Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Pelican Bay
Electric gate repair in Pelican Bay usually means one of two things: a gate that won’t open, or a gate that won’t close when it’s supposed to. Both are urgent here, because nearly every barrier in this community guards a condominium tower’s parking garage, a staffed entry point, or a pool enclosure governed by the Pelican Bay Foundation or an individual condo board. We respond to Pelican Bay daily from Miami Gardens, and we know the access-control reality of this community before we ever roll up to the guard house. If your gate is down or acting erratically, call (855) 360-5306 and we’ll get a technician headed your way.
Why Archway Gate Repair Is Pelican Bay’s Preferred Electric Gate Repair Company
Pelican Bay residents and property managers call us because we already know what’s bolted to the ground in their community. The towers along the Gulf side, the low-rise villages off Tamiami Trail, the garage gates under the high-rises near Waterside Shops, the pool enclosures scattered through the CDD footprint. We service the brands already installed there, and that single fact changes how fast a repair gets diagnosed. No trial-and-error with an unfamiliar operator. No generic handyman guessing at a control board he’s never opened before.
Nelson Arrieta built Archway Gate Repair around gate work only. Not fencing. Not garage doors. Gates. When a Pelican Bay association needs an electric operator diagnosed, the technician who arrives has already worked on that brand’s failure points dozens of times. That’s why word moves through the condo boards and management offices here the way it does. The repair-first approach matters too. We don’t show up with a replacement quote pre-printed. We open the cabinet, test the board, check the loops, and tell you honestly what can be saved.
We carry parts for LiftMaster, FAAC, DoorKing, BFT, Linear, Viking, Ghost Controls, Elite, and Mighty Mule. For Pelican Bay specifically, that parts familiarity matters because so many installations here run legacy equipment. Discontinued boards. Operators installed in the 1990s. We know what has a retrofit path and what doesn’t, and we’re comfortable presenting that to a board or a management office that needs a clear answer before approving a work order.
Styles & brands we work with
Automatic Gate Repair in Pelican Bay
Automatic Gate Repair in Pelican Bay comes down to the operator, the control board, the safety devices, and the physical gate itself. In a community built mostly between the 1980s and 2000s, the automatic side of the system is usually where the age shows first. Boards fail. Loop detectors corrode. Safety photocells get caked in salt residue and stop seeing the beam. A typical automatic gate repair in Pelican Bay runs $180 to $480 depending on the component, and most board or sensor replacements are completed in a single visit.
Control Board Diagnostics and Retrofit
Older operators throughout Pelican Bay run control boards that are no longer manufactured. When one of those boards fails, the question isn’t always “can we find a used board” but “can we retrofit a current board that meets UL 325 entrapment-protection requirements.” We do that retrofit work regularly here, and we’ll tell you plainly when a board is worth retrofitting versus when the whole operator has reached the end of its useful life.
Safety Loop and Photocell Replacement
Salt-laden Gulf air attacks the low-voltage side of these systems hard. Photocell lenses fog and corrode. Loop detectors in drive aprons fail from moisture and ground movement. When your gate reverses or refuses to close, the safety system is usually the first suspect, and in Pelican Bay we replace these components before the operator itself ever becomes an issue.
Electric Gate Motor in Pelican Bay
Electric Gate Motor work in Pelican Bay means replacing or servicing the motor that swings or slides the barrier, whether it’s a tower parking garage gate, a pool enclosure, or one of the staffed entry arms at a village entrance. Motors here run hot and humid, and salt exposure shortens their life compared to inland installations. A typical electric gate motor replacement in Pelican Bay runs $600 to $1,800 depending on the gate size, motor type, and whether the control board can be reused. Most motor swaps on standard swing or slide gates are done same-day once the part is on the truck.
Motor Diagnostics Before Replacement
We test the motor’s windings, capacitor, and limit switches before we quote a replacement. That diagnostic step has saved Pelican Bay associations thousands by proving the motor was fine and the real fault was a seized hinge, a failed capacitor, or a board misreading the limit stop. Repair first, replace only when necessary.
Retrofit Motors for Legacy Operators
Some Pelican Bay gates still run motors that were discontinued a decade ago. Where the mounting pattern allows, we install current motors with matching torque and cycle ratings so the operator stays in service without replacing the entire chassis. We’ll tell you if that’s a practical option for your specific installation or if a full operator swap is genuinely the cheaper path.
