Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Margate, FL | Archway Gate Repair
We provide independent Ghost Controls gate repair across Margate, and the thing that makes our work here different is that most calls come from HOA and villa communities where the repair has to pass association review and, often, Florida pool-barrier inspection. We fix the operator, then we make sure the gate latches, self-closes, and closes evenly so you aren’t fighting a compliance recheck two weeks later. If your Ghost Controls swing gate on Rock Island Road or Atlantic Boulevard is dead, drifting, or stalling at dusk, call (855) 360-5306. We know this brand. We know Margate.
Why Margate Residents Choose Us for Ghost Controls Service
We work on the brand already on your property. Ghost Controls operators show up all over Margate because they’re the go-to builder-grade and DIY-friendly choice for single and dual driveway gates, and because so many townhome and villa communities here were built out between the 1970s and 1990s, we see a lot of original operators that are now 15 to 30 years old. Nelson Arrieta, our owner, has spent more than two decades working gate systems across South Florida, and he built this company around a repair-first approach: diagnose the actual failure, fix what failed, and replace the unit only when it genuinely makes sense. We aren’t authorized or sponsored by Ghost Controls. That independence matters in Margate, because it means we tell you when a $200 control board fix gets your gate back online instead of quoting a full operator replacement.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Margate
We diagnose Ghost Controls issues daily, and in Margate the humidity, salt air, and storm patterns push certain failures to the top of the list.
- Control-board failure after lightning and summer storms. South Florida’s afternoon thunderstorms bring power surges that hit the board before the operator. The gate sits dead, or cycles randomly, and the fix is board-level repair or replacement rather than a whole new unit.
- Battery and solar-charge faults in hybrid TDS2 kits. Aging or undersized batteries stop holding charge, so gates stall or slow at dusk. Corroded solar leads at the terminal block make it worse in Margate’s salt-laden air. We test the battery, the panel, and the connections before touching the operator.
- AXDP tube arm and pivot-bushing wear. On older ornamental steel gates that have sagged over the years, tube arms wallow out at the pivot. The gate binds mid-travel, trips the limit switch, and stops partway. We reset travel limits and replace the worn bushing hardware.
- Corroded control-box enclosures, limit switches, and fasteners. Canal-side humidity in Margate eats through connectors and enclosures faster than inland. Moisture intrusion also wipes keypad and remote receiver programming, which is why we reseal every connection we touch.
- Pool-safety gate compliance after repair. Margate’s older villa communities fail pool barrier code on self-closing, self-latching, or latch height all the time. When a Ghost Controls swing operator powers a gate adjacent to a pool enclosure, we reset it so it still self-closes and latches for inspection.
Ghost Controls Service in Margate: What Local Conditions Mean for Your Equipment
Here’s the thing about Margate that changes how Ghost Controls repair work plays out here: a lot of these operators are mounted on gates that also serve a pool enclosure or a community pool access point. Florida pool barrier code requires self-closing, self-latching gates with the latch at a specific height, and Margate’s older villa and 55+ communities get cited on this constantly. So when we dial in a Ghost Controls swing operator on a property near Rock Island Road, we aren’t just making sure it opens and shuts. We’re adjusting the arm limits so the gate closes fully every time, confirming the latch catches at the right height, and testing the self-closing function so the association can pass its next inspection. A gate that powers open but drifts short of the strike is a failure here even if it looks like it “works.” We set it up to pass inspection, not just to move.
Ghost Controls Models & Products We Service in Margate
Our techs are factory-familiar with the Ghost Controls product lines most common on Margate properties: the TDS2 dual-swing solar or AC hybrid kits with AXDP tube arms, the TSS1 single-swing opener kits, AXDP and ARDT tube and articulated arm assemblies, and the Heavy-Duty and Architectural series swing operator kits. We stock OEM Ghost Controls boards, arms, and batteries for fast local turnaround, and when a hinge, latch, or fastener isn’t something the OEM needs to own, we use quality aftermarket hardware instead. What matters is getting your Margate gate closing properly against the strike and passing whatever inspection your community requires. We would for an in depth look at how we handle the brand across all models, see our full Ghost Controls sales & service page.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Margate
- Diagnostic service call: $75 – $125, applied to the repair when you approve the work
- Control board replacement: $180 – $340, board included
- Battery replacement (hybrid solar kits): $80 – $160 per battery, depending on capacity
- AXDP arm or pivot-bushing replacement: $120 – $220 per arm assembly
- Limit switch reset and full travel adjustment: $60 – $110
- Solar panel lead cleaning and reseal: $40 – $90
The quote is agreed before any work starts. The biggest variables are whether the board took the surge or the battery died first, and how much corrosion has worked into the enclosure. Call (855) 360-5306 and Nelson or one of our techs will give you a free estimate based on what’s actually on your gate, not a menu-price guess.
Serving Margate, FL — Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Ghost Controls Gate Repair in Margate
My Ghost Controls gate opens fine on sunny days but stalls every evening – what’s wrong?
That’s almost always a battery or solar-charge fault in the hybrid kit. The battery isn’t holding charge, so the gate loses power once the panel stops producing. In Margate’s salt air, corroded solar leads at the terminal block make it worse. We test the panel, the battery, and the charging circuit, then replace only what failed. Call (855) 360-5306 for a quick diagnosis, free estimate included.
Can you repair the Ghost Controls control board, or do I need a whole new operator?
We can repair or replace the control board. Board-level failures after lightning or storm surges are common in Margate, and a board replacement usually runs $180 to $340, which is a lot less than a full operator. We only recommend replacing the whole unit when the operator is old enough that other components are going to keep failing.
Will fixing my Ghost Controls swing operator affect my pool gate inspection?
Only if it’s done carelessly. Florida pool barrier code requires self-closing, self-latching gates at the correct latch height, and Margate’s older villa communities fail this inspection frequently. We reset the arm limits so the gate closes fully each time, confirm the latch height is correct, and test the self-closing function before we call the job done.
Do I need Broward County product approval if you replace my Ghost Controls operator?
Often, yes, for gate replacement work in Margate. Broward County product approval applies to many structural gate components, and hurricane-season wind-load rules mean replacement often needs approved product. We handle this for the associations we serve, and we will tell you upfront if your project requires it. Call (855) 360-5306 and we will walk you through what your community will need.
Can you add a keypad or phone entry to my Ghost Controls gate?
Yes. Many Margate HOAs want keypad or phone entry added to an existing Ghost Controls operator, and we do that regularly. The main issue is moisture intrusion into the receiver or keypad housing, so we seal everything for Margate weather. Contact us at (855) 360-5306 and we will match the right access hardware to your current system.
Service Areas Near Margate
We serve Margate and the surrounding Broward and South Florida communities from our Margate service area hub. That includes gate work in Ghost Controls service in The Crossings, Ghost Controls service in Terra Mar, plus Hialeah Gardens, Hollywood, Cooper City, and the beachside communities along the coast. If your Ghost Controls gate is acting up and you’re near any of these areas, call us. We will come out.
Book Your Ghost Controls Service in Margate Today
If your Ghost Controls gate is dead, stalling, or failing to latch, call Archway Gate Repair now at (855) 360-5306. We offer same-day service for urgent repairs across Margate and will get your gate closing properly and passing inspection before you know it.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Margate and South Florida for over two decades.