Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Palm City, FL | Archway Gate Repair
If your Ghost Controls gate opener stopped working in Palm City, we can usually get it running again the same day we arrive. We’re an independent Ghost Controls service provider covering all of Palm City, from the gated communities off Martin Downs to the horse properties along Citrus Boulevard. Our trucks carry spare Ghost Controls control boards, photo-eyes, and battery backups because in this climate, a quarter-mile walk to a dead gate operator isn’t something we want you making twice. Call (855) 360-5306 for a service visit.
We’re Archway Gate Repair, and Ghost Controls is one of the nine gate brands our technicians work on every week. That brand familiarity matters when your opener is acting up. We know the failure patterns on Ghost Controls AXS1, AXS2, TDS2, and DTP1 operators before we even pull into your driveway. If you’re in Palm City and the gate won’t open, opens halfway, or reverses for no reason, we can diagnose it without the trial-and-error you’d get from a general handyman. We also handle Ghost Controls sales & service for full replacements when a unit has reached the end of its life.
Nelson Arrieta, our owner, has been working on gate operators in South Florida for over two decades. He grew up around Miami Gardens, studied electrical systems and industrial mechanics at Miami Dade College’s North Campus, and has spent years fixing every gate brand this region throws at a technician. His approach is simple: diagnose the actual fault, replace only what’s broken, and quote the price before any work starts.
Why Palm City Residents Choose Us for Ghost Controls Service
Palm City isn’t a typical suburban market for gate repair. Most of our calls here involve long-span driveway swing gates or slide gates at the end of private lanes, often paired with farm entrances or HOA access points, which is why we offer dedicated Palm City Gate Repair. We know the specific ways Ghost Controls equipment behaves in that environment: salt-laden humidity creeping into control boards, UV-baked keypads, photo-eyes fogging after a hard afternoon storm.
We’re a gate-only shop. We don’t do fencing, we don’t do garage doors, and we don’t take side work on unrelated trades. Every service call we take in Palm City is a gate call, and a big share of those are Ghost Controls openers, including Port Salerno Ghost Controls service calls we route through the same team. That focus means we stock the parts that matter here. Spare control boards. Marine-sealed photo-eyes. Battery backups for operators that sit far from the house. When we show up for a Ghost Controls repair, we bring the parts we’re most likely to need, not just a multimeter and a clipboard.
We are an independent Ghost Controls service provider. We are not factory-authorized, not a dealer, and not affiliated with the manufacturer. What that means for you: we recommend the fix that’s best for your gate, not the fix that moves inventory. If a board is fried but the motor is sound, we repair. If corrosion has eaten through the housing, we’ll tell you straight and quote a replacement sized correctly for your gate.
Nelson’s most repeated line on service calls is, “If I’ve seen the brand, I’ve already seen the problem.” Ghost Controls operators have quirks we’ve learned over years of field diagnoses, and that familiarity saves Palm City homeowners both time and parts guesswork.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Palm City
- Corroded control boards and battery terminals. Salt-laden humidity from the nearby coast works its way into outdoor enclosures. We see intermittent operation or complete failure after summer storms, especially on operators mounted at the gate, exposed to blowing rain. We clean and treat boards where possible, and replace them when corrosion has compromised the circuits.
- Photo-eye misalignment and water intrusion. Heavy rain and wind-driven spray fog the lenses or knock the alignment out by half an inch. Your gate then reverses or refuses to close. On Palm City’s long drives, this often happens right after a storm system moves through. We align, dry, and replace photo-eyes with marine-sealed units when needed.
- Keypad and remote receiver failure. Outdoor keypads on Palm City gates take direct sun and daily moisture. Ghost Controls keypads are dependable, but UV degradation and moisture eventually cause intermittent button response or dead codes. We replace keypads and receivers with OEM units.
- Limit switch drift on long-span swing gates. Windstorms push and pull at wide gates, and over time the limit settings drift. The gate over-travels, under-travels, or stops in the wrong spot. We re-set and re-test limits so your Ghost Controls AXS1 or AXS2 opens fully without slamming the stops.
- Battery backup failure on remote operators. Ghost Controls operators have battery backup options, and on Palm City horse properties, the operator often sits a long way from the house. If the battery fails, the gate goes dead when the power drops. We test battery condition on every call and replace aging units before hurricane season puts them to the test.
