Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in McGregor, FL | Archway Gate Repair
We provide independent Ghost Controls gate repair across McGregor, FL (33919). Our crews work on Ghost Controls swing and slide operators every week on Caloosahatchee-side lots, and the one thing that separates our service here is simple: before we blame the control board, we check the column, the hinges, and the battery. Salt air does things to a Ghost Controls system in McGregor that won’t show up in the manual. Call (855) 360-5306 for a free estimate.
Why McGregor Residents Choose Us for Ghost Controls Service
We work on the brand already on your property. Ghost Controls solar and low-voltage operators show up on a lot of McGregor driveways, from the older ranch homes along McGregor Boulevard to the custom canal-front builds sitting behind masonry columns. We’re factory-familiar with the Ghost Controls AXS1, AXTB, TDS2, and ARS/ASL lines, which means we arrive knowing the failure points — the same expertise we bring to Ghost Controls repair in Cypress Lake. Diagnosed, not guessed. Nelson Arrieta, our owner, started his gate career working through electrical systems and industrial mechanics at Miami Dade College’s North Campus, and he’s spent the years since working on every operator type South Florida throws at a gate. He trains our techs the same way: find the cause, fix the cause, skip the parts-sales pitch.
We’re a Ghost Controls sales & service specialist in the sense that we service this equipment deeply, but we are an independent gate repair company. We are not authorized, sponsored, or endorsed by Ghost Controls. That independence is worth something on a McGregor job: we’re free to tell you when an OEM part is the right call and when a marine-grade stainless replacement will outlast it.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in McGregor
- Salt-air corrosion on the control box and battery leads. Operators on canal-front lots in 33919 start pitting on the terminal block and green up on the leads within a few seasons, well before the motor itself wears. We clean, reseal, and swap in marine-grade fasteners where the stock hardware won’t survive.
- Solar charge-controller and battery failure from shaded panels. McGregor’s tree canopy is part of the charm, but it’s rough on a Ghost Controls solar setup. A panel that only catches a few hours of sun leaves the battery depleted, so the gate dies on a cloudy stretch. That’s a charging problem, not a board fault – and it’s one of the most common misdiagnoses we correct.
- Limit and photo-eye faults after a column shifts. Post-storm column movement is a McGregor constant. A swing gate arm bolted to a column that’s drifted a few degrees will throw limit faults and fail to close reliably. We re-plumb the anchor, re-teach the limits, and the faults clear.
- Hinge and pivot-arm seizure. The salt air off the Caloosahatchee welds hinge pins and bushings together faster than you’d think. The operator stalls, trips on obstruction sensing, and the homeowner assumes the motor’s shot. It’s usually a hinge, and we fix it with stainless hardware.
- Dead battery backup after storm season. A Ghost Controls battery backup that hasn’t been checked in two or three seasons will fail right when the power flickers in a tropical storm. We test the batteries, clean the terminals, and replace what won’t hold a charge.
Ghost Controls Service in McGregor: What Local Conditions Mean for Your Equipment
McGregor is a small, affluent waterfront community on the Caloosahatchee in unincorporated Lee County. Gates here are as much a privacy and status feature of canal-front and gated-enclave properties as a security device, which means we’re servicing high-end driveway and estate gates, not the utilitarian yard gates you’d see inland. And nearly every automated gate in McGregor hangs on a masonry column out at the drive rather than a freestanding post. That column is the difference between a simple operator swap and a realignment job. On a Ghost Controls call here, our first move is checking column plumb and salt-pitted anchor plates, because a column that’s drifted even a few degrees changes the swing arc, loads the arm, and produces symptoms that look exactly like a failing motor or board. We’ve handled similar Ghost Controls repair in Whiskey Creek where salt-drifted columns masked as operator failures. The salt air accelerates the rest: hinges pit, fasteners crust, terminal blocks corrode. A Gate operator that would run fine for a decade inland may need hinge hardware and column work within three or four seasons on a McGregor canal lot. Knowing that difference is what lets us fix the actual problem instead of selling a new operator.
