Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Palm Beach Shores
If your electric gate has stopped opening, started grinding, or only moves halfway, you need a technician who understands what salt air does to gate hardware in Palm Beach Shores. On Singer Island, a standard gate opener that would run for years inland often fails within two seasons because of corrosion inside the motor housing and gearbox. Our Electric Gate Repair team works on the brands already installed across Palm Beach Shores properties, from mid-century cottages near the Lake Worth Lagoon to newer elevated homes two blocks from the Atlantic. Call (855) 360-5306 and we’ll diagnose the problem correctly the first time.
Key Takeaways:
- Electric gate repair in Palm Beach Shores typically runs $195 – $485 for most opener, control board, and hinge failures.
- Salt air corrodes ground-level operators internally within 18 – 24 months, far faster than the 5+ years inland units get.
- We stock marine-grade stainless fasteners and sealed replacement parts specifically for Palm Beach Shores conditions.
- Free estimates with upfront pricing, quoted and agreed before any work starts.
Why Archway Gate Repair Is Palm Beach Shores’s Preferred Electric Gate Repair Company
Palm Beach Shores is a compact barrier-island town of about 1,100 residents, and word travels fast here. A technician who shows up guessing doesn’t last long. We approach every call on Singer Island the same way: diagnose the failure, explain what caused it in plain terms, and quote a repair price before turning a single screw. That discipline is why property managers at low-rise condos near Edwards Lane and homeowners along Inlet Way call us back when a second gate fails.
Our technicians are trained across nine of the most widely installed gate brands, including LiftMaster, FAAC, BFT, DoorKing, Elite, and Mighty Mule. When a Palm Beach Shores customer tells us their opener is a FAAC swing model or an Elite slide operator, we know the failure points for that specific system before we arrive. That brand familiarity means less time on site, fewer parts ordered by mistake, and a repair bill that reflects actual labor, not trial and error.
Most importantly, we’re a gate specialist. A general handyman might replace a hinge and miss the control board that’s been shorting out for weeks. We work from the motor to the hinge because that’s what an electric gate actually is: a system, not a door. And we’re honest about when a full replacement is the smarter spend versus when a $220 gearbox repair gets you another three years.
Styles & brands we work with
Gate Opener Repair in Palm Beach Shores
Gate Opener Repair in Palm Beach Shores usually means one of three things: the motor has failed, the control board has shorted, or the gearbox has seized. On this barrier island, the salt-laden air accelerates all three. Most opener repairs in Palm Beach Shores run $225 – $485 depending on whether we’re replacing a capacitor, a control board, or a gearbox assembly.
Motor and Gearbox Work
Ground-level operators on Singer Island take the worst of it. Humid, salt-heavy air gets drawn into the housing every time the motor cycles, and within 18 – 24 months the internal gears can be caked with white aluminum oxide. We recently serviced a LiftMaster swing gate operator on a mid-century cottage near the Lake Worth Lagoon in Palm Beach Shores. The gearbox was fused with salt crust, causing the gate to seize mid-cycle. We replaced the gearbox with a sealed marine-grade unit, swapped every fastener to 316 stainless, and coated the control board enclosure against further corrosion.
Control Board Diagnosis
When a Palm Beach Shores gate opens on its own, won’t respond to the remote, or trips the breaker repeatedly, the control board is the usual suspect. Salt air corrodes board contacts even inside sealed enclosures. We test the board, verify power delivery, and replace it only if the board is genuinely dead. Repair first, replace only when necessary.
Automatic Gate Repair in Palm Beach Shores
Automatic Gate Repair in Palm Beach Shores covers everything from safety sensor failures to full automation that won’t cycle. If your gate stops halfway, reverses for no reason, or won’t close at all, the problem is usually in the automation, not the gate itself. Typical automatic gate repairs in Palm Beach Shores run $195 – $420 including parts and labor.
Safety Sensors and Entrapment Protection
Palm Beach Shores properties sit low and close to the water, so storm-driven rain and debris get into places inland gates never see. Low-mounted loop detectors and safety photocells get clogged with sand and salt residue, which disables entrapment protection. If the gate closes on a car or won’t stay open, we check the sensors first. Replacing a pair of corroded photocells is usually a $180 – $260 job.
Keypads, Remotes, and Access Systems
Salt air eats keypad contacts and remote control battery compartments faster in Palm Beach Shores than almost anywhere in Palm Beach County. If your keypad works intermittently or the remote only opens the gate from ten feet away, we test the receiver and the keypad independently so you’re not paying to replace parts that still work.
