Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Miramar
Electric gate repair in Miramar usually runs $185 – $440 for most residential calls, and our techs are typically in your neighborhood the same day you call. If your swing gate drags after a downpour or your slider slipped off its track during the last storm, Electric Gate Repair is exactly the work we do every week across the 33023 corridor. Call (855) 360-5306 and we’ll tell you over the phone what’s likely wrong and what the fix will cost before we even roll a truck.
Why Archway Gate Repair Is Miramar’s Preferred Electric Gate Repair Company
Miramar homeowners and HOA managers call us because we’re a gate-only shop. We don’t hang drywall, we don’t repair fences on the side, and we don’t guess at a brand we’ve never opened. Electric Gate Repair in Miramar is our whole business. Nelson Arrieta built Archway Gate Repair around one idea: when a LiftMaster opens fine but a FAAC won’t, the difference is knowing which control board revision you’re looking at before you order the part.
We work on the brand already on your property. In Miramar’s townhome communities and gated subdivisions, that’s often a mix of LiftMaster repair in Miramar for swing arms, FAAC hydraulic operators on older builds, and BFT articulated arms on newer construction. We know each system’s failure points: which capacitor dries out first in salt air, which hinge wears fastest on a 14-foot aluminum gate, which safety loop fails after a swale floods. Diagnosed, not guessed.
Response time to Miramar matters. When a gate won’t open, the whole community feels it. Residents can’t get to work. Deliveries pile up at the call box. We route our Miramar calls from our Miami Gardens shop and most jobs get a same-day visit. For a dead keypad or a tripped loop detector, we can often fix it in one trip. For a motor replacement or a control board rebuild, we’ll tell you upfront when parts arrive and when we’ll be back. Our quotes are always agreed before any work starts, so the invoice matches the number you approved.
Styles & brands we work with





Automatic Gate Repair in Miramar
Automatic Gate Repair in Miramar is rarely just a mechanical problem. The subtropical climate works against everything: salt-laden air oxidizes aluminum hinges, rainy-season downpours waterlog post footings, and hurricane-season wind loading tests every anchor and weld. When a Miramar homeowner calls us about an automatic gate that stopped mid-cycle, the cause is usually one of three things: a swollen post that threw the gate out of plumb, a corroded hinge putting extra strain on the operator, or a control board that finally gave out after too many power surges.
Automatic gate repair in Miramar typically runs $165 – $390 depending on what’s failed and whether we need to pull a new wire run or rebuild a hinge assembly. That covers diagnosis, labor, and standard replacement parts. We quote the full job before we start, and we don’t add trip charges on top of a repair.
Foundations Settle Before Operators Fail
Miramar’s 33023 corridor sits on sandy, high-water-table soil. Heavy rainy-season downpours don’t just flood the swales. They waterlog gate posts. A swing gate that drags the driveway often isn’t a hinge problem at all. The post footing settled and the gate no longer clears the concrete. We fix that by re-leveling the post and correcting the sag, not by selling you an operator you don’t need.
Salt Air Is a Full-System Problem
Year-round humidity and salt air from the coast corrode steel hardware and oxidize aluminum faster than most homeowners expect. Hinges bind. Tracks pit. Operator arms rust at the pivot points. We treat the corrosion and replace the worn hardware so the motor isn’t fighting the gate every cycle. That’s how an operator lasts another five years instead of one.
Electric Gate Motor in Miramar
Electric Gate Motor repair in Miramar usually means one of two things: the motor runs but the gate barely moves, or the motor hums and trips its thermal overload. Both are common in this climate. Salt air and humidity shorten motor life. Storm surges knock out power and spike the board. When a motor fails, your gate becomes a very heavy fence ornament. Our job is to get the gate back online, whether that means a capacitor, a limit switch, a new motor, or a full operator rebuild.
Electric gate motor repair in Miramar runs $220 – $480 for most residential operators, and $350 – $750 for larger commercial swing or slide operators. The price depends on the motor type, whether it’s a swing arm or an in-ground hydraulic unit, and whether the failure damaged the control board. We tell you the exact number before we touch a wire.
Motors That Burn Out Early
Builder-grade operators on Miramar’s newer gated communities fail early for a simple reason: they were never sized for a 14-foot aluminum gate in a wind zone. The motor strains, overheats, and dies two or three years into its life. We see it constantly off Miramar Parkway. Replacing the motor is fine, but we’ll also check whether the gate itself needs a weight correction so the new motor isn’t doomed from day one.
Control Boards and Power Surges
South Florida’s lightning season kills control boards. One close strike and your board fries even if the motor is fine. We stock common LiftMaster and FAAC replacement boards for Miramar customers, which cuts repair time from days to hours. If we don’t have your exact revision, we order it and get you running with a temporary override when safe.
