Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateDoorKing Gate Repair in Hollywood, FL | Archway Gate Repair
We’re independent DoorKing service in West Park and Hollywood specialists, from the salt-ravaged estates along the Intracoastal to the gated communities west of I-95. DoorKing operators fail differently here than they do ten miles inland, and that’s exactly what we’ve spent years learning. Call (855) 360-5306 when your gate stops mid-cycle, your keypad goes dead, or your opener starts making a sound it shouldn’t. Nelson Arrieta and our crew have serviced hundreds of DoorKing operators across Hollywood, and the diagnosis usually takes less time than the drive over.

Why Hollywood Residents Choose Us for DoorKing Service
Most gate companies can swap a motor. Few can look at a DoorKing 9000 Series slide operator three blocks off A1A and tell you why the control board corroded in two seasons while the same unit in Cooper City runs fine for a decade. That’s the difference. We work on the brand already on your property, and Nelson Arrieta’s two decades of South Florida gate work means we recognize the failure before we open the housing. “If I’ve seen the brand, I’ve already seen the problem.”
We’re also local in a way that matters for Hollywood specifically. This city has two completely different gate worlds: the 1920s Mediterranean homes and 1950s ranches east of the Intracoastal, and the HOA-governed 55+ communities west of I-95. Each one stresses DoorKing equipment differently. We service both, and we know what to expect when we pull up to each one. See our DoorKing sales & service overview to understand the full scope of what we handle.
Styles & brands we work with





Common DoorKing Gate Repair Problems We Solve in Hollywood
- Corroded control boards on 9000 Series slide operators. Near the beach in 33019 and 33020, salt spray works its way into the operator housing and eats at the circuit board, especially on units where the board sits low. We see this constantly. The fix is an OEM replacement board with a corrosion-resistant coating, plus sealing the housing properly so it doesn’t happen again next spring.
- Seized hinge pins and operator arms on swing gates. Galvanized hardware rusts through in as little as two seasons within a half mile of the ocean. A 6000 Series swing operator can be working fine mechanically while the gate leaf itself won’t move because the hinge pins are frozen solid. We free the hinges, replace pins with coastal-grade stainless, and realign the operator arm.
- Limit switch misalignment after storms. Wind-driven rain and post-hurricane gate sag knock 6000 Series limit switches out of sync, which makes the gate stop short or overtravel. In Hollywood, this is a seasonal issue, not a random one. We realign the limits and address the underlying sag so the gate cycles true.
- Humidity intrusion in 1812 keypads and intercoms. Older 1812 units in Hollywood’s year-round humidity absorb moisture through cracked gaskets and sun-baked housings. Keypads work intermittently or keycodes stop registering. Board-level repair or replacement with properly sealed housings fixes it.
- Chain wear and motor strain on slide gates. West of I-95 in communities like Emerald Hills and the 55+ developments along Stirling Road, slide gates cycle constantly all day. That continuous use stretches chains and wears rollers, which puts extra load on the motor. We catch the wear before it burns out your operator.
DoorKing Service in Hollywood: What Local Conditions Mean for Your Equipment
Hollywood’s gate repair market splits along an invisible line at the Intracoastal Waterway. East of it, in the 33019 and 33020 ZIPs around the barrier island and downtown, salt spray from the Atlantic corrodes DoorKing operator circuit boards and seizes hinge pins in as little as two seasons. That’s a real number we’ve observed on dozens of units between Hollywood Beach and North Beach, similar to what we see with Miramar DoorKing service calls. The same model operator in the drier, inland neighborhoods of 33024 and 33026 west of I-95 rarely shows that failure rate. One field call stands out: a 1950s ranch home near downtown Hollywood, 33020, had a DoorKing 6000 swing operator that stopped mid-cycle after a storm. The limit switch had corroded solid from salt air, and the hinge pins on the gate leaf were seized. We freed the hinges, replaced the limit switch with an OEM part, realigned the arm, and the gate cycled smoothly. The homeowner now schedules annual corrosion prevention. If you live east of US-1, that annual check is the cheapest insurance you can buy for your opener.
