Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Naples
When an electric gate fails in Naples, it usually does not fail quietly. A swing gate stuck halfway across a Port Royal driveway traps cars inside or out. A slide gate off its track at a Pelican Bay entry backs up traffic on US-41 before the property manager finishes their coffee. We fix both, and we know the difference between the two jobs before we arrive. Archway Gate Repair is a gate-only specialist serving Naples, Golden Gate, Vineyards, Lely, and Naples Manor. If your gate motor is dead, your keypad is dead, or your gate is moving when it should not be, call (855) 360-5306. We diagnose first, quote before any work begins, and we work on the brand already on your property.
Why Archway Gate Repair Is Naples’s Preferred Electric Gate Repair Company
Naples runs on gates. The city splits into two repair worlds that the same technician often handles in one afternoon: private estates in Port Royal and Olde Naples with custom wrought-iron automated driveway gates a few blocks from Gulf beachfront, and the thousands of low-rise 55+ gated condo and golf communities off US-41 whose access gates, sliding barriers and call boxes serve high-volume daily traffic and are typically HOA-maintained. We move between both worlds without blinking, because we have seen every failure mode each one produces.
What Naples customers get from us is narrow expertise. We are not a fencing company that also does gates. We are not a general handyman. Electric gate repair is our core work: motors, control boards, safety loops, wiring, keypads, remote controls, and the mechanical side from the motor to the hinge. When a Naples homeowner calls about a LiftMaster swing operator that will not close, we already know the common failure points for that board revision. That means fewer return trips and no parts guesswork billed back to the customer.
Our Electric Gate Repair team works throughout Naples, including the 34114, 34116, 34117, and 34119 ZIP codes. We answer the phone, we show up when we say we will, and the price you agree to before the repair starts is the price on the invoice. For Naples HOAs and property managers, we can coordinate directly with boards and management offices so repair authorization does not stall the work. Our owner, Nelson Arrieta, has built the company around one principle: repair first, replace only when necessary.
Styles & brands we work with
Electric Gate Motor in Naples
Electric Gate Motor repair in Naples usually comes down to three things the customer already suspects: the motor ran past its duty cycle, the wiring feeding it was never right, or the salt air finally got inside. In a city where so many homes are 1970s-2000s concrete-block construction in master-planned communities, builder-grade operators were often installed with undersized conduit and no weather protection. We see that pattern constantly in newer developments off Immokalee Road and Collier Boulevard. A typical gate motor replacement or repair in Naples runs $450 to $1,100 depending on the operator type and whether new conduit or wiring is required.
What the repair actually involves
We start by checking voltage at the motor, not by swapping parts. A gate motor that hums but does not move is often getting low voltage from a corroded splice or an undersized wire run that was buried years ago. In Naples, UV-brittle conduits and salt-crusted junction boxes are common, especially east of US-41 where irrigation and high water tables keep everything damp. We trace the circuit, confirm the motor windings, and only then recommend repair or replacement with a specific parts list and a written price.
When replacement is the honest answer
Some Naples gate motors are simply done. A residential swing operator that has run daily for 15 years in salt-laden air near Naples Bay may be more expensive to rebuild than to replace with a current equivalent from Ghost Controls, Linear, or Viking. We will tell you plainly. And when we replace a motor, we do proper conduit, weather-rated connectors, and a full cycle test, so the new unit is not repeating the old failure inside eighteen months.
Gate Access Control in Naples
Gate Access Control in Naples means more than the motor. It is the keypad, the remote receiver, the phone line or cellular unit, and the safety loops that tell the gate when to stop and reverse. When a visitor cannot get into a Lely community because the call box is dead, or a homeowner cannot get out of Olde Naples because the exit loop is not detecting a car, that is access control. Repair pricing for keypads, receivers, and loop detectors in Naples typically runs $250 to $600, with full control board replacement between $700 and $1,500 depending on the system.
Keypads, remotes, and call boxes
We repair and replace Mighty Mule, DoorKing, and BFT keypads and receivers, along with the older Linear systems still common in Collier County HOAs. A keypad that lights up but will not open the gate usually has a failed relay or a corroded ribbon connector from humidity. A remote that opens the gate only from ten feet away usually points to a receiver antenna that has been sun-baked on a metal post for a decade. When we diagnose, we test the whole chain, not just the part the homeowner suspects.
Safety loops and photoelectric sensors
Safety sensors fail often in Naples. Salt film fogs the lens, UV degrades the housing, and storm debris nudges the alignment just enough to make the gate reverse for no visible reason. A photoelectric sensor that keeps tripping is not a nuisance, it is a safety circuit doing its job badly. We clean, realign, or replace, and we check the sensitivity settings rather than simply bypassing the sensor. On HOA gates, those adjustments are done with the board’s authorization and documented.
Trusted Brands We Service in Naples
We work on the brand already on your property. That includes LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, covering both residential driveway systems and commercial HOA entry equipment. This brand familiarity matters in Naples, where a condominium built in 1998 may still be running its original Viking slide operator while the house next door has a Ghost Controls swing kit installed last year. We carry common boards, remotes, and sensors for these systems on our trucks, and we know which parts distributers in Collier County can get oddball components the same week. For Naples Ghost Controls service, we stock the most common boards and remotes. That means faster diagnosis and fewer days with your gate stuck open.
