Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lake Worth, FL
Gate installation in Lake Worth comes down to one thing more than any other: the age and layout of the property you’re working with. A 1920s bungalow on a narrow downtown lot needs a completely different approach than a 1990s villa with a wide driveway in the western ZIPs. At Archway Gate Repair, we handle both, and everything in between. We’re a gate-only specialist, which means when you call (855) 360-5306, you’re talking to someone who installs and repairs gates every single day, not a general contractor who fits them in between fence jobs.
Why Lake Worth Homes Are Different
Lake Worth’s gate landscape splits into two very distinct worlds. Downtown and the Osceola corridor, especially in 33460, still carry the footprint of the 1920s Florida land boom: bungalows and Mediterranean-revival cottages on deep, narrow lots. These homes were built before cars shaped the streetscape, so the gates here are almost always side-yard pedestrian gates set into stucco-and-CBS walls, often squeezed between a mature oak and the property line. Clearance is measured in inches. A gate that worked fine for decades can start dragging overnight when the summer humidity swells the wood or shifts a hinge post.
Move west into 33461, 33462, and 33463 and the picture changes to newer tract homes and villas with wider driveway gates, often aluminum or ornamental iron, sometimes paired with pool enclosures and automatic openers. These gates face a different enemy: salt air from the Atlantic, which works its way into hinges, rollers, and motor housings year-round, and hurricane-season wind loads that can twist a frame out of plumb in a single afternoon storm. We see the full range across Lake Worth, and we plan for the specific failure patterns of each area.
Styles & brands we work with
Our Main Lake Worth Services
Most calls we get from Lake Worth homeowners fall into one of two buckets: a gate that won’t open or close properly, and an electric gate that has stopped responding entirely. Both have dedicated pages for this area.
Gate Repair in Lake Worth
Mechanical gate repair in Lake Worth means dealing with rust on ornamental iron near the coast, swollen wood gates in the historic district, and hinge hardware that has finally given out after decades of salt and humidity. We diagnose the actual failure, whether it’s a bent frame, a snapped hinge, or a gate pulled out of plumb against a 90-year-old wall, and we fix it without pushing a replacement unless the steel itself is gone. This is repair-first work on the gate already on your property. Read more about Gate Repair in Lake Worth.
Electric Gate Repair in Lake Worth
When an automated gate stops mid-cycle, won’t respond to the remote, or reverses for no reason, the problem is usually in the control board, the motor, a safety sensor, or the wiring run. We work on LiftMaster, FAAC, BFT, and Mighty Mule systems regularly across Lake Worth, and we know each brand’s common failure points before we arrive. That means faster diagnosis and a smaller parts bill than a generalist who has to learn your system on site. Get your Electric Gate Repair in Lake Worth back online.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Lake Worth
Gate installation in Lake Worth is really about matching the gate to the property’s age, the climate, and how you actually use the space. A new automatic driveway gate on a western-suburb home in 33463 solves a different problem than a hand-built wooden pedestrian gate fitted into a stucco wall in 33460, where every inch of swing clearance matters. We measure, order, and build for the specific conditions of your lot, and we quote the full job before any work starts. That includes the gate itself, the hardware, any opener or automation, and the labor. If you’re replacing rather than repairing, or starting from scratch, see our full Gate Installation service.
Automatic Gate Installation
Signs you need it
You’re still getting out of the car in the rain to open and close a manual driveway gate, or you’ve just bought a home with an old opener that’s beyond economical repair.
What it costs in Lake Worth
Automatic gate installation in Lake Worth typically runs $3,500 to $9,000 depending on gate size, opener type, and whether new power wiring or safety loops are needed.
How we do it
We survey the driveway width and swing or slide path, recommend the right operator for the gate’s weight and use pattern, then handle the install, opener mounting, safety sensor setup, and testing.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through at the bottom rail, or you’ve never had a gate and want a defined, secure entry that fits the look of the house.
What it costs in Lake Worth
A new residential driveway gate in Lake Worth typically costs $2,000 to $7,000 installed, with ornamental iron on the higher end and aluminum or steel tube frames falling mid-range.
How we do it
We measure the opening and check grades and hinge-post depth, then build or order the gate to size, set the posts in concrete, hang the gate, and adjust the swing or track until it moves cleanly.