Trusted Brands We Service in Miramar
Archway Gate Repair is factory-familiar with the brands already installed across Miramar: LiftMaster swing and slide operators, FAAC hydraulic arms on older estate gates, BFT articulated systems in newer HOAs, and Linear boards on commercial entry gates. We know each system’s specific failure points, which means faster diagnosis and fewer wrong parts. For Miramar customers, we keep common LiftMaster and FAAC parts on hand so a simple board swap or capacitor replacement doesn’t wait on a shipment. From the motor to the hinge, one company handles it.
Common Electric Gate Repair Problems We See in Miramar Homes
- Post-footing settlement: Sandy, high-water-table soil soaks up rainy-season downpours, gate posts settle, and swing gates drag or won’t latch. It looks like a hinge problem. It’s a foundation problem.
- Salt-air hinge corrosion: Aluminum hinges oxidize and steel pins rust in the year-round humidity, putting extra strain on the motor and causing slow, jerky operation.
- Storm misalignment: Hurricane-season wind loading flexes fence lines and pushes sliders off their tracks. Post-Andrew code means anchors get inspected, but builder-grade hardware often falls short.
- HOA shared-entry failures: Keypad systems, loop detectors, and telephone entry units in Miramar’s townhome communities fail together because they share one power source and one weather-exposed enclosure.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Miramar, FL
Here’s what Miramar homeowners typically pay. Gate motor repair: $220 – $480 residential, $350 – $750 commercial. Automatic gate repair (diagnosis, labor, and standard parts): $165 – $390. Keypad or remote programming: $90 – $160. Safety sensor or loop detector replacement: $140 – $280. Control board replacement: $180 – $420 depending on brand and revision. Soil-related sag correction and post re-leveling: $250 – $550 when the footing needs concrete work. Every quote is given and agreed before any work starts. Call (855) 360-5306 for a free estimate.
We Also Serve Cities Near Miramar
Our techs cover the full Miramar area, including Andover, Carver Ranches, West Park, and Hollywood. If your gate is down in any of these nearby communities, Miramar dispatch times apply. One call gets a brand-trained tech headed your way.
Serving Miramar, FL — Our Local Coverage Area
We’re based in the Miramar area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Miramar
We’ll give you a written scope and specification before any work begins, including gate style, height, finish, operator model, and safety device list, so you can submit it to your HOA’s architectural review board. Our team has worked with management companies throughout Miramar’s gated communities, and we can sit on a call with your property manager if the board has questions. Loaner gates aren’t something we offer, but we’ll match our schedule to your approval timeline when you need work staged. Call (855) 360-5306 to get the documentation started.
Because the problem is under the post, not at the hinge. Miramar’s 33023 corridor sits on sandy, high-water-table soil, and heavy rainy-season downpours waterlog gate posts, causing the footing to settle and the gate to lose its driveway clearance. We re-level the post and correct the sag rather than replacing a hinge that was never the issue. Call (855) 360-5306 and we’ll diagnose it on site.
Yes. We service the full gate ecosystem, including keypads, loop detectors, telephone entry units, safety sensors, and the operator, so your HOA doesn’t need to call a second company. In Miramar’s townhome communities, these systems share one power source and one weather-exposed enclosure, which means a failure in one component often signals trouble in another. We test the whole chain. Call (855) 360-5306 to schedule a system check.
Automatic gates in Florida must have entrapment protection: photo-eye sensors, reversing edges or loops, and audible alarms on systems that could entrap a person or vehicle. We test every safety device on every repair visit and show you how to run a monthly check yourself. A gate that doesn’t reverse when it hits a trash bin is a gate that needs service. Call (855) 360-5306 if your sensors haven’t been tested this year.
Yes. Wind loading from hurricane-force gusts commonly shoves sliders off their tracks, bends swing gate hinges, and pulls anchors out of sandy soil. We assess the full system: track alignment, post plumb, hinge wear, and operator strain. If the gate is repairable we repair it. If the storm damage compromised the structure itself, we’ll quote a replacement and handle the installation too. Call (855) 360-5306 for a storm-damage assessment.
Call Archway Gate Repair for Electric Gate Repair in Miramar
Your gate is your home’s first line of entry. When it fails, you need a gate specialist, not a general handyman with a multimeter. Nelson Arrieta and the Archway Gate Repair team work on the gate brands already installed across Miramar, from LiftMaster swing arms to FAAC hydraulic operators, and we fix them right the first time. Call (855) 360-5306 for a free estimate. We’ll tell you what’s wrong, what it costs, and when we can be there. Every price is quoted and agreed before any work starts.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Miramar and South Florida’s gate communities.