Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Bonita Springs
Electric gate repair in Bonita Springs runs $189 to $540 for most service calls, with same-day response available across 34133, 34134, 34135, and 34136. We work on the brand already on your property. If your gate is stuck open, grinding, or dead after a storm, call (855) 360-5306 and we’ll get a tech to you, usually within a few hours.
Bonita Springs is different from other Gulf Coast cities. Gated communities like Pelican Landing, Bonita Bay, and Spanish Wells depend on automated entry gates that have to work without a guardhouse on site. When a control board fries after a lightning strike or salt air eats through a photo-eye sensor, residents can’t get in. That’s the repair we do most often here, and we know the failure patterns of every major brand installed across Lee County.
Archway Gate Repair is led by Nelson Arrieta, a gate specialist, not a general handyman. Our Electric Gate Repair team handles motors, control boards, safety loops, and wiring from the motor to the hinge. We arrive already knowing how your LiftMaster, FAAC, or DoorKing system is wired, which means we diagnose in minutes instead of hours.
Call (855) 360-5306 for a quote. We’ll tell you the price before any wrench turns.
Why Archway Gate Repair Is Bonita Springs’s Preferred Electric Gate Repair Company
We’ve spent years working inside Bonita Springs’s gated communities, and we know what HOA managers and property owners deal with. A gate that won’t close on Pelican Landing’s main entrance is a different job than a driveway gate in a canal-front home off Bonita Beach Road. We know the difference, and we arrive ready for it.
Homeowners and property managers along US-41 and the Imperial River corridor call us because we diagnose, not guess. Nine times out of ten, when a gate fails in Bonita Springs, it’s one of three problems: a fried control board from lightning, a corroded safety sensor from salt air, or a worn gear or arm on an operator that’s 20 to 30 years old. We fix what’s actually broken and don’t push replacements unless the system is truly dead.
Our response time to Bonita Springs is honest. For emergency calls where a community gate is stuck open or a business entrance is blocked, we typically reach most of Bonita Springs within 60 to 90 minutes. For standard repairs, we schedule within 24 to 48 hours. If you’re in Island Walk or Spanish Wells, expect us faster, since we route techs along US-41 and Bonita Beach Road daily.
Nelson Arrieta built Archway Gate Repair around a repair-first philosophy. We’d rather fix a $400 control board than sell you a $4,000 operator you don’t need. Property managers in Bonita Bay and Spanish Wells have told us they keep our number for exactly that reason.
Styles & brands we work with
Gate Access Control in Bonita Springs
Gate access control in Bonita Springs is the system that lets residents in without a guardhouse: the keypad, the call box, the loop detector in the pavement, the antenna on the reader post. When any of it fails, residents are locked out or the gate won’t hold open for deliveries. In Bonita Springs, where many communities are deed-restricted and depend on automated entry, access control failure is an emergency, not an inconvenience.
Keypad and Card Reader Repair
We service the keypads and card readers already installed at Bonita Springs communities. Salt corrosion and direct sun from the subtropical climate break down keypad membranes and reader wiring faster than you’d expect. A typical keypad replacement or repair in Bonita Springs runs $95 to $250 depending on whether we’re replacing just the faceplate or the full reader unit.
Loop Detector and Call Box Restoration
Loop detectors are buried in the asphalt at your gate, and in Bonita Springs they fail two ways: lightning fries the circuit board, or the loop wire breaks as the pavement shifts during the rainy season. We test, locate, and repair or replace the detector. Call-box repairs run $180 to $400, and we’ll match the existing wiring so the HOA doesn’t need to rewire the entire pedestal.
Commercial Gate Operator in Bonita Springs
A commercial gate operator in Bonita Springs is what moves a 600-to-1,200-pound sliding or swing gate at a community entrance, HOA amenity, or commercial property. These operators run constantly, often in direct sun and salt air, and when they fail, you’ve got a security problem. Repair costs in Bonita Springs typically start at $350 and go up depending on the operator brand and what’s failed.
Slide Gate Operator Repair
Slide gates dominate Bonita Springs because tight setbacks on shared driveways don’t leave room for a swing arc. Common failures include worn rack and pinion gears, burned-out motors, and control boards that stop responding. We stock replacement parts for LiftMaster, FAAC, Viking, and DoorKing, so most operator repairs are same-visit jobs.
Operator Replacement Without Full Gate Replacement
Often the post, track, and gate leaf are fine, but the operator is 25 years old and the control board is obsolete. We’ll replace just the operator head and adapt the existing gate hardware. You save thousands compared to a full gate replacement, and downtime is usually under a day. Every operator repair or replacement is quoted and agreed before we start.
Trusted Brands We Service in Bonita Springs
We’re factory-familiar with the brands already installed in Bonita Springs communities: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means when we pull up to a gate in Pelican Landing with a Viking operator or a Mighty Mule drive arm on a canal-front home in east Bonita, we already know the wiring, the common failure points, and the parts. We keep stock of the boards, photocells, and remotes most often needed for these brands at our local service vehicles, so we don’t have to order parts and reschedule.