Trusted Brands We Service in Pelican Bay
We work on the brand already on your property. Most electric gates in Pelican Bay run LiftMaster, FAAC, DoorKing, BFT, Linear, or Viking operators, with some Ghost Controls and Mighty Mule on newer residential or villa installations. We carry common boards, sensors, remotes, and loop detector parts for these brands, which means a Pelican Bay repair often happens in one trip rather than two. When a discontinued board can’t be sourced, we know which current board retrofits cleanly into that operator’s cabinet, and we stock those too.
Common Electric Gate Repair Problems We See in Pelican Bay Homes
- Corroded loop detectors in drive aprons. Gulf air and heavy summer rain shorten loop life fast. A failed loop is why your gate opens fine from the remote but won’t respond to a car pulling up.
- Sagging swing gates on original hinge posts. Gates hung in the 1980s to 2000s often sag at the post, not the panel. That drag stalls the operator and burns out motors. We correct the post, not just the panel.
- Obsolete control boards failing intermittently. Tower garage gates throughout Pelican Bay run boards that predate current safety standards. Intermittent trips and false reversals are often the board’s last symptoms before full failure.
- Photocells caked with salt residue. A fogged or corroded photocell makes a gate think something is always in the path. In Pelican Bay, this shows up constantly on pool enclosures and garage entries exposed to onshore wind.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Pelican Bay, FL
Here’s what Pelican Bay boards and residents typically pay. A keypad or remote control repair runs $80 to $150. Safety sensor or photocell replacement runs $120 to $250 per pair. A control board diagnostic and replacement runs $180 to $480 depending on whether the board is direct-fit or needs a retrofit kit. Electric gate motor replacement runs $600 to $1,800. Full operator replacement on a commercial-grade swing or slide gate can reach $3,500 to $7,000 on legacy systems where the entire chassis, board, and safety loops must be brought current. Every price is quoted and agreed before any work starts. Call (855) 360-5306 for a free estimate and a written number you can take to your board or management office.
We Also Serve Cities Near Pelican Bay
Our Electric Gate Repair crews cover the full Naples coast. We regularly service Naples Park, Island Walk, Naples, and Golden Gate. If your property sits just outside Pelican Bay’s gates, we’re already nearby. Learn more about our work throughout the area on our Pelican Bay page.
Serving Pelican Bay, FL — Our Local Coverage Area
We’re based in the Pelican Bay area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Pelican Bay
In most cases, an older operator can be retrofitted with a current control board and safety devices that meet UL 325 entrapment-protection requirements, keeping the original motor and chassis in service. The retrofit path works best on LiftMaster, FAAC, and DoorKing operators from the 1990s and 2000s that still have sound mechanical components. If the motor is also failing or the mounting is structurally compromised, replacement is often the cheaper long-term answer. Call (855) 360-5306 for an honest assessment of your specific operator.
Persistent tripping on a Pelican Bay tower garage gate usually means a failing loop detector in the drive apron, a control board that’s intermittently losing its logic, or a photocell that’s too corroded to hold a steady beam. Resetting clears the symptom for a few hours but doesn’t fix the component. We diagnose the actual fault rather than cycling the breaker again.
Yes, in most Pelican Bay installations the hinge post can be corrected by digging, resetting, and reinforcing the post footing, then re-hanging the gate leaf at the proper height. This is a common repair on 1980s to 2000s low-rise village gates where the original footing has settled. We do a sag correction before touching the motor, because a dragging gate will kill any operator you put on it.
We respond to Pelican Bay same-day for emergency gate failures, and most board-approved repairs are completed within 24 to 48 hours once diagnosis is done. Straightforward component swaps, like a loop detector or photocell, are usually finished the same visit. Bigger jobs, like an operator retrofit, get a written quote you can take to the board, and we schedule work around controlled access hours.
Yes. We work on legacy LiftMaster, FAAC, DoorKing, BFT, Linear, and Viking boards daily in Pelican Bay, and we keep retrofit kits for discontinued models that predate current safety standards. When a board cannot be sourced or safely retrofitted, we’ll tell you directly and give you a replacement option that fits the existing cabinet. Call (855) 360-5306 and describe your operator; we’ll know the system before we arrive.
Call Archway Gate Repair for Electric Gate Repair in Pelican Bay
If your Pelican Bay gate is down, intermittent, or stuck on manual, call (855) 360-5306 now. We’ll diagnose the real fault, give you a written price, and get the gate back on automatic access without disrupting controlled resident entry. Free estimates, upfront pricing, and a repair-first approach. Nelson Arrieta and the Archway team work the Naples coast every day, and we’re ready for your board’s vendor-approval process.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Pelican Bay and the Naples coast.