Our coverage across the Hollywood service area includes every neighborhood from the beach to the Broward County line, and we carry parts that match what your specific microclimate demands.
DoorKing Models & Products We Service in Hollywood
We service the full DoorKing lineup you’re likely to find on a Hollywood property: the 9000 Series slide gate operators common at gated communities and commercial lots, the 6000 Series swing operators on older estates and mid-century homes, the 1601 and 1602 barrier gate operators at parking entries, and the 1812 vehicular gate operators you’ll still see on plenty of east-side driveways. For parts, we use OEM DoorKing control boards, limit switches, and motor assemblies when available because compatibility matters. But we stock aftermarket hinges, rollers, and batteries that meet or exceed OEM specs for coastal conditions, because a galvanized hinge from the factory isn’t built for salt air. Our truck carries what Hollywood calls require, so we usually complete repairs in one visit.
See the difference
Before
After
Before
After
Before
AfterDoorKing Service Pricing in Hollywood
Service call and diagnostic work for DoorKing equipment in Hollywood typically runs $75 to $150, which covers the trip, the diagnosis, and a written estimate. Common repairs like limit switch replacement or hinge pin freeing fall in the $180 to $340 range depending on parts and the extent of corrosion. Control board replacements on 9000 Series units run higher, typically $350 to $650, because the OEM boards themselves cost more and coastal replacements need sealing work. A full operator replacement lands between $1,200 and $3,200 depending on the model and what’s salvageable from the old unit. Every price is quoted and agreed upon before we start, and estimates are free. Call (855) 360-5306 for an exact quote.
Serving Hollywood, FL — Our Local Coverage Area
We’re based in the Hollywood area and know this community well, just as we know DoorKing repair in Carver Ranches. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – DoorKing Gate Repair in Hollywood
Salt spray from the Atlantic is the culprit. In the 33019 and 33020 ZIPs, airborne salt penetrates operator housings and corrodes circuit boards, limit switches, and metal hinge components at a rate you won’t see inland. Annual corrosion prevention service makes a measurable difference. Call (855) 360-5306 to schedule an inspection.
Yes, and we see this frequently in Hollywood. Post-storm failures are usually limit switch misalignment, chain damage, or water intrusion in the control board. We diagnose the specific failure, repair what’s repairable, and recommend replacement only when the housing or board is corroded beyond economical repair. Estimates are free.
Almost always, yes. Hollywood’s year-round humidity seeps into older 1812 keypads and intercom housings through cracked gaskets and sun-baked plastic. Moisture on the circuit board causes intermittent failures. Sealing or replacing the board and housing fixes it permanently.
For control boards, limit switches, and motor assemblies, we use OEM DoorKing parts because compatibility matters and guesswork with electronics gets expensive. For hinges, rollers, and batteries, we stock aftermarket parts that exceed OEM specs for coastal conditions. You get the right part for the environment, not just the brand name.
East of US-1, annually. Salt air corrosion needs a yearly inspection and cleaning to catch hinge seizure and board corrosion before they strand you. West of I-95, every one to two years is usually sufficient unless your gate cycles hundreds of times daily. Call (855) 360-5306 for a free estimate on preventative service.
Service Areas Near Hollywood
We also provide DoorKing repair in Hialeah Gardens, Cooper City, and Bal Harbour. For beachside communities just south of Hollywood, see our DoorKing service in Sunny Isles Beach and our DoorKing service in Bay Harbor Islands.
Book Your DoorKing Service in Hollywood Today
Need DoorKing in Andover or Hollywood operator fixed? Call (855) 360-5306. We offer free estimates, same-day service for repair calls, and a repair-first approach that means you pay for the fix, not a sales pitch. Nelson Arrieta and our crew are ready when your gate isn’t.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Hollywood and South Florida with gate repair and installation expertise.