Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Clewiston
Electric gate repair in Clewiston usually comes down to two things: a motor that’s either worn out or underpowered for the gate it’s swinging, and hardware that’s been fighting sugar-sand grit and Lake Okeechobee humidity for years. Most repairs we handle in the 33440 area fall between $180 and $640 depending on whether we’re replacing a control board, a solar regulator, or the operator itself. Same-day service is available for most failures. Call (855) 360-5306 and we’ll get a tech heading your way.
We’re not a general handyman service that also happens to look at gates. Archway Gate Repair is a gate-only specialist, and our Electric Gate Repair team works on the brand already on your property. Around Clewiston, that’s often a Viking slide operator on a cane-haul entrance or a BFT swing motor on a ranch gate off CR 835. We know those systems before we arrive, which means diagnosis happens faster and you’re not paying for trial-and-error labor.
Why Archway Gate Repair Is Clewiston’s Preferred Electric Gate Repair Company
Clewiston is different from the coastal gate market. Out here, gates aren’t ornamental. They hold livestock, secure equipment yards, and control access to sugar-cane haul roads that see heavy truck traffic for months at a time. That changes what fails and how it needs to be fixed. A slide gate on a residential street in Fort Myers might need a gear replacement once a decade. A slide gate on a cane-country entrance outside Clewiston needs the rack and pinion cleaned, checked, and re-lubricated after every harvest run just to stop the motor from overloading.
Our techs have been working rural gate systems like this for years. We know the difference between a genuine motor failure and a motor that’s overheating because sugar-sand has packed the roller track and doubled the load. That’s the diagnostic edge Clewiston property owners get when they call a gate specialist instead of a general repair service.
Nelson Arrieta built Archway Gate Repair around the idea that gate work is its own trade. The wiring, the safety loops, the operator logic, the mechanical load path from hinge post to motor. When all of it is on one property and something fails, you want someone who sees the whole picture. That’s us.
Styles & brands we work with





Commercial Gate Operator in Clewiston
Commercial Gate Operator work in Clewiston means servicing the high-cycle, heavy-duty systems on agricultural entrances, equipment yards, and commercial properties, not just residential driveway openers. These operators run open and closed dozens of times a day during cane season, and they’re often paired with wide, heavy slide panels or long swing gates that a lighter residential operator would never survive. When a commercial operator fails, it’s usually one of three things: a heat-worn contactor or capacitor, a stripped gearbox from years of load against a binding track, or a control board that’s been hit by a surge off a lightning strike. Repairs typically run $380 to $1,100 in Clewiston depending on the operator model and what’s failed. The price gets quoted and agreed before any work starts, so there’s no invoice surprise.
Swing Gate Operators on Ranch Land
Ranch entrances around Clewiston often use swing operators on wide pipe-frame gates. The motor itself might be fine while the hinge post has shifted from years of wind load and soil movement. That throws the gate off-line, makes the operator strain, and eventually kills the motor. We check the post alignment and gate sag before we condemn an operator, because a $300 post correction is a better fix than a $900 motor replacement when the motor still has life in it.
Slide Gate Operators for Equipment Yards
Equipment yards and cane-loading areas lean hard on slide operators. The gates are wide, the panels are heavy, and the tracks take abuse from truck tires and tracked-in harvest debris. A binding rack and pinion doesn’t just make noise. It makes the operator pull more amps, overheat, and eventually trip its thermal protection or burn a motor winding. We clear the track, correct any alignment issues, and then verify the operator is pulling within its rated load before we call the job done.
Gate Opener Repair in Clewiston
Gate Opener Repair in Clewiston is often about power, not mechanics. A lot of the ranch and equipment-yard entrances we service sit too far from the nearest practical mains connection, so they run on solar. When a solar gate opener starts cutting out by mid-afternoon, our first suspects in this area are extra load from a binding track, an aging battery that isn’t holding charge, and a charge controller that’s been cooking in the Florida sun. Typical Gate Opener Repair work in Clewiston lands between $190 and $520 depending on whether we’re replacing a battery bank, a regulator, or the opener’s logic board. We diagnose, then quote, then do the work with your approval.
Solar Gate Opener Load Problems
During cane harvest season, sugar-sand gets tracked onto driveways and haul roads. It works into the rack and pinion and the roller hardware. The gate starts binding. The operator draws more current. The solar system’s battery drains faster than the panel can replace it. By mid-afternoon, the opener’s dead. The fix isn’t always a new opener. It’s cleaning the track, reducing the load the opener is fighting, and then checking the charge system. We do all three, because doing two of the three means you call us again in a month.
