Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Ocean Ridge
Electric gate repair in Ocean Ridge typically costs $180 – $680 depending on whether you’re dealing with a corroded keypad, a failed control board, or a full operator replacement. Most jobs are diagnosed same-day. If you live on the barrier island, you already know the salt air works faster than anything inland. Call us at (855) 360-5306 and we’ll send a technician who knows Ocean Ridge conditions, not someone seeing coastal corrosion for the first time.
We work on the brand already on your property. Whether it’s a LiftMaster on A1A or a BFT swing operator off Old Ocean Boulevard, our team arrives knowing the failure points before we pull into your driveway. Electric gate back online is the outcome we’re after, and it’s why Ocean Ridge homeowners call us first.
Why Archway Gate Repair Is Ocean Ridge’s Preferred Electric Gate Repair Company
Ocean Ridge is a narrow strip of barrier island, and most properties sit minutes from salt water on both sides. That changes every aspect of electric gate repair. Nelson Arrieta built Archway Gate Repair around one idea: gate systems need a specialist, not a handyman who also patches drywall. Our technicians are factory-familiar with nine major brands including LiftMaster, FAAC, BFT, DoorKing, and Mighty Mule, so the diagnosis on an Ocean Ridge estate is faster than a generalist’s trial-and-error visit.
We’ve worked on gated estates along Ocean Drive, Hammock Park, and the waterfront lots near Woolbright Road. The failures we see repeat: salt-corroded hinge posts, wind-racked slide tracks, keypads that stop reading after a storm surge of humidity. Ocean Ridge customers don’t want a quote for a full replacement when a control board swap fixes the problem. Repair first, replace only when necessary. We quote the price before any work begins.
Styles & brands we work with





Gate Opener Repair in Ocean Ridge
Gate opener repair in Ocean Ridge usually means one of three things: a motor that hums but won’t move, an operator arm that grinds against salt-crusted brackets, or a control board that took on moisture during the last storm. We handle all three. A typical gate opener repair in Ocean Ridge runs $220 – $480, including parts. If the opener has failed completely and needs replacement with a wind-rated unit, expect $850 – $2,200 depending on the gate’s size and whether we’re matching an existing brand like Linear or Viking.
Motor and Arm Replacement
On wall-mounted and pillar-hung installations, the operator arm takes the brunt of the coastal environment. Salt spray pits the piston surface and eats the mounting hardware. When we replace an arm on Ocean Ridge property, we use marine-grade fasteners and sealed boots so the repair holds longer than the original install.
Control Board Diagnosis
A gate that opens fine all morning and fails by afternoon often points to a dying control board, not a motor. We test the board on-site, confirm the failure, and show you the exact part before we order it. No guessing. Diagnosed, not guessed.
Automatic Gate Repair in Ocean Ridge
Automatic gate repair in Ocean Ridge covers the entire powered system: operator, wiring, safety sensors, keypad, and remote controls. We treat the gate as one ecosystem, from the motor to the hinge. A typical automatic gate repair in Ocean Ridge runs $180 – $680. The price depends on whether we’re replacing a single component like a safety sensor or rebuilding the system after a storm took out the board and the keypad together.
Sensor and Safety Loop Work
Safety edges and loop detectors fail invisibly. A gate that reverses for no reason or won’t hold open usually has a sensor issue, not a motor problem. On Ocean Ridge’s estate lots, we also check the photo eyes for salt film buildup, which tricks the system into thinking something is in the path.
Keypad and Remote Programming
Corroded keypads are the single most common failure we see after a nor’easter. Sealed keypads and long-range remotes solve most Ocean Ridge access problems, and we can reprogram existing codes while on-site.
Trusted Brands We Service in Ocean Ridge
We work on the gate system already installed at your Ocean Ridge property. That includes BFT and Viking swing operators common on the newer mansion lots, Linear systems on some of the older ranch-era homes, and Ghost Controls retrofits on gates that started life as manual. Our Electric Gate Repair team carries common control boards, keypads, and remote transmitters in our vehicles, which means faster turnaround for Ocean Ridge customers who don’t want to wait a week for a part to ship. If your brand isn’t on the tip of your tongue, that’s fine. Send us a photo of the gate and operator, and we’ll likely know it before we arrive.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Ocean Ridge Homes
- Salt-corroded keypads and control boxes. The barrier island’s onshore spray coats everything within a quarter mile of the water. Keypads stop responding, and control boards short out from moisture ingress.
- Hinge post failure in saturated ground. After heavy rain or a storm surge, the sandy soil around pillar footings loosens, and the gate starts dragging or binding. We realign the post and re-anchor the footing before the gate destroys its own motor.
- Wind-racked slide tracks and strained operator arms. Solid infill gates catch wind like a sail. In Ocean Ridge, that means bent slide tracks, stripped racks, and operator arms that fail under repeated stress.
- Power-outage lockouts. After a storm knocks out electricity, some automatic gates remain locked until manually released. We show every Ocean Ridge homeowner the safe release procedure, and we can add a battery backup so the gate keeps working when the grid drops.
Pricing for Electric Gate Repair in Ocean Ridge, FL
Here’s what you can expect to pay in Ocean Ridge for common electric gate repairs:
- Keypad replacement with sealed, marine-rated unit: $180 – $350
- Control board diagnosis and replacement: $280 – $650
- Operator arm replacement: $220 – $480
- Safety sensor or loop detector repair: $180 – $400
- Full operator replacement including wind-rated unit: $850 – $2,200
- Emergency after-storm response and diagnosis: $95 – $150 trip charge, credited toward repair
Every job is quoted and agreed before work starts. You’ll know the exact number before we touch a single wire. Estimates are free, and calling costs you nothing. For a water-logged control board on an ocean-facing gate, the price changes if we also need to seal the enclosure or replace the keypad. That’s where the free estimate matters. Call (855) 360-5306 and we’ll give you a straight number.
We Also Serve Cities Near Ocean Ridge
Our Ocean Ridge service area extends to the surrounding coastal communities. We regularly handle electric gate repair in Boynton Beach, Atlantis, Hypoluxo, and Lantana. If your property sits just over the town line, the same coastal conditions apply, and we’ll get you the same wind-rated upgrades and salt-resistant parts.
Serving Ocean Ridge, FL — Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Ocean Ridge
Ocean Ridge sits on a narrow barrier island with salt-laden onshore breezes and storm surge that push moisture into every electrical component. Keypads corrode, control boards short, and hinge posts shift in saturated sandy soil. Inland Palm Beach County gates see a fraction of this exposure.
Yes, and this is a common call in Ocean Ridge. Most operators can be reset and reprogrammed, but if a surge took out the board, we replace it. We can also install a battery backup so your gate keeps operating during the next outage. Call (855) 360-5306 for an exact quote.
Most automatic gates have a manual-release mechanism on the operator. Find the release handle or key, usually located on the operator housing, and disengage it. You can then push the gate open by hand. If you’re not sure where yours is, call us and we’ll walk you through it over the phone. Never force a gate while it’s still engaged, because that can damage the operator and injure someone.
Yes, town code reviews often require wind-rated operators and positive stops on replacement gates in Ocean Ridge. We’ve handled multiple replacements on ocean-facing estates where the original system didn’t meet current code. We’ll handle the permitting and make sure your gate passes the first time.
We realign the hinge post, re-anchor the footing, and perform sag correction on the gate leaf. On Ocean Ridge’s masonry pillar installations, the post often shifts in saturated ground, which is why the gate drags. Once realigned, we adjust the operator arm so it’s not fighting the gate’s weight. Call (855) 360-5306 for a free estimate.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Ocean Ridge and coastal Palm Beach County.