Ghost Controls Gate Repair in Pompano Beach, FL

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Repair in Pompano Beach, FL | Archway Gate Repair

Pompano Beach Gate Repair for Ghost Controls is what we handle every week, from dead solar operators on canal-front streets to swing arms binding on older stucco columns inland. We’re an independent Pompano Beach gate shop, not a Ghost Controls authorized dealer, which means we diagnose what actually failed on your system instead of steering you toward a full replacement kit. Call us at (855) 360-5306 when your Ghost Controls gate stops cycling, stalls mid-swing, or throws low-voltage faults after a storm.

Professional contractor applying sealant to repair a crack on a gate pillar in Pompano Beach, FL

Call (855) 360-5306

Why Pompano Beach Residents Choose Us for Ghost Controls Service

We read Ghost Controls control boards, size their solar panels for South Florida sun, and pair their operators with hinges and posts built to survive salt air. That matters in Pompano Beach because a Ghost Controls kit installed inland in Coral Springs behaves differently than one a block off the Intracoastal in 33062. Nelson Arrieta, our owner, spent years working through every gate brand South Florida throws at you, from rusted swing arms on older HOA properties to modern linear actuators on commercial lots. He grew up near Norwood in Miami Gardens and trained in electrical systems and industrial mechanics at Miami Dade College’s North Campus, which is why we approach a gate problem as an electrical diagnosis first, not a parts sales pitch. If we show up in Pompano Beach and see a Ghost Controls operator, we already know its likely failure points before we open the box. That’s the advantage of working with specialists, and it’s why we keep OEM boards on the truck instead of ordering them after a lightning strike.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Common Ghost Controls Gate Repair Problems We Solve in Pompano Beach

  • Solar-charge and battery failures. Pompano Beach gets heavy summer storm clouds, and a solar panel shaded by palms or a stucco wall leaves the 12V battery undercharged. The arm stalls mid-swing and the board throws a low-voltage fault. We test the panel output, the charge controller, and the battery under load before replacing anything.
  • Lightning and surge damage to the control board. A single summer thunderstorm on the barrier island can take out an entire street of solar operators at once. We find blown control boards and cooked charge controllers rather than mechanical wear. This is such a regular Pompano Beach pattern that we carry spare boards on the truck from May through October.
  • Corroded arm hardware and pivot pins. The coated steel output arm, pivot bushings, and limit hardware pit and seize in constant salt spray on 33062 canal-front and beachside lots. The motor is often still healthy; the arm just can’t move freely anymore. We replace the worn hardware with marine-grade stainless and re-grease the pivots.
  • Water intrusion and insect nesting in control boxes and keypads. Pompano Beach humidity and rain get into enclosures and arm boots, and mud-daubers love a Ghost Controls box. We regularly pull nests and corroded terminals out of these enclosures, then seal the box properly so the next storm doesn’t finish the board off.
  • Tube-gate and post flex on aging masonry walls. Operators anchored to stucco-over-block columns that have shifted over decades make the arm bind and trip the board’s obstruction sensing. Owners misread that as an operator failure, but the real problem is the post. We reinforce the mounting point before the Ghost Controls arm goes back on.

Ghost Controls Service in Pompano Beach: What Local Conditions Mean for Your Equipment

Pompano Beach splits into two gate worlds, and Ghost Controls owners live in both of them. East of the Intracoastal in 33062, salt-laden ocean air eats through operators, hinges, and steel posts fast enough that annual service is normal. On the barrier island and canal-front streets, Ghost Controls operators die from lightning surge and salt corrosion long before the motor wears out, which is why we carry spare control boards and charge controllers on the truck rather than ordering them after a storm. A homeowner on a canal-front street off 33062 called us after a July thunderstorm left her Ghost Controls solar dual-swing gate dead in the open position. We found a blown control board, a charge controller with lightning-surge damage, and a pitted, stiff output arm on the salt-side leaf. We swapped in an OEM board and charge controller, cleaned and re-greased the pivot bushings, replaced the arm hardware with marine-grade stainless, and re-aimed the solar panel out of the palm shade. The gate was cycling on battery and sun the same afternoon. Inland in 33060, 33064, and 33069, the story is different: developers and flippers have been adding driveway and pool gates to mid-century concrete-block and stucco homes during the city’s redevelopment wave. Those Ghost Controls operators sit on aging stucco-over-block columns that shift, making the arm bind and trip the obstruction sensing. A Pompano Beach gate tech has to be as fluent in salt-air corrosion remediation on the barrier island as in retrofitting operators onto decades-old masonry walls inland. That’s the work we do every week.