Trusted Brands We Service in Palm Beach Shores
We work on the brand already on your property. That matters in Palm Beach Shores because most gates here were installed by whoever built the house or condo, and they used what was available: LiftMaster, FAAC, Mighty Mule, Elite. Nelson Arrieta and our technicians know each system’s specific failure points. A Mighty Mule opener has a different weak point than a FAAC. An Elite slide operator fails differently than a LiftMaster swing. We keep common replacement parts and corrosion-resistant hardware on the truck for Palm Beach Shores calls, so most repairs happen in one visit.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Palm Beach Shores Homes
- Hinges and posts seizing from salt crust: Aluminum oxide builds up between the hinge leaf and the post, the gate starts to sag, and the operator strains to move it. This is the single most common call we get from Palm Beach Shores properties. The fix is cleaned and rebuilt hinges with 316 stainless fasteners, not another squirt of WD-40.
- Control boards corroding from the inside: Even enclosures rated for outdoor use let humid salt air in over time. The board shorts, the gate works intermittently, and then one day it doesn’t work at all. We replace boards with marine-grade sealed units and coat the enclosure.
- Loop detectors and photocells failing after storms: Low-mounted sensors in Palm Beach Shores get hit by standing water and wind-blown sand from Lake Worth Lagoon and the ocean side. When the gate won’t hold open or keeps reversing, it’s usually a loop detector or photocell pair that needs replacement.
- Gate wheel and track corrosion on slide gates: Slide gate rollers and tracks in Palm Beach Shores pit and oxidize within two to three seasons. The gate grinds, jumps the track, or stalls the motor. We replace rollers and tracks with corrosion-resistant components rather than painting over the problem.
Pricing for Electric Gate Repair in Palm Beach Shores, FL
Most electric gate repairs in Palm Beach Shores fall between $195 and $485. A hinge rebuild with stainless fasteners typically runs $195 – $280. A control board replacement is $260 – $420. Gearbox replacement on a swing operator is $325 – $485. If the motor itself is gone, a new opener install in Palm Beach Shores usually lands between $1,200 and $2,600 depending on the brand and gate type. Every price is quoted and agreed before any work starts, and estimates are free. Call (855) 360-5306 and we’ll give you a number over the phone for most common failures.
We Also Serve Cities Near Palm Beach Shores
Archway Gate Repair provides Electric Gate Repair in Palm Beach Shores and throughout the surrounding barrier island and mainland communities. We regularly work in Riviera Beach, Lake Park, Mangonia Park, and North Palm Beach, where salt air and coastal conditions create the same corrosion issues we see on Singer Island.
Serving Palm Beach Shores, FL — Our Local Coverage Area
We’re based in the Palm Beach Shores area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Palm Beach Shores
Every 6 to 12 months, which is more frequent than inland where annual service is fine. Salt air in Palm Beach Shores corrodes hinges, operator internals, and electrical connections fast enough that a yearly check catches most problems before they become failures. Call (855) 360-5306 to schedule a tune-up.
316 stainless steel, full stop. Standard zinc or galvanized fasteners corrode within a season or two in Palm Beach Shores salt air. We replace every fastener we touch with 316 stainless and recommend the same for any new hardware on your gate.
Because lubricant doesn’t remove salt crust and aluminum oxide. In Palm Beach Shores, the hinge surface itself corrodes and expands, so the gate binds no matter how much spray you add. The fix is disassembling the hinge, cleaning the corrosion, and rebuilding with stainless hardware.
Yes. Florida building code requires working entrapment protection on automatic gates, and Palm Beach Shores properties with salt-damaged sensors are at real risk. We test and replace photocells and loop detectors as part of most automatic gate repairs here. Call (855) 360-5306 if your safety sensors have stopped working.
Sometimes. If saltwater got into the operator during a storm surge, the motor windings and control board are usually both damaged. We can sometimes save the unit with a board replacement and motor rebuild, but if the housing is severely corroded, a new operator with a properly sealed enclosure is the better long-term choice for Palm Beach Shores conditions. We’ll quote both options and you choose.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Palm Beach Shores and Singer Island with electric gate repair, opener replacement, and full-system service.
If your electric gate is acting up anywhere in Palm Beach Shores, from the condos near the inlet to the cottages along Lake Worth Lagoon, call (855) 360-5306 for a free estimate. We’ll tell you what’s wrong, what it costs to fix, and whether it’s worth repairing or replacing. No guesswork, no upsell, no pressure. Just a gate that works.