The result for you is faster repair. No trial-and-error on unfamiliar systems, no guessing at wiring. We’ve fixed enough LiftMaster and FAAC operators along US-41 to know exactly what a storm does to them.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Bonita Springs Homes
- Fried control boards after lightning. Summer storm clusters roll through Bonita Springs and the same communities call within days: entry gates stuck open or dead. Surge damage is the most common culprit, and we install surge protection when we replace boards to prevent repeat failures.
- Corroded photo-eye sensors near the coast. Salt-laden air off the Gulf eats sensor housings and wiring terminals within months, especially in 34134 and homes west of US-41 along Bonita Beach Road. Intermittent “gate won’t close” failures are usually corrosion inside the photocell.
- Worn gears and arms on 20-to-40-year-old operators. The Mediterranean-style communities built in the 1980s and 1990s, Bonita Bay and Spanish Wells among them, are now seeing their original operators fail. Gear wear causes grinding noises and sluggish gate movement, and the fix is usually a gear kit or arm replacement, not a whole new operator.
- Shared driveway and narrow setback slide-gate issues. Many homes in Bonita Springs sit on rights-of-way where the gate has to slide, not swing. Rack and pinion misalignment, track debris from landscaping, and gate wheels that seize are routine repairs. We realign the rack, clean or replace wheels as needed, and confirm the gate cycles cleanly without scraping or jamming.
Pricing for Electric Gate Repair in Bonita Springs, FL
Here’s what electric gate repair actually costs in Bonita Springs, based on the jobs we do most weeks:
- Service call and diagnostic: $89, credited toward the repair if you approve it.
- Keypad or remote reprogramming: $95 to $150.
- Photo-eye sensor replacement: $140 to $240 per sensor.
- Control board replacement: $280 to $540, depending on brand and surge protection included.
- Gate motor or operator repair: $350 to $800, depending on operator type and parts.
- Full operator replacement on a working gate: $1,500 to $3,800 installed.
What shifts the price: your operator brand, whether we’re repairing or replacing the board, and how old the system is. Older FAAC and Viking operators sometimes need adapter kits when original parts are obsolete. You’ll always get the price before we start. Estimates are free, and the quote we give is the price you pay.
Call (855) 360-5306 for an exact number on your gate.
We Also Serve Cities Near Bonita Springs
Our team covers Bonita Springs and the surrounding communities, including Electric Gate Repair in Bonita Springs neighbors like Estero, Island Walk, Naples Park, and Pelican Bay. If your property is just across the city line, we’ll still come out, usually on the same schedule. Call (855) 360-5306 and we’ll confirm coverage for your address.
Serving Bonita Springs, FL — Our Local Coverage Area
We’re based in the Bonita Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Bonita Springs
Yes. We can almost always get a community gate closed manually and make the repair without shutting down traffic, since our techs work on one side of the track or post. For neighborhood entry gates, emergency service is same-day across Bonita Springs, and in many cases, we arrive within 90 minutes. Call (855) 360-5306 with your community name and we’ll dispatch a tech to you.
Salt-laden onshore air off the Gulf of Mexico deposits salt on exposed control boards, terminals, and sensor housings, and the combination of heat and humidity accelerates corrosion. Operators in 34134 and along Bonita Beach Road fail noticeably faster than those a few miles inland near US-41. We use sealed enclosures and corrosion-rated hardware on coastal repairs, and we install surge protection as standard on new boards to reduce repeat failures.
Grinding from a slide gate usually means the rack and pinion gears are worn or misaligned, the gate wheels or rollers are failing, or the track is packed with debris. In Spanish Wells specifically, aging operators on shared driveways and storm debris are routine culprits. Our techs can realign the rack, replace rollers, and confirm the gate cycles smoothly, usually in a single visit. The fix typically starts around $300 and goes up if the operator itself is damaged. Call (855) 360-5306 for an exact quote.
Yes. Lightning damage to keypads, loop detectors, and access-control boards is one of the most common summer repairs we do in Bonita Springs gated communities like Pelican Landing and Bonita Bay. We replace the failed components, test the full entry system, and add surge protection so the next storm doesn’t knock everything out again. Keypad and loop detector repairs together typically run $300 to $650 depending on what was fried, and we’ll give you the price before starting.
In most cases, yes. A sagging swing gate is usually a hinge, weld, or post settlement problem, not a full gate failure. We repair or refabricate hinges, add gate wheels to relieve the post, and realign the closing geometry so the gate closes flush. Unless the gate itself is severely rusted through, replacement is rarely needed. Call (855) 360-5306 for an assessment; we’ll tell you honestly whether repair makes sense.
Written by Nelson Arrieta, Owner at Archway Gate Repair.