footing (we often have to pour new ones to meet wind-load code), and HOA finish requirements like specific powder-coat colors, decorative pickets, or finials. The opposite is true, too: a straight manual gate swap on solid existing posts lands at the low end, and we’ll tell you that when we see it.
Does a new gate installation in Sunrise need an HOA approval?
In most Sunrise communities, yes. A new gate changes the look of the property, so the architectural review committee usually needs photos and a spec sheet before the work starts. We can prepare that package for you.
How long does a complete gate installation take in Sunrise?
Most installations finish in one to two days on site, but HOA approval can add a week or two before we can schedule. We quote the labor separately from the approval delay, so you know exactly what to expect.
Brands We Service in Sunrise
We’re factory-familiar with LiftMaster, FAAC, BFT, and Linear operators, which cover a large share of the automated gates across Sunrise. We keep common control boards, capacitors, safety sensors, and radio receivers in local stock, so a failed LiftMaster board does not mean a ten-day wait for a parts shipment. In most cases we can have a Sunrise gate back online the same day we diagnose it. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Gate repair, mechanical | $160 – $720 |
| Electric gate opener repair | $250 – $950 |
| Control board replacement | $550 – $1,600 |
| Hinge replacement | $180 – $550 |
| Track repair | $250 – $850 |
| Manual swing gate install | $1,500 – $3,500 |
| Automatic gate installation, complete | $4,800 – $11,000 |
| Sliding gate installation, complete | $5,500 – $12,000 |
Prices in Sunrise run higher than inland Broward because of the wind-load anchoring requirements and the cost of corrosion-resistant hardware that holds up in salt air. That said, we quote every job up front, in writing, and the number we agree on is the number you pay before any work starts. No open-ended labor, no surprise line items.
Neighborhoods We Serve in Sunrise
We work across all of Sunrise’s 33304 ZIP and the surrounding area, from the gated sections of Sawgrass and Sunrise Lakes to the villa communities around Sunrise on the Green and the single-family neighborhoods near Nob Hill Road. Our response windows run the same everywhere in the city: repair calls are typically scheduled next-day unless it’s a storm emergency, and installations are booked on a measured, written-quote basis.
- Sawgrass
- Sunrise Lakes
- Sunrise on the Green
- Springtree
- Welleby
Service Area – Cities Near Sunrise
Archway Gate Repair serves Sunrise and the surrounding Broward communities. We work in Wilton Manors, FL, Boulevard Gardens, FL, Rock Island, FL, and Roosevelt Gardens, FL. If your community is on the edge of Sunrise, call and we’ll let you know which schedule covers your street.
Serving Sunrise, FL — Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sunrise
For storm damage or a security failure where the gate will not close, we prioritize Sunrise calls and can usually have a technician on site next business day at the latest. Routine service calls are scheduled in a regular window, and emergency work after a hurricane is triaged by severity across the area.
We do. A large share of Sunrise gates sit inside deed-restricted communities, so we prepare cut sheets, color samples, and mounting details in the format HOAs here typically request. That documentation package is included with installation quotes, not billed separately.
We cover the full city, including the 33304 ZIP and every major community inside it: Sawgrass, Sunrise Lakes, Sunrise on the Green, Springtree, and Welleby, plus the commercial and multifamily properties along University Drive and Oakland Park Boulevard.
If your gate is failing, sagging, or simply worn out, call Archway Gate Repair at (855) 360-5306. We’ll diagnose the actual problem, give you a written price, and fix it right the first time. From the motor to the hinge.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Laura Schaefer"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Danika Ellison"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Chris Padgett