Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Sewall’s Point, FL | Archway Gate Repair
We provide independent Ghost Controls gate repair in Sewall’s Point, FL, specializing in the salt-driven failures that define this barrier island. On a peninsula where the Indian River and St. Lucie Inlet wrap every property line in marine air, Ghost Controls operators fail from corrosion long before mechanical wear sets in. Our techs diagnose the actual failure before recommending any part. Call (855) 360-5306 for a free estimate.

Archway Gate Repair works on Ghost Controls solar and AC driveway operators every week across Martin County’s barrier island. We know their control boards, limit settings, and safety-reverse behavior from the inside out. We’re an independent repair shop, not authorized or sponsored by Ghost Controls, which means we answer to you, not a manufacturer’s parts inventory. From Ghost Controls sales & service to full-system diagnostics, we handle the brand already on your property.
Why Sewall’s Point Residents Choose Us for Ghost Controls Service
Most gate companies in Martin County see a Ghost Controls opener once a month. We see them weekly across Sewall’s Point service area, which means our techs show up already knowing the failure points. Nelson Arrieta, our owner, grew up around slide gates and spent years at Miami Dade College’s North Campus studying electrical systems and industrial mechanics before working through every gate brand South Florida throws at him. If I’ve seen the brand, I’ve already seen the problem. That’s not marketing, it’s just what two decades of gate work does to your diagnostic instincts.
We fit genuine Ghost Controls boards, arms, and receivers where the originals are serviceable, and quality aftermarket batteries and hardware where OEM adds no value. On this built-out peninsula, most Ghost Controls units are worth repairing rather than replacing. We only recommend a new operator when the housing and gearing are corroded past saving.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Sewall’s Point
- Corroded control board terminals and battery leads. Salt-laden onshore air off the Indian River gets into the operator housing and eats at the board connections from the outside in. What starts as intermittent operation becomes a dead opener on a waterfront lot within a season or two.
- Solar-charged kits undercharging on shaded estate driveways. Walled compounds and mature canopy on Sewall’s Point lots block the sun that Ghost Controls solar panels need. High humidity compounds it, so the battery backup sags and the gate stalls mid-travel.
- Limit switches and arm-mount hardware drifting on heavy custom leaves. Long, heavy ornamental iron and aluminum gates put real stress on limit settings. When they drift, you get incomplete open/close cycles and safety-reverse faults that stop the gate at the worst possible moment.
- Keypad and remote receiver boards failing before the mechanical operator. On salt-exposed entry posts, the electronics die first. You get a working gate that won’t accept a code and a remote that works only when you’re ten feet away.
- Storm-driven moisture intrusion after hurricane season. Wind-driven rain gets past seals that salt air has already compromised. Post-storm gate realignment and terminal resealing are routine seasonal work here, not emergency add-ons.
Ghost Controls Service in Sewall’s Point: What Local Conditions Mean for Your Equipment
Because Sewall’s Point is a built-out barrier-island peninsula between the Indian River and the St. Lucie Inlet, almost none of the Ghost Controls operators here are on new installs. They’re older units on walled estate lots where salt corrosion, not mechanical wear, is the reason a gate stops working. This changes how we approach every service call. On a new-build lot inland, a dead opener usually means a failed arm or a stripped gear. On Sewall’s Point, we go straight for the board terminals, battery leads, and receiver contacts first, because that’s where the marine air does its damage. The same diagnosis wouldn’t hold in Stuart or Palm City, where humidity exists but onshore salt spray off the inlet doesn’t sit on your operator housing every afternoon.
On a walled waterfront estate off Sewall’s Point Road, a Ghost Controls dual-swing operator had gone dead after a storm. Our tech traced it to corroded battery leads and a salt-fouled receiver board, not a failed arm. We cleaned and resealed the terminals, replaced the receiver, reset the limits on the heavy iron leaves, and the gate was cycling cleanly off its solar backup by the end of the visit. That’s the typical Sewall’s Point repair, not the exception.
Ghost Controls Models & Products We Service in Sewall’s Point
We service the full Ghost Controls residential lineup: the Standard Duty single-swing opener on AC power, the Heavy Duty dual-swing opener for wide estate gates, solar-charged kits with battery backup, and tube/slide-style operator packages. On Sewall’s Point, the dual-swing and solar kits dominate because so many driveways have custom iron gates too heavy for a single-arm setup and too far from a power source for AC-only operation. We keep common Ghost Controls boards, receivers, and batteries stocked locally for fast turnaround, and we source genuine OEM arms where the originals are still serviceable.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Sewall’s Point
Ghost Controls gate repair in Sewall’s Point typically runs between $180 and $340 for common board, receiver, or limit-switch work. Solar battery replacement usually lands between $120 and $260 depending on the battery type and whether the charging system needs a separate fix. Full operator replacement on a heavy dual-swing estate gate runs higher, and we only recommend it when corrosion has made repair a bad investment. Every price is quoted and agreed before any work starts. A free estimate includes a full diagnostic, a written recommendation, and no obligation. Call (855) 360-5306 for an exact quote on your property, or see Ghost Controls in Jensen Beach if you’re just north of the inlet.
Serving Sewall’s Point, FL — Our Local Coverage Area
We’re based in the Sewall’s Point area and know this community well, including nearby Hutchinson Island South. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Sewall’s Point
Stalling mid-travel on a waterfront lot is almost always a sagging battery, usually from salt corroding the battery leads or a solar panel undercharging because shade blocks your panel. On Sewall’s Point, the marine air accelerates terminal corrosion, so the fix is typically cleaning and resealing the terminals, testing the battery under load, and resetting limits. Call (855) 360-5306 and we’ll diagnose it the same visit.
Your keypad receiver board has likely failed or lost its programming, and on Sewall’s Point the salt air is the prime suspect. The gate still works on remote because that receiver is often in a different, better-sealed housing. We replace the keypad board or the entire keypad if the housing is corroded, then reprogram it to your existing remotes.
Yes, and on this peninsula we usually do. Most Ghost Controls operators here are older units on built-out estate lots, and the failure is typically corrosion at the terminals or receiver, not the gearing or housing. We repair first, replace only when the housing and gearing are corroded past saving.
Yes, measurably. Operators on Sewall’s Point waterfront lots fail from corrosion-driven board and terminal issues far more often than from mechanical wear, because onshore salt-laden air off the Indian River and Atlantic sits on the electronics constantly. Inland Martin County units wear out mechanically; here they corrode. That’s why we reseal terminals and recommend marine-grade dielectric grease on every service call.
Yes, we realign gate leaves, reset limit switches, and re-level arm-mount hardware regularly after hurricane season. Storm wind and surge shift gates on their hinges and drift the limit settings, and safety-reverse faults follow. Call (855) 360-5306 and we’ll get your gate closing square again.
Service Areas Near Sewall’s Point
We also provide Ghost Controls service in North River Shores, just across the bridge, and in Verona Walk to the north, where the same salt challenges apply, if a bit less aggressively. We cover the surrounding Martin County area for Ghost Controls owners who want a brand-specific diagnosis.
Book Your Ghost Controls Service in Sewall’s Point Today
If your Ghost Controls gate is dead, stalling, or ignoring your keypad, call (855) 360-5306. We’ll diagnose the actual failure, explain your options, and quote the price before any work starts. Same-day service is available for emergency repairs.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Sewall’s Point, FL.