Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Pembroke Pines
Electric gate repair in Pembroke Pines usually runs $185 – $475 for most motor, board, and sensor jobs, with many repairs completed the same day. Our Electric Gate Repair team works throughout Pembroke Pines, including 33028 and 33082, and we carry parts for LiftMaster, Mighty Mule, Elite, and FAAC operators on our trucks. Call (855) 360-5306 for an exact quote. We tell you the price before any work begins.
Pembroke Pines gates fail in clusters. That’s the reality of a city built in phases, where whole streets of builder-grade operators reach end of life within the same year. Our techs know the housing stock here: Mediterranean stucco homes from the 1980s through 2000s, original aluminum slide gates, and swing operators that have been running in salt air since the Clinton years. When you call about a dead gate on your street in 33028, odds are we’ve already fixed gates on that same block.
Why Archway Gate Repair Is Pembroke Pines’s Preferred Electric Gate Repair Company
We work on the brand already on your property. That matters in Pembroke Pines, where entire phases of HOAs were built with the same LiftMaster or Mighty Mule swing operators. A technician who recognizes your operator model before pulling into the driveway is already halfway through the diagnosis. Diagnosed, not guessed.
We’re a gate-only specialist. No fencing side jobs, no garage doors, no “we do that too.” Every call we take in Pembroke Pines is a gate call, which means our techs have seen whatever failure you’re describing dozens of times before. From the motor to the hinge, electric gate repair is our core trade, not an add-on.
Nelson Arrieta leads the team, and his approach is repair first, replace only when necessary. If a control board can be rebuilt or a hinge re-fitted, we’ll do that before quoting a full replacement. HOA boards in Pembroke Pines appreciate that, because fleet-wide replacements get expensive fast when every gate on the street is failing at once.
Styles & brands we work with
Gate Access Control in Pembroke Pines
Gate Access Control in Pembroke Pines means more than keypads and remotes. It’s the full system that decides who gets in: keypads, telephone entry systems, remote controls, loop detectors, safety sensors, and the wiring that ties them all to the operator board. In Pembroke Pines, access control work often happens at HOA scale. When an entire gated community off Pine Island Road shares an entry arm, that system has to work consistently for hundreds of residents, every single day.
For a single-family home in 33028, a typical keypad replacement or remote programming job runs $120 – $260. Adding a telephone entry or intercom system to a small HOA gate usually lands between $650 and $1,400 depending on wiring condition and how many remotes or codes need to be programmed. We quote the full number up front.
Keypad and Remote Synchronization
We regularly re-sync keypad codes and remote signals across multiple homes in the same Pembroke Pines subdivision. When a builder installs the same operator in every house, the access codes often share a format, which makes fleet-wide reprogramming faster and cheaper than starting from scratch.
Loop Detector and Safety Sensor Repair
Loop detectors buried under the driveway are the first thing South Florida lightning takes out. We replace failed loops and re-calibrate safety photocells so the gate doesn’t reverse for no reason or, worse, fail to reverse when it should.
Commercial Gate Operator in Pembroke Pines
Commercial Gate Operator service in Pembroke Pines covers the heavier equipment that runs community entry arms, apartment complex gates, and commercial property entrances. These aren’t residential swing arms. They’re continuous-duty operators that cycle hundreds of times a day, which means the motor, gear train, and control panel wear differently than a home gate.
In Pembroke Pines, commercial gate operator work is usually an HOA or property management matter. A typical commercial operator repair runs $350 – $850 depending on whether it’s a board, motor, or full operator replacement. Full replacement of a slide gate operator at a community entrance usually lands between $1,800 and $3,400 installed. We provide written quotes that HOAs and CDDs can review at board level before any work starts.
Fleet-Wide Operator Service for HOAs
When one commercial operator fails in a community, the board usually wants us to inspect the others. That’s smart. Salt air and lightning don’t single out one gate. We walk the whole property, tag which operators are near end of life, and give the board a prioritized repair plan.
Access-Control Integration
We connect commercial operators to existing keypad, telephone entry, and transponder systems. If the operator needs to talk to a newer access control panel, we handle the low-voltage wiring and programming too. One vendor for the whole gate system.
Trusted Brands We Service in Pembroke Pines
We’re factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Pembroke Pines specifically, we keep common control boards, loop detectors, safety sensor sets, and remote transmitters in local stock so most repair calls don’t wait on a two-week parts shipment. If your HOA manages a LiftMaster-heavy community off Sheridan Street, or a Mighty Mule swing gate in a 33082 subdivision, we already know the failure points and the part numbers.
Common Electric Gate Repair Problems We See in Pembroke Pines Homes
- Corroded control boards from salt air. Near-coastal Broward humidity and salt-laden air work on operator boards and low-voltage connections constantly. Intermittent failures and false safety trips are the usual symptoms, and the fix is usually a board replacement plus re-sealed wiring connections.
- Lightning surge damage to loop detectors and panels. Summer thunderstorms roll through Pembroke Pines almost daily from June through September. Surges travel through buried loop wires and fry the detector or the access control panel, sometimes across several gates in the same phase at once.
- Sagging original gates and corroded hinge posts. Aluminum slide gates and swing operators installed in the 1980s and 1990s are now 25 to 40 years old. The gate itself is usually fine, but the hinge posts, mounting plates, and footings have corroded to the point where the gate sags and drags or won’t close fully.
- Age-related failure waves across the same street. Because Pembroke Pines subdivisions were built in phases by single builders, identical gates fail on the same timeline. One month it’s a board on one house, the next month the same board fails three doors down. HOAs often ask us to service the whole street at once.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Pembroke Pines, FL
Here’s what Pembroke Pines homeowners can expect to pay, based on the work we actually see in this market:
- Gate motor repair: $190 – $420
- Control board replacement: $225 – