Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Fort Lauderdale
When your automatic gate stops responding, it usually becomes the only thing you think about until it’s fixed. We’re Archway Gate Repair, and we fix electric gates in Fort Lauderdale every day. From the waterfront estates on Las Olas to the gated communities off University Drive, our technicians arrive knowing what they’re looking at because we work on the brand already on your property. Call us at (855) 360-5306 and we’ll send someone who diagnoses, not guesses.
That’s the difference when you call a gate specialist instead of a general handyman. We don’t spend the first hour figuring out how your FAAC or LiftMaster opener is supposed to work. We already know. We’ve seen the failure you’re dealing with on hundreds of properties across Fort Lauderdale and Broward County.
Why Archway Gate Repair Is Fort Lauderdale’s Preferred Electric Gate Repair Company
Fort Lauderdale homeowners and property managers keep our number saved for one reason: we fix the problem the first time. When a BFT slide gate motor seizes up on a canal-front property in Coral Ridge, the problem usually isn’t the motor. It’s the salt-air corrosion that ate the gearbox or the rack and pinion. A generalist spends parts and labor replacing the motor and wonders why it failed again. We see it coming because we know what Fort Lauderdale does to gate hardware.
Our Electric Gate Repair team services every piece of the system. From the motor to the hinge, from the control board to the safety loop, nothing gets referred out. That matters when you have a gate stuck open on a commercial property in 33324 or a keypad that won’t respond on a residential driveway in Victoria Park. One call. One specialist.
We’ve earned the trust of Fort Lauderdale customers by being straight about what needs fixing and what doesn’t. Repair first, replace only when necessary. That philosophy has built a strong local reputation across the city because it saves people real money.
Styles & brands we work with
Gate Opener Repair in Fort Lauderdale
Gate Opener Repair in Fort Lauderdale almost always traces back to two culprits: electrical corrosion from salt-laden humidity and water intrusion from South Florida’s afternoon thunderstorms. Your opener sits inside a metal housing, but that housing breathes. Over two or three years near the Intracoastal, the humid, salty air works its way onto every connection and circuit board inside. Eventually, a storm hits, a GFCI trips, and the gate that worked fine all dry season stops responding entirely.
We open the operator, assess the board and wiring, and tell you honestly what’s salvageable. In a lot of cases it’s a burned capacitor or corroded terminal block, not a full motor failure. A typical gate opener repair in Fort Lauderdale runs $225 to $450 depending on what’s failed. If the board is fried beyond repair, replacement boards for common brands like LiftMaster and FAAC usually run $325 to $680 installed.
Salt-Air Corrosion on Operator Housing
The gate side facing the water corrodes first. Bolts, wire terminals, and the grounding strap pit and green within a season or two on properties along the Intracoastal. We replace with marine-grade stainless hardware where it counts. On the electrical side, we clean and seal connections so the same failure doesn’t return next summer.
Surge and Lightning Damage
June through November means daily lightning in Fort Lauderdale. A nearby strike doesn’t have to hit your property to send a surge through the gate’s low-voltage wiring. When your opener’s display is blank after a storm, the control board sometimes took the hit while the motor is still fine. We test each component before recommending anything.
Automatic Gate Repair in Fort Lauderdale
Automatic Gate Repair in Fort Lauderdale means working on the full system, not just the operator. The motor turns, the control board tells it when to turn, the safety loops and sensors tell the board when to stop or reverse, and the keypad or remote tells the whole thing you’re home. When any one of those fails, the whole gate acts dead. Our job is to find which one it is.
On a canal-front street in Las Olas Isles, a homeowner’s LiftMaster slide gate operator quit after an afternoon squall tripped the GFCI-protected circuit. Our tech found a corroded keypad entry and a seized rack and pinion on the salt-air side, replaced the hardware, and reset the operator. On the same visit we found the swing-gate hinge post pulling out of saturated ground along an old block wall, so we set an independent post footing and did the sag correction. The panel was straight but the post was the real failure.
Automatic gate repairs in Fort Lauderdale typically range from $180 for a simple sensor replacement to $350 to $700 for motor or control board work. We quote the exact number before any work starts, and that’s the number you pay. Estimates are free. Call (855) 360-5306 and we’ll schedule a visit.
Safety Sensors and Entrapment Protection
Federal safety standards changed the way automatic gates reverse when they meet resistance or break a photo-eye beam. If your gate closes on a bump and keeps pushing, the entrapment protection isn’t doing its job. We test every sensor, edge, and loop on every repair call, not just the part you called about.
Hurricane-Season Wind Load and Post Failure
Solid-infill gates catch wind. That’s physics, and in a high-velocity hurricane zone like Fort Lauderdale, it’s also code. Posts lagged to pre-Andrew block or coral-rock walls often fail in saturated ground during the June – November season. We set independent post footings when the original mount won’t hold. A gate that stands straight in January can be leaning by October if the anchoring was never done right.
Trusted Brands We Service in Fort Lauderdale
We work on the brand already on your property. That means LiftMaster, FAAC, BFT, Linear, and the other systems Fort Lauderdale builders and security contractors have installed across the area for decades. Our technicians know each brand’s specific failure points before they arrive, which shortens diagnosis and keeps parts from being guessed at. We stock common boards, capacitors, safety edges, and keypads in our service vans for Fort Lauderdale customers, so many repairs finish the same day we arrive. No trial-and-error on unfamiliar systems, which saves you labor time and parts money.
Common Electric Gate Repair Problems We See in Fort Lauderdale Homes
- Salt-air corrosion on the Intracoastal and beach side: Gate operators, hinges, and keypad entry hardware pit and seize years before the inland side of the same property. Marine-grade stainless hardware is the fix, not just a replacement part.
- GFCI trips after summer squalls: Fort Lauderdale’s afternoon thunderstorms push water into operator housings and trip GFCI-protected circuits. A gate that worked all dry season suddenly won’t respond, and the cause is usually a compromised seal or degraded gasket.
- Wind-load anchoring failures on solid-infill gates: Posts lagged to pre-Andrew block or coral-rock walls fail in saturated ground during hurricane season. Independent post footings solve what masonry anchors never will.
- Power cuts leaving gates stuck closed: When the power goes out in a storm, your automatic gate needs a working manual release. If that release was never maintained or has seized, you’re locked out of or into your own driveway. We service and repair the manual release on every automatic gate repair call.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Fort Lauderdale, FL
Here’s what Fort Lauderdale homeowners can expect on our repair calls. A safety sensor or photo-eye replacement runs $180 to $260. Keypad and remote control reprogramming or replacement runs $150 to $300. Gate opener motor repairs run $225 to $450 depending on the brand and failure. Control board replacement runs $325 to $680 installed for LiftMaster, FAAC, BFT, and Linear systems. Full operator replacement, when repair isn’t viable, starts at $950 and goes up based on gate weight, length, and access.
Labor is flat-rate per job, not per hour, so you know the number before we start. Parts are quoted separately at cost plus installation. We never pad quotes or upsell a replacement when a repair gets you years more service. Call (855) 360-5306 for an exact quote. Estimates are free, and the price we quote is the price you pay.
We Also Serve Cities Near Fort Lauderdale
Our Electric Gate Repair in Fort Lauderdale service area extends into Plantation, Broadview Park, Broward Estates, and Lauderhill. If your property sits in one of those communities, the same team, the same brands, and the same straight pricing apply. Call us and we’ll confirm coverage for your street.
Serving Fort Lauderdale, FL — Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Fort Lauderdale
Every automatic gate has a manual release mechanism, usually a lever or keyed lock on the operator itself or on the gate. On slide gates, look for a release handle on the side of the motor housing; pull it and the gate can be pushed manually. On swing gates, the release is usually a keyed cylinder on top of the operator arm. Turn the key or pull the lever to disengage the motor, then push the gate by hand. If the gate won’t budge, don’t force it. The rack and pinion or a hinge may be seized from corrosion, especially on the salt-air side of an Intracoastal property, and forcing it can bend the gate frame or damage the operator’s output shaft. Call us at (855) 360-5306 and we’ll get your gate back online safely. High-tension springs and heavy panels are involved, so when in doubt, let a trained professional handle it.
Test it with a stationary object. Place a rigid object like a traffic cone or a small trash can in the gate’s path and close the gate. It should stop and reverse within two seconds of contacting the object, or before contact if the photo-eye beam crosses the opening and is working. If the gate doesn’t reverse from the contact sensor, that’s an immediate safety issue under UL 325 and ASTM F2200 standards. That gate can injure someone. Don’t keep using it. We test entrapment protection on every repair visit in Fort Lauderdale, and a sensor or edge replacement is one of the most common fixes we make. Call (855) 360-5306 for a service visit.
Most Fort Lauderdale properties are within a short drive of our service corridor, and we typically route technicians to the city every business day. For urgent calls, we prioritize gate systems that are stuck open or stuck closed because those are security and access problems, not just inconveniences. When you call before noon, we can usually have someone on site the same day. For properties in the 33322, 33323, 33324, and 33325 ZIP codes, add a little extra travel time depending on the time of day.
Yes. We service the whole city, from the beachside streets in 33301 through the Intracoastal islands of Las Olas Isles and Coral Ridge, to the inland communities along Commercial Boulevard, Sunrise Boulevard, and University Drive. Waterfront properties make up a large share of our calls because salt-air corrosion hits gate hardware harder there. We carry marine-grade stainless replacement hardware on the truck for exactly that reason.
Labor rates are the same across Broward County, so you won’t pay more for living in Fort Lauderdale. What changes is the failure itself. Properties within a mile of the Intracoastal or the ocean see more corrosion-related repairs, which sometimes means replacing hardware sooner than an inland property would. But our flat-rate repair pricing for gate opener repair, sensor replacement, and control board work stays consistent. Get a free quote by calling (855) 360-5306.
Get Your Fort Lauderdale Gate Fixed Today
Whether you’re dealing with a dead opener, a gate that won’t close after a squall, or a post pulling out of saturated ground, we’re ready to diagnose it and give you a straight answer. Call (855) 360-5306 for a free estimate. We’ll tell you what’s wrong, what it costs to fix, and whether repair makes more sense than replacement. That’s how we work in Fort Lauderdale.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Fort Lauderdale and Broward County.