Opener We’re Seeing Mid-Failure, Not Dead
Some Clewiston customers tell us the gate opens when the sun’s high but won’t budge in the morning or after a few cloudy days. That’s not a dead motor. That’s a solar charge system falling behind the gate’s daily cycle count. We’ll test the panel output, load-test the battery, and check the charge controller for corrosion. If the whole system’s undersized for the gate width, we’ll tell you honestly before we sell you anything. Repair first, replace only when necessary.
Trusted Brands We Service in Clewiston
We work on the brand already on your property. Around Clewiston that’s frequently Viking, Linear, and BFT, with occasional Ghost Controls units on smaller residential gates in town. Our techs know each brand’s specific failure points: Viking slide operators tend to show gear wear under heavy agricultural loads, Linear boards are known for specific capacitor problems, and BFT systems have their own hydraulic quirks on swing applications. That means we arrive with a good idea of what we’re looking for, and we often have the common parts with us on the truck. Faster diagnosis, fewer trips, less down time for a gate that’s supposed to be securing your property.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Clewiston Homes
- Sugar-sand binding on slide gates. Cane harvest season tracks fine sand onto driveways and haul roads, where it packs into the rack and pinion and roller channels. The gate binds, the motor strains, and the opener either trips its thermal protection or slows to a crawl.
- Solar systems that can’t keep up. A gate far from mains power runs on solar, but a binding track and an undersized battery mean the system dies before the day’s done. We see this constantly on ranch entrances in the 33440 zip code.
- Lightning-struck control boards. Clewiston’s summer thunderstorms bring strikes that ride into gate electronics through the power line, the keypad, or even the ground loop. Dead or erratic control boards and keypads are a common repair for us out here.
- Sagging swing posts and rotted footings. Heavy agricultural swing gates put enormous load on a single hinge post. In sandy or wet soil, the post shifts or rots at ground level, and the gate starts dragging. The opener gets blamed, but the post is the actual failure.
Pricing for Electric Gate Repair in Clewiston, FL
What you’ll pay depends on what actually failed. Here’s what Clewiston homeowners and property managers typically see on their invoices.
- Gate motor replacement: $340 – $720
- Control board repair or replacement: $190 – $480
- Solar charge controller or battery replacement: $160 – $390
- Safety sensor or photocell replacement: $130 – $260
- Track cleaning, re-lubrication, and alignment: $120 – $220
Every job gets a written quote before we start. You’ll know the number, you’ll approve the number, and that’s the number you’ll pay. Estimates are free. Call (855) 360-5306 and we’ll get you a firm price.
We Also Serve Cities Near Clewiston
Our Electric Gate Repair in Clewiston coverage extends across the Glades region. We regularly travel to Harlem, South Bay, Belle Glade, and Belle Glade Camp for the same agricultural and rural gate systems we service right here. If your property sits on the cane-country roads between any of these towns, you’re in our service area.
Serving Clewiston, FL — Our Local Coverage Area
We’re based in the Clewiston area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Clewiston
You’re likely dealing with a solar-charge system that isn’t keeping up with the gate’s daily cycle count. A binding track, an aging battery, or an undersized panel all contribute, and during cane harvest the extra grit load makes the problem worse. We’ll load-test the battery, check panel output, and clear the track binding before we recommend anything. Call (855) 360-5306 for a free estimate.
Sugar-sand tracked onto haul-road driveways works into the rack and pinion and roller hardware. Once packed, the gate can’t roll freely and the operator fights the extra load. The fix is thorough track cleaning, re-lubrication, and an alignment check. We recommend having this done after each harvest run to prevent the problem from recurring.
Usually not. A sagging gate is often a hinge-post problem, not a panel problem. The post shifts in soft soil or rots at ground level, and the panel drops. We can correct the post footing and re-align the gate without replacing the panel. We’ll tell you if the panel itself is structurally gone, but we never push replacement when a repair will hold.
Safety sensors on electric gates are required and they protect people and vehicles from a closing gate. They should be tested regularly. If the gate reverses without anything in the path, or fails to reverse when something is, the photocells or the wiring need attention. We test safety sensors on every electric gate repair call in Clewiston and replace them when they’re unreliable.
Lightning-driven power surges during Clewiston’s summer storms are the main culprit for repeated control board and keypad failures. Humidity off Lake Okeechobee accelerates corrosion on connections too. We can add surge suppression at the board and advise you on weather-sealing the enclosure. That’s often the difference between replacing a board every year and getting five or more years out of one.
If your electric gate is down, acting erratically, or just making a sound it never made before, call Archway Gate Repair at (855) 360-5306. We’ll diagnose the problem, quote the repair, and get your gate back online. Free estimates for all electric gate repair work in Clewiston.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Clewiston and the Glades region.