Sliding Gate Installation
Signs you need it
Your driveway slopes toward the house, or you have limited setback space where a swinging gate would hit a car or block the sidewalk as it opens.
What it costs in Lake Worth
Sliding gate installation in Lake Worth typically ranges $4,000 to $10,000, with the track, cantilever hardware, and gate length driving most of the cost.
How we do it
We set the track or cantilever rollers on a level concrete base, hang the gate frame, then fine-tune the roller alignment and end stops so the gate travels smoothly without binding.
What Gate Installation Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Pedestrian gate installation | $500 – $2,500 |
| Driveway gate installation | $2,000 – $7,000 |
| Automatic gate installation | $3,500 – $9,000 |
These ranges reflect what we quote across Lake Worth’s mix of historic downtown lots and newer western subdivisions. The final number depends on the exact materials, the opener if you’re adding automation, and any concrete or post work the site requires. You’ll always get the price in writing and agreed before we order anything.
Does a new automatic gate in Lake Worth need a permit?
Most new driveway gates in Lake Worth require a building permit, especially when concrete footings, new electrical runs, or a sliding track are part of the job. We handle the permit paperwork for you and make sure the installation meets current wind-load and safety-sensor codes.
How long does a gate installation take in Lake Worth?
Most standard driveway gate installations in Lake Worth are completed in one to three days on site, depending on whether we’re pouring new concrete footings or running new electrical. Custom-built ornamental iron or wood gates add lead time for fabrication, typically one to three weeks. Call (855) 360-5306 and we’ll give you a real timeline for your specific job.
Brands We Service in Lake Worth
We work on the brand already on your property. Across Lake Worth, that means a lot of LiftMaster, FAAC, and Mighty Mule openers on residential gates, plus Elite and BFT on commercial systems. Our familiarity with each brand’s control boards, motors, and sensor layouts means we diagnose faster and stock the common replacement parts locally. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lake Worth, FL
| Service | Typical range in Lake Worth |
|---|---|
| Gate repair (hinge/hardware) | $150 – $450 |
| Gate repair (frame/structural) | $400 – $1,200 |
| Electric gate repair (control board) | $250 – $650 |
| Electric gate repair (motor replacement) | $450 – $1,500 |
| Sensor/safety loop repair | $200 – $600 |
| Pedestrian gate installation | $500 – $2,500 |
| Driveway gate installation | $2,000 – $7,000 |
| Automatic gate installation | $3,500 – $9,000 |
| Sliding gate installation | $4,000 – $10,000 |
What pushes a Lake Worth gate job toward the top of these ranges is salt corrosion that has spread beyond one component, a post that needs to be re-set in concrete, or an opener that has to be fully rewired rather than re-programmed. Every quote is given before work begins, and it’s the number you pay.
Neighborhoods We Serve in Lake Worth
We work across all of Lake Worth, from the historic downtown blocks to the subdivisions along the western edge of town. Response time for repair calls is typically same-day or next morning across the area.
- Downtown Lake Worth (33460)
- Osceola corridor
- College Park
- Royal Poinciana
- Western Lake Worth (33462, 33463)
Service Area – Cities Near Lake Worth
Archway Gate Repair also covers the communities directly around Lake Worth, including Greenacres City, FL, Lake Worth Corridor, FL, Lake Clarke Shores, FL, and Palm Springs, FL. If you’re in one of these areas and your gate has stopped working, call (855) 360-5306 and we’ll let you know our next available response time.
Serving Lake Worth, FL — Our Local Coverage Area
We’re based in the Lake Worth area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lake Worth
Most repair calls in Lake Worth are answered same-day or next morning, depending on where you are and what’s already on the schedule. Emergency repairs for gates stuck open or failed closed take priority. Call (855) 360-5306 and we’ll give you a straight answer on timing.
If you’re in a Lake Worth HOA community, especially in the western subdivisions, you’ll likely need architectural review before a new gate goes in. We can provide the specs, materials list, and drawings your HOA wants, and we’ll work with your approval timeline rather than against it.
Yes. We work on single-family driveway gates, historic downtown pedestrian gates, and commercial access-control systems across Lake Worth. The same brand-specific knowledge applies whether it’s a Mighty Mule on a villa driveway or a DoorKing at a small commercial property.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Worth Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ernesto Flores"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Roger Ziegler"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Carter