Ghost Controls Models & Products We Service in McGregor
We service the full Ghost Controls residential lineup: the Heavy-Duty Single Swing kits (AXS1 and AXTB), the Dual Swing Gate Opener (TDS2), the Slide Gate Opener series (ARS/ASL), and the accessory kits including the AXDP solar panel and ABB battery backup. Repairs get OEM Ghost Controls boards, arms, charge controllers, and harnesses where they’re the right fit. Where the stock hardware won’t survive the Caloosahatchee salt, we use marine-grade stainless fasteners and sealed enclosures instead. We keep common Ghost Controls parts on the truck for the drive out to McGregor and over to Ghost Controls repair in Villas, which means fewer second trips when a capacitor or limit switch has failed.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in McGregor
Here’s the honest version. Ghost Controls repair pricing in McGregor breaks down by the work involved, not by some magic multiplier for the neighborhood.
- Diagnostic service call: $75-$125, applied toward the repair if we do the work.
- Limit switch, photo-eye, or battery replacement: $150-$300 including parts and labor.
- Control board replacement (OEM Ghost Controls board): $250-$500 depending on model.
- Hinge and pivot-arm hardware replacement in stainless: $200-$450 per leaf.
- Column re-plumb and gate realignment: $300-$700 depending on column size and access.
- Full operator replacement with new Ghost Controls unit: $1,200-$2,500 installed.
Every one of those numbers gets quoted and agreed before we start. No surprises, no “while we’re out here” upsells. You’ll get a free estimate that covers the diagnosis, the parts, and the labor. If a corroded unit is past saving, we’ll say that plainly – we don’t get paid to be wrong about whether your operator has years left or weeks. Call (855) 360-5306 and we’ll give you a real number, not a range you’ll have to argue about later.
Serving McGregor, FL — Our Local Coverage Area
We’re based in the McGregor area and know this community well, and we also handle Ghost Controls in Pine Manor. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in McGregor
That’s almost always a solar charging issue, not a dying motor. The battery runs low overnight, catches sun in the morning, works briefly, then drains again as the charge controller can’t keep up. Shaded panels on tree-canopied McGregor lots are the usual culprit. We check the panel output, charge controller, and battery health to find exactly which one is starving the system. Call (855) 360-5306 for a diagnostic.
Probably not. A string of overcast days with a failing battery will kill even a healthy Ghost Controls board’s power supply. We see this all the time on McGregor lots where the panel sits in shade for half the afternoon. The battery is the first suspect, then the charge controller. The board is usually third at best.
Not usually. What a tropical system does to a Ghost Controls slide gate is knock the gate off its track or move a column, and the operator then looks dead because it’s binding. We realign the track, re-plumb the column if it moved, and re-teach the limits. A full operator replacement only becomes the answer if the motor itself has been running bound long enough to burn out.
Yes, and this is one of the most common jobs we do in McGregor. The masonry columns on mid-century and custom canal-front homes here are load-bearing anchors for Ghost Controls swing arms, and when the column shifts or the anchor plate rusts, the arm fights the gate. We re-plumb the column anchor, swap in stainless hardware, and reset the travel limits. Call (855) 360-5306 for a column inspection.
Salt air attacks the terminal connections on a Ghost Controls battery backup first – the lead corrodes, resistance builds, and the system won’t hold a charge even if the battery is fine. A terminal cleaning and reseal often brings a “dead” backup back to life. In McGregor, we recommend checking those terminals twice a year. Call (855) 360-5306 to schedule a corrosion inspection.
Service Areas Near McGregor
Our crews cover McGregor and the surrounding Lee County communities. We also provide Ghost Controls service in North Fort Myers for homeowners across the river, and Ghost Controls service in Florida Ridge for the neighborhoods just beyond the Caloosahatchee corridor. We serve all of our McGregor service area within 33919.
Book Your Ghost Controls Service in McGregor Today
On a canal-front drive in 33919, our crew answered a Ghost Controls dual-swing gate that ran one leaf and stalled the other. The failure was not the board: salt air had seized a hinge pin solid and the column had shifted just enough that the arm was fighting the leaf. We freed and replaced the hinge hardware in stainless, re-plumbed the column anchor, and re-taught the limits. Both leaves have run clean through the wet season since. That’s the kind of fix we do in McGregor. Call (855) 360-5306 for your free estimate.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving McGregor and the surrounding Lee County communities.