Common Electric Gate Repair Problems We See in Naples Homes
- Builder-grade operators with undersized power runs: Newer Naples developments often get entry gates installed manual during construction and automated later by the lowest bidder. The conduit is too small, the wire gauge is too thin, and the voltage at the motor drops under load. We correct the electrical first, then the operator.
- Salt-air corrosion on coastal estates: Port Royal and Olde Naples gates sit a few blocks from the Gulf. Operator housings pit, circuit boards corrode, and photoelectric sensors fog from salt film. Coastal gates need more frequent cleaning and seal replacement than identical systems just three miles inland.
- High-cycle HOA gate failures: Community entry gates in Pelican Bay, Vineyards, and Lely may cycle hundreds of times a day. Rack and pinion systems wear, rollers flatten, and storm debris from June through November jams tracks and trips safety edges. These jobs often wait for HOA board approval, which is why we provide clear written diagnostics the board can act on immediately.
- Sagging gates misdiagnosed as panel problems: A gate that drags or will not close fully is usually a hinge post that has settled in sandy Collier County soil, not a bent gate panel. We check post alignment and hinge wear before recommending any panel work. In many Naples cases, the gate was never correctly mounted for the slope and drainage of the driveway.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Naples, FL
Electric gate repair in Naples typically costs $180 to $340 for a service call and minor repair such as sensor alignment, limit switch adjustment, or remote reprogramming. Gate motor replacement runs $450 to $1,100. Control board replacement runs $700 to $1,500. Full Electric Gate Repair in Naples work, such as adding automation to a manual gate with new conduit and safety edges, typically ranges $1,800 to $4,500. What moves the number: the condition of the existing power run, whether conduit needs replacing, whether the gate posts are still square, and whether HOA specifications require specific equipment. Every quote is written and agreed before any work starts. Call (855) 360-5306 for a free estimate. We will not surprise you.
We Also Serve Cities Near Naples
From our base serving Naples and the surrounding Collier County communities, we regularly run calls to Golden Gate, Vineyards, Lely, and Naples Manor. If your gate is acting up in any of these areas, we are close enough to get to you without burning a morning. The same technicians, the same trucks, the same repair-first approach.
Serving Naples, FL — Our Local Coverage Area
We’re based in the Naples area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Naples
Newer Naples developments fail most often because the gate was installed manually during construction and automated years later without proper conduit or wire sizing, causing voltage drop and corrosion. The builder puts in a gate to satisfy the HOA, then an automation contractor runs exposed wiring through soil and sun, and within two or three years the operator is intermittent. The fix is usually a new dedicated power run, not another motor. We see this pattern repeatedly in the 34119 and 34117 ZIP codes. Call (855) 360-5306 and we will check the voltage at the motor before recommending anything.
Salt air corrodes the operator housing, the control board contacts, and the photoelectric sensor lenses, causing intermittent failures and false safety trips. Port Royal gates sit close enough to the Gulf that onshore wind carries a fine salt mist year round, and summer humidity accelerates the corrosion inside vented housings. We recommend sealed enclosures, marine-grade connectors, and more frequent sensor cleaning on coastal estates. One service call early in the corrosion cycle is cheaper than a full operator replacement later. For a coastal inspection, call (855) 360-5306.
The first thing to check is whether the gate is in manual-release mode and whether debris is jamming the track, because post-storm failures in Naples are usually physical rather than electronic. High winds push palm fronds and landscaping debris into slide tracks and under swing gates, tripping the safety edges and stopping the cycle. If the gate has power but will not move, the manual release is often still disengaged from a pre-storm preparation. We clear the track, check limit alignment, and re-engage the operator. If your HOA gate needs a storm-damage inspection, call (855) 360-5306.
Yes, we add automation to existing manual gates in Naples regularly, including new conduit, a properly sized power run, the operator, safety sensors, and wiring. This is the work that should have happened when the gate was built, and in Naples it frequently did not. A full automation package on an existing wrought-iron swing gate or aluminum slide gate typically runs $1,800 to $4,500 with a written quote before we begin. We match the operator to the gate weight, the hinge condition, and the wind exposure, not to whatever is on sale. Call (855) 360-5306 for a free measure and price.
Your gate sags because the hinge post is moving in the ground, not because the hinges are out of adjustment, and tightening the hinges repeatedly will not fix it. In Naples, sandy soil and high water tables let gate posts settle and lean over time, especially on the wet side of a driveway near a swale or pond. The real fix is to reset the post in a properly sized concrete footing, re-square the gate, then re-tension the hinges. Adjusting hinges without fixing the post just buys you a few weeks before the gate drags again. We can check your post depth and movement in one visit; call (855) 360-5306.
Call Archway Gate Repair for Electric Gate Repair in Naples
If your gate is stuck, noisy, moving erratically, or showing error codes you cannot identify, call us. We answer the phone, we listen to the symptom, and we tell you honestly what the likely cause is before we arrive. Every job starts with a diagnosis, not a suggestion to replace the whole system. We repair electric gates in Naples, Golden Gate, Vineyards, Lely, and Naples Manor. Call (855) 360-5306 for a free estimate, and you will get a written price before any work begins, every time.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Naples and Collier County with gate-only repair and installation expertise.