Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Plantation, FL | Archway Gate Repair
If your Ghost Controls gate operator in Plantation has stopped responding, won’t hold a charge, or cycles halfway and quits, we can usually diagnose it on the first visit. We’re an independent Plantation Gate Repair company working on Ghost Controls solar and low-voltage swing operators throughout Plantation every week. The difference here is simple: we know the equipment, and we know what Plantation’s climate and HOA requirements do to it. Call (855) 360-5306 for a free estimate, and we’ll tell you honestly whether you need a board, a battery, or something simpler.
Why Plantation Residents Choose Us for Ghost Controls Service
We work on the brand already on your property. Ghost Controls operators have their own personality: light-duty swing arms, solar-charge logic, and control boards that do not forgive moisture. Nelson Arrieta, our owner, has been diagnosing gate opener failures across South Florida for over two decades, and he’ll tell you straight: “If I’ve seen the brand, I’ve already seen the problem.” That’s not a slogan. It’s what happens when you’ve opened enough Ghost Controls control boxes in Plantation to know exactly where the corrosion starts.
We’re not a handyman service that occasionally touches gates. Electric gate repair is what we do: motors, control boards, safety loops, keypads, hinges, wiring. We carry Ghost Controls-compatible boards, batteries, and receivers that meet spec, so a repair in Plantation doesn’t mean waiting a week on a part. And because we’re a Ghost Controls sales & service specialist rather than a manufacturer rep, our only loyalty is to the equipment working correctly on your property.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Plantation
Here’s what we see repeatedly on Ghost Controls systems in Plantation, and why the local environment makes each one worse:
- Battery and solar-charge failure. Plantation’s summer humidity and near-daily afternoon rain cut into solar harvest, and the battery never fully tops off. The gate dies mid-cycle, or the remote stops being accepted even though the panel looks fine. We test the charge circuit, not just the battery, because swapping one without checking the other sends you back to the same failure in six weeks.
- Control board moisture intrusion. Salt-laden air and storm-season dampness push into the control box. Terminals corrode, and the gate starts doing things nobody asked for: reversing for no reason, opening at 3 a.m., ignoring the remote entirely. A soaked board usually needs replacement, and we seal the housing properly so the next one survives longer.
- Arm and actuator strain on older gates. Ghost Controls swing arms are light-duty by design. On a Plantation home where the gate has sagged or the hinges froze up back in the 1990s, the arm overworks and trips out. Sometimes the fix is the hinge and post, not the operator. We tell you which one it is before ordering anything.
- Keypad and receiver corrosion. Rubber-button keypads at Plantation driveway entries fail after a few storm seasons. Buttons split, salt crusts the contacts, and remotes stop pairing. We replace them with compatible units and check the receiver’s mounting point, because a receiver bolted where sprinkler overspray hits it will corrode again regardless of brand.
- Storm-related electrical damage. Post-hurricane power surges and outages leave Ghost Controls gates stranded open or locked. We see this after every named storm in Plantation. The fix is usually the board, occasionally the actuator, and we test the full system before calling it done.
Ghost Controls Service in Plantation: What Local Conditions Mean for Your Equipment
Here’s something a generic Ghost Controls page won’t tell you: most Ghost Controls operators we service in Plantation sit on gates inside mandatory-HOA walled communities. That means a repair isn’t finished just because the gate cycles. It’s finished when the homeowner has documentation the architectural review board will accept. We’ve learned this through years of callbacks where the gate worked fine but the HOA wanted proof the repair met community standards. So our service tickets note the model, the parts replaced, and the repair scope in a form owners can hand directly to their association. It’s a small thing that saves a Plantation homeowner a second visit and an awkward board meeting.
This matters more in Plantation than in neighboring cities like Ghost Controls in Broadview Park because of the housing stock. Large portions of the city were built between the 1960s and 1990s, with walled, gate-controlled communities installed in the 1980s and 90s. That original access-control hardware has now been through thirty-plus South Florida summers: humidity, salt, hurricane winds, power flickers. The Ghost Controls operator on the gate is often the newest component in the system. The posts, hinges, and conduit are the real veterans. We diagnose accordingly.