For full details on our Ghost Controls sales & service coverage across South Florida, see our brand page. We’re the independent shop that works on the brand already on your property, no matter which side of the Intracoastal you’re on.

Ghost Controls Models & Products We Service in Pompano Beach

We service the full Ghost Controls residential line, including Heavy-Duty Dual Swing (TDS series) operator kits, Single Swing (AXS/ARS series) kits, and the Solar-Powered swing operator packages with panel and battery. We also handle the accessory line: keypads, photo-eye kits, and tube-gate brackets. For parts, we stock OEM Ghost Controls control boards, charge controllers, solar panels, and battery harnesses because their low-voltage electronics are not a place to improvise. We pair those OEM electronics with quality aftermarket arms, hinges, and marine-grade stainless fasteners that hold up better in Pompano Beach salt air than the factory-coated hardware. If the board, panel, and arm are all casualties of one surge or a decade of corrosion, we tell you honestly that replacing the kit is the cheaper path. But a healthy operator with a dead battery or one seized hinge gets repaired, not scrapped. Repair first, replace only when necessary.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Service Pricing in Pompano Beach

Ghost Controls gate repair in Pompano Beach typically runs between $180 and $340 for common board, battery, and hardware fixes. A solar panel replacement usually lands between $250 and $450 depending on the wattage and mounting situation. A full control board and charge controller swap after a lightning strike runs $260 to $480 with OEM parts. If the operator is beyond saving and you need a complete new Ghost Controls kit installed, that’s $1,000 to $2,400 depending on whether it’s a single or heavy-duty dual swing and whether solar is involved. Every price is quoted and agreed before we start any work, never after. Call (855) 360-5306 for a free estimate on your specific Ghost Controls setup in Pompano Beach. We’ll tell you what it costs before the first screw comes out.

Serving Pompano Beach, FL — Our Local Coverage Area

We’re based in the Pompano Beach area and know this community well, and we also handle Ghost Controls repair in Margate. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

Professional contractor applying sealant to repair a crack on a gate pillar in Pompano Beach, FL

FAQs – Ghost Controls Gate Repair in Pompano Beach

Service Areas Near Pompano Beach

We serve Ghost Controls owners across Pompano Beach and the surrounding area. That includes Hollywood, Sunny Isles Beach, Bay Harbor Islands, Cooper City, and Bal Harbour. If you’re in Coconut Creek, see our Ghost Controls service in Coconut Creek page. For southwest Miami-Dade, we also cover Ghost Controls service in The Hammocks. And for full local coverage details, check our Pompano Beach service area page.

Book Your Ghost Controls Service in Pompano Beach Today

If your Ghost Controls gate is down, stalling, or throwing faults after a Pompano Beach storm, call (855) 360-5306. We diagnose before we sell, quote before we work, and repair before we replace. Same-day service is available when we have a tech in your part of Pompano Beach.

Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Pompano Beach and South Florida with independent Ghost Controls service.

Need Gate Repair help in Pompano Beach? Licensed & insured · same-day response · free estimates
Call (855) 360-5306
Areas We Serve

Request a Free Estimate in Pompano Beach

Tell us what you need — Archway Gate Repair responds fast. No obligation.

By providing your information above, you agree to our Privacy Policy and authorize us to contact you by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch