Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Bokeelia
Electric gate repair in Bokeelia typically runs $180 – $340 for most motor, hinge, and control board fixes, and we can usually diagnose the issue on the first visit. That matters here because Bokeelia isn’t a quick trip for most gate companies. We know the island, we know the salt, and we know what fails first. If your gate is stuck, dragging, or refusing to close, call us at (855) 360-5306 and we’ll get someone out to Pine Island as fast as the Causeway and Stringfellow Road allow.
Most of our Bokeelia calls fall into two buckets: an electric gate that quit after a storm, or a gate that’s been groaning and binding for months and finally gave out. Both are fixable. We start with the operator and the post footing, not with a replacement quote. That’s the difference between a gate specialist and a general handyman with a truck.
Why Archway Gate Repair Is Bokeelia’s Preferred Electric Gate Repair Company
Bokeelia properties sit at the northern tip of Pine Island, surrounded by Charlotte Harbor and Pine Island Sound. The salt air off the water eats gate hardware. The sandy, saturated ground behind canals shifts post footings. And the long shell drives that lead to boat ramps leave gates fully exposed to Gulf wind. A gate tech who only works inland subdivisions doesn’t see these problems. We do, and we’ve fixed them on nearly every stretch of the island.
Nelson Arrieta built Electric Gate Repair around one idea: diagnose the actual failure, explain it plainly, and fix it correctly the first time. Our team knows LiftMaster, FAAC, BFT, and Linear systems well enough to identify the failure point before we even unbolt the cover. Bokeelia customers call us because we speak in specifics, not guesses.
We work on the brand already on your property. We don’t push a full replacement when a control board, safety sensor, or hinge rebuild gets the gate back online. Repair first, replace only when necessary. And every price is quoted and agreed before any work starts, so you’ll never get an invoice bigger than the number you approved.
Styles & brands we work with





Electric Gate Motor in Bokeelia
An Electric Gate Motor in Bokeelia spends its entire life fighting salt spray, humidity, and wind load on wide driveway panels. When it stops working, the cause is usually one of three things: a capacitor or control board that failed after a power flicker, an operator that’s been overamping because the gate itself is binding, or a motor whose mounts and internals have corroded past function. We diagnose the exact failure before recommending anything.
Motor repair in Bokeelia typically runs $220 – $380 depending on whether it’s a board swap, a capacitor, or a full motor replacement in an existing operator. We carry common parts for LiftMaster, FAAC, BFT, and Linear systems, which means faster turnaround when you’re stuck with a gate that won’t open.
Motor Overamping from Salt-Bound Gate Hardware
On Pine Island, a motor rarely fails in isolation. Usually the gate itself starts binding because salt has corroded the hinges or the rack, and the motor has been pulling harder and harder for months. We fix the mechanical binding first, then test the motor’s amp draw. That sequence prevents the new motor from burning out the same way the old one did.
Storm-Surge and Power-Surge Motor Damage
Summer thunderstorms on Bokeelia bring two threats: lightning-induced surges that kill control boards, and storm surge that can soak low-mounted operators on canal-side lots. If your gate quit right after a storm, we check the board, the capacitor, and the wiring connections between the motor and the panel before quoting anything.
Gate Access Control in Bokeelia
Gate Access Control on Bokeelia covers everything that tells your gate to open and close: keypads, remote controls, intercom systems, loop detectors, and safety sensors. These components sit outdoors year-round in salt air and direct sun, so they fail differently here than they do inland. Keypad buttons wear and corrode. Photocell lenses haze over from salt film. Loop detectors trip on nothing after heavy rain saturates the ground around the drive.
Access control repair in Bokeelia usually runs $120 – $260 for keypad, remote, and safety sensor work. That includes diagnosing whether the problem is the device, the wiring run, or the control board at the other end.
Safety Sensors and Salt Film
UL 325 entrapment protection is a legal requirement on automated gates, and a salt-hazed photocell lens can cause the gate to reverse or refuse to close. On Bokeelia lots where the gate guards a boat ramp or canal access, a disabled or bypassed safety sensor isn’t just a nuisance. We clean, realign, or replace sensors and confirm the gate reverses under load before we call the job done.
Keypads and Remotes for Water-Access Properties
A keypad mounted on a post at the end of a shell drive takes direct sun and salt spray. Buttons crack, the membrane fails, and the circuit board corrodes. We swap in weather-rated units and, where the wiring from the keypad to the operator has degraded, we rerun it instead of patching it.
Trusted Brands We Service in Bokeelia
We carry diagnostic experience in LiftMaster, FAAC, BFT, and Linear systems, among others. That brand familiarity means we already know how a FAAC board behaves after a surge, or how a LiftMaster operator responds to an overamped swing arm. For Bokeelia customers, that means we often arrive with the right part in the truck instead of ordering it and coming back a week later. When a gate is blocking your only access to a boat or a dock, that turnaround time is the whole job.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Bokeelia Homes
- Post footings that shift after heavy rain. Saturated sandy fill behind canals and bayous heaves and settles, leaving the hinge post tilted and the gate dragging. We reset and brace the footing before touching the operator.
- Salt-corroded hinges and latches. Salt-laden air off Pine Sound eats unprotected steel hardware fast. The gate binds, the motor overamps, and eventually the operator quits. We free, treat, or replace the hardware as the first step.
- Wind load on solid infill panels. Long gravel drives off Stringfellow Road and the island’s interior leave drive gates fully exposed to open Gulf wind. Operators strain, arms bend, and tracks can jump on slide gates.
- Safety photocells blocked or hazed by storm debris. Blown sand, salt film, and debris from hurricane season storms trip or block the sensors, and the gate refuses to close or reverses mid-cycle.
Pricing for Electric Gate Repair in Bokeelia, FL
Here are the straight numbers for typical repair work in Bokeelia. Motor repair runs $220 – $380. Access control fixes (keypads, remotes, safety sensors) run $120 – $260. Hinge, latch, and post correction work runs $150 – $300 depending on whether we’re rebuilding a footing or replacing corroded hardware. Full operator replacement with a new motor and board runs $850 – $1,600 installed, and we only recommend that when the existing unit is beyond repair.
What changes the price in Bokeelia specifically: how much salt damage has accumulated, whether the post footing has shifted, and how far down a shell lane the gate sits. We quote every job before work starts, in writing, and that number doesn’t change unless you approve an add-on we discover mid-repair. Call (855) 360-5306 for a free estimate and we’ll put real numbers on your gate.
We Also Serve Cities Near Bokeelia
Our Electric Gate Repair in Bokeelia service area stretches across Pine Island and back into Lee County. We handle gate work in Pine Island Center, Burnt Store Marina, Saint James City, and Cape Coral. If your gate sits anywhere along the western edge of Lee County, chances are we’ve worked that drive before.
Serving Bokeelia, FL — Our Local Coverage Area
We’re based in the Bokeelia area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Bokeelia
Every operator has a manual-release mechanism, usually a pull handle or keyed release on the motor housing, that disengages the gate from the drive so you can swing or slide it by hand. We walk every Bokeelia customer through this procedure after any repair, because hurricane-season outages here are a certainty and you need to get vehicles in or out when the island goes dark. If you can’t find the release or it’s seized from salt, call (855) 360-5306 and we’ll free it up and show you how it works.
When the ground around a Bokeelia canal or bayou saturates after heavy rain, the sandy fill around the hinge post loses bearing strength and the post can shift or heave. The gate then drags or binds, and the motor sounds like it’s working but is actually straining against a tilted panel. We fix the footing first, not the motor, because a new motor on a shifted post will fail the same way. Call us for a footing and alignment check before the operator burns out.
Yes, and it’s legally required. UL 325 governs automatic gate safety: your gate must reverse when it hits an obstruction and the photocells must be functioning. On a boat-access gate where kids, dogs, and boat trailers pass through daily, a bypassed safety sensor is genuinely dangerous. We test entrapment protection on every repair visit and will not leave a gate running without its sensors working.
Most salt-corroded hardware on Bokeelia gates is repairable. Hinges can be freed and treated or replaced, latches swapped, rack and pinion cleaned or changed out, and operator mounts rebuilt. We only recommend replacing a gate when the steel itself has rusted through and welding would be structurally pointless. That call gets made honestly, with numbers, and only after we’ve shown you what’s wrong.
Solar openers work on Pine Island if the panel is sized for the shade, the battery is deep-cycle and vented, and the mounts are stainless or coated. The bigger issue on an exposed Bokeelia lot is wind or salt overpowering the operator itself. A solid infill gate in open wind needs a heavier-duty operator than the same gate would in a sheltered subdivision. We size the whole system for the lot, not just the panel.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Bokeelia and greater Pine Island with dedicated electric gate repair, gate motor repair, and access control service.