Ghost Controls Models & Products We Service in Plantation
We service the full Ghost Controls residential line across Plantation, including the Heavy-Duty Single Swing AXS-series solar and AC swing operators, Dual Swing gate opener kits for two-arm driveways, and the Architectural Series swing operators. The accessory ecosystem too: keypads, remote receivers, safety edges, and tube-gate hardware. When we need a part, we use Ghost Controls-compatible components of known quality where they meet spec. If a light-duty Ghost Controls arm is the wrong operator for a heavy or sagging gate, we say so plainly. The honest fix is sometimes a hinge and post repair or a motor swap, and we’d rather tell you that before you spend on a fourth board.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Plantation
Service calls in Plantation typically start with a diagnostic visit, and our estimates are free. What you’ll pay depends on what we find, but here’s the range we quote most often:
- Diagnostic service call: $65 – $125, applied toward the repair if you approve the work.
- Battery replacement (solar systems): $95 – $220 including the battery.
- Control board replacement: $180 – $350 depending on model and board availability.
- Keypad or receiver replacement: $85 – $180 installed.
- Hinge and post realignment: $250 – $600, depending on gate weight and post condition.
We quote the price and agree on the scope before any work starts, so the invoice matches what you approved. Call (855) 360-5306 for an exact number on your Ghost Controls system. Estimates are free, and we’ll tell you if the gate actually needs a repair or just a battery you can swap yourself.
Serving Plantation, FL — Our Local Coverage Area
We’re based in the Plantation area and know this community well, and we also handle Ghost Controls repair in Fort Lauderdale. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Plantation
After a South Florida storm, it’s usually the battery that drained while the solar panel was covered and the system cycled on backup power until it quit, but a power surge can take the board out too. We test the charge circuit, the battery voltage under load, and the board’s behavior before replacing anything. Call (855) 360-5306 and we’ll check it on site, so you don’t pay for a board when the battery was the whole problem.
Yes, if the repair is documented properly. Our service tickets include the model, parts replaced, and repair scope in a form you can hand to your association’s review board. In Plantation, where mandatory HOAs govern nearly every gated community, that paperwork is part of the job. We don’t consider a repair complete until the gate cycles and the documentation exists.
Halfway reversals on a Ghost Controls swing operator usually come from the safety edge sending a false signal, a control board that’s taken moisture, or the arm fighting a gate that’s dragging on a shifted post. We’ve seen all three in Plantation’s older subdivisions and nearby Ghost Controls service in Broward Estates. The fix depends on which one it is, and testing tells us in about twenty minutes on site.
Sometimes, but not always. Ghost Controls swing arms are light-duty by design. If the gate is solid steel, sagging, or the hinges seized decades ago, the operator will trip out repeatedly no matter how many boards you replace. We’ll measure the gate’s weight and swing and tell you whether the right fix is hinge and post work or a stronger operator. Repair first, replace only when necessary.
Yes. The keypads, remote receivers, and safety edges that shipped with Ghost Controls kits are part of the system, and we stock compatible replacements or repair the existing units when corrosion hasn’t gone too far. In Plantation’s salt air, keypad buttons and receiver contacts are some of the first things to fail. Call (855) 360-5306 and we’ll tell you whether yours can be cleaned or needs replacement.
Service Areas Near Plantation
We provide Ghost Controls gate repair throughout Plantation and the surrounding communities. If you’re in Hialeah Gardens, Hollywood, Cooper City, or Bal Harbour, our techs cover those areas too. For more detail on our coverage, see our Plantation service area page, or the dedicated pages for Ghost Controls service in Washington Park and Ghost Controls service in Lauderhill.
Book Your Ghost Controls Service in Plantation Today
If your Ghost Controls gate is down or acting up, call (855) 360-5306 now. We’ll schedule a time that works, show up with the right parts for your model, and give you a written price before we touch a board. From the motor to the hinge, diagnosed not guessed.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Plantation and South Florida’s gated communities for over two decades.