Ghost Controls Service in Palm City: What Local Conditions Mean for Your Equipment
Palm City’s horse properties often have gate operators at the end of quarter-mile drives on roads like Citrus Boulevard. That’s a long walk in the rain when your gate won’t open. It also means the Ghost Controls control board and battery backup sit a quarter-mile from the house, exposed to salt air and blowing rain with nobody checking on them between failures. We know this and build every service call around it. Our trucks for Palm City runs carry spare Ghost Controls boards, photo-eyes, and batteries specifically because a single failed control board on a long drive can strand a resident at the end of their own road. We also check manual-release function as a matter of course. If the opener fails, you should still be able to move the gate by hand. On long Palm City drives, that manual release is often rusted open or seized from disuse, and we make sure it works before we leave.
On a Martin Downs equestrian property, our crew diagnosed a Ghost Controls AXS2 that would open but not close. The photo-eyes were fogged and misaligned after a storm. We replaced both photo-eyes with marine-sealed units, dried and treated the control board, and tested battery backup and manual release. The homeowner’s daily ride-outs depend on that gate working, and it did again by the time we packed up.
This is the recurring reality of Ghost Controls repair in Palm City: hurricane season pushes these operators hard. Heavy rain, wind-driven debris, power flickers, and salt air all contribute to failures that a technician in Orlando never sees. We serve the full Palm City service area, and we schedule our storm-season readiness checks with this specific climate in mind.
Ghost Controls Models & Products We Service in Palm City
We work on the full line of Ghost Controls residential swing and slide operators, including the AXS1 single-swing opener, the AXS2 dual-swing opener, the TDS2 dual-swing opener, and the DTP1 slide gate opener. We carry genuine Ghost Controls control boards, photo-eyes, and battery backups for direct-fit reliability on these models.
For hinges and mounts, we use marine-grade aftermarket hardware when it extends service life in Palm City’s salt air. That’s our parts philosophy: OEM parts where direct fit and function matter, upgraded hardware where corrosion resistance matters more. If your Ghost Controls unit has a fried board and a sound motor, we repair. If corrosion has compromised the housing and motor together, we recommend replacing with a Ghost Controls unit correctly sized for the gate.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Palm City
Ghost Controls gate repair in Palm City typically ranges from $150 to $400 for the service call and common parts. A control board replacement can push the total higher, while photo-eye replacement usually lands on the lower end. Slide gate repairs on long DTP1 applications sometimes run more due to track and roller work.
Every job gets a written quote before we start. You’ll know the diagnostic fee, parts cost, and labor total upfront. No surprise invoice at the end. We don’t pad hours and we don’t sell parts you don’t need. Call (855) 360-5306 for an exact quote. Estimates are free.
Serving Palm City, FL — Our Local Coverage Area
We’re based in the Palm City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Palm City
The photo-eyes are usually the culprit. Heavy rain fogs the lenses or pushes them slightly out of alignment, so the opener thinks something is in the gate’s path and refuses to close. We dry or replace the photo-eyes with marine-sealed units and re-align them on-site. If rain keeps causing this, call (855) 360-5306 and we’ll seal the housings properly.
Sometimes. If the corrosion is surface-level, we can clean, dry, and re-coat the board. If the corrosion has reached the traces or fried a component, we replace it with a genuine Ghost Controls board. Palm City’s salt air makes board corrosion a regular failure mode here, so we carry spares on every service run, just as we do for Ghost Controls service in North River Shores.
We test the battery’s charge and health on every call. On quarter-mile drives, a dead battery means the gate goes down the moment utility power fails. We replace aging Ghost Controls battery backups before hurricane season and verify that the unit switches to battery power without dropping the gate.
It’s usually moisture or UV damage on the keypad membrane or its internal contacts. Outdoor-mounted keypads in Palm City face daily sun and rain. We replace Ghost Controls keypads with OEM units and reseal the mounting point. If the receiver is the issue, we replace that too.
Yes. Farm gates, slide gates, long driveway swing gates, and HOA entry points are our bread and butter in Palm City. We service the DTP1 slide opener alongside the AXS and TDS swing models. Ghost Controls operators on farm and ranch entrances get the same upfront pricing and parts-stocked service as residential calls.
Service Areas Near Palm City
We cover Palm City and nearby communities in Martin and St. Lucie counties. Looking for service just outside Palm City? We also handle Ghost Controls service in Stuart and Ghost Controls service in Orangetree.
Book Your Ghost Controls Service in Palm City Today
Call (855) 360-5306 to schedule your Ghost Controls gate repair in Palm City. We offer same-day service for urgent failures and free estimates on every job.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Palm City for over two decades.