Electric Gate Repair in North Palm Beach — Fixed Today, No Surprise Invoice

Fast, Reliable Electric Gate Repair Across North Palm Beach

Electric gate repair in North Palm Beach usually means one of three things: a motor that stopped responding, a keypad or remote that quit working after a storm, or a gate that sags and drags because the post footing shifted. Most repairs in the 33408 zip code run between $180 and $680 depending on whether we’re replacing a capacitor or a full control board. Our team covers North Palm Beach daily, and we’re the Electric Gate Repair specialists homeowners call when a gate that used to work fine suddenly won’t open. Call (855) 360-5306 and we’ll diagnose the problem over the phone before we send a truck.

Call (855) 360-5306

Why Archway Gate Repair Is North Palm Beach’s Preferred Electric Gate Repair Company

Nelson Arrieta built Archway Gate Repair around a simple idea: gate work is its own trade, not a side job for a general handyman. Our technicians work on the brand already on your property. LiftMaster, FAAC, BFT, Viking, Linear, Ghost Controls, DoorKing, Elite, Mighty Mule. We know each system’s failure points before we arrive, which means faster diagnosis and fewer parts guesses on your invoice.

North Palm Beach customers call us because the salt air off the Intracoastal and Atlantic doesn’t wait. Hinge posts corrode. Operator housings pit. Keypads short after wind-driven rain. Homes along Prosperity Farms Road and the older streets near the North Palm Beach Country Club have their own set of problems: original 1960s and 70s gate posts set in sandy soil that shifts after every heavy summer downpour. A gate that drags on one corner isn’t always a worn hinge. Often the post itself moved. We know the difference because we’ve seen it enough times on this specific stretch of Florida coastline.

We answer our phones. We show up when we say we will. And we quote the price before any work starts, so you never get a surprise invoice at the end.

Gate Opener Repair in North Palm Beach

Gate Opener Repair in North Palm Beach typically means the motor runs but the gate doesn’t move, or the gate moves halfway and reverses. The first thing we check is the operator’s drive mechanism, then the control board, then the safety sensors. In this coastal market, a straightforward opener repair, like replacing a capacitor or limit switch, runs $120 to $260. A full opener replacement, including labor, lands between $650 and $1,800 depending on the gate’s weight and the operator brand.

Older LiftMaster and FAAC units near the Intracoastal fail faster than inland units. The salt that eats car paint does the same thing to motor windings and connector terminals. Our team pulls every connection, cleans the corrosion, and reseats whatever can be saved before recommending a replacement. Repair first, replace only when necessary.

Motor runs but gate won’t move

This usually points to a broken drive chain, stripped gear, or a failed capacitor. We see it most often on heavier custom wrought-iron gates in the waterfront communities off Lakeshore Drive and Country Club Drive, where the operator has been overworked for years without a service call.

Opener cycles but reverses immediately

That’s almost always a safety sensor issue. After hurricane-season rain, moisture gets into the sensor housing and triggers false obstruction readings. We test the alignment, clean or replace the sensor, and the opener usually cycles normally the same day.

Automatic Gate Repair in North Palm Beach

Automatic Gate Repair in North Palm Beach covers the full system: motor, control board, safety loops, keypads, and the wiring in between. If your gate opens for the remote but not the keypad, or the intercom releases the latch but the swing won’t start, the problem sits somewhere in the automation chain. Typical repairs run $180 to $680. A full control board replacement on a newer FAAC or BFT unit runs $450 to $900, including the part and programming.

North Palm Beach’s high-end properties, especially the estates east of US-1 and the gated communities along Prosperity Farms Road, often run underground operators and custom-fabricated gates. These systems are engineered to handle a specific gate weight and swing arc. When the post shifts or the hinges bind, the operator works harder than it was designed to, and the motor burns out years early. We fix the mechanical cause before we replace the electrical component. Otherwise you’ll replace the same operator again in 18 months.

Keypad and remote entry repairs

Lightning surges during summer thunderstorms are the usual culprit. A nearby strike sends current through the keypad wiring and fries the control board. We replace the damaged components, install a surge protector where the system lacks one, and reprogram all remotes and keypad codes.

Safety loops and photocells

Salt corrosion affects these too. When a safety loop fails, the gate won’t close automatically because the system thinks a car is sitting on the loop. We locate the break, splice a new loop into the driveway, and test the full entrapment protection system before leaving.

Trusted Brands We Service in North Palm Beach

We work on LiftMaster, FAAC, Mighty Mule, Elite, and every other major brand installed across North Palm Beach. Our fleet carries common replacement parts for these systems, so most opener and control board jobs finish in one visit. If you have a custom gate with a Viking or DoorKing operator, our technicians know the programming menus and wiring schematics without reading the manual in your driveway. We don’t guess at unfamiliar equipment. Diagnosed, not guessed is how we run every call, from a 1970s swing gate off Prosperity Farms Road to a new underground operator at a waterfront estate.

Common Electric Gate Repair Problems We See in North Palm Beach Homes

• Shifting gate posts from sandy soil: The original posts on many 1960s – 70s homes were set without deep concrete footings. After heavy rain, the sand beneath them settles and the post tips, causing the gate to sag and drag. The fix is re-setting the post footing, not just adjusting the hinge.
• Salt-corroded hinge and operator components: Ocean air doesn’t just rust the visible parts. We regularly replace hinges, operator arms, and internal motor mounts that have corroded from salt exposure on properties east of US-1 and along the Intracoastal.
• Storm-damaged control boards and keypads: Lightning and wind-driven rain short keypads and control boards during hurricane season. After a storm, homeowners often find the keypad unresponsive and the gate stuck in manual mode.
• Landscaping interference with swing paths: North Palm Beach’s mature tropical landscaping grows fast. Palms and hedges intrude on swing arcs and block safety sensors, forcing the gate to reverse. We trim clearance and reposition sensors so the gate cycles freely.

Pricing for Electric Gate Repair in North Palm Beach, FL

We Also Serve Cities Near North Palm Beach

Archway Gate Repair handles electric gate repair throughout northern Palm Beach County. We regularly run calls to Lake Park, Palm Beach Shores, Riviera Beach, and Palm Beach Gardens. If you’re in one of those areas, our Electric Gate Repair in North Palm Beach team can reach you just as quickly, with the same brand-specific diagnostic approach and upfront pricing.

FAQs About Electric Gate Repair in North Palm Beach

Contact Archway Gate Repair in North Palm Beach

If your electric gate won’t open, sags on one hinge, or stopped responding to the remote, call (855) 360-5306. We service all of North Palm Beach, from the Country Club area to the waterfront estates along the Intracoastal. Nelson Arrieta and the team will give you an honest diagnosis and a written quote before we start. Free estimates. No pressure. From the motor to the hinge, we fix the whole system right.

Written by Nelson Arrieta, Owner at Archway Gate Repair, serving North Palm Beach and northern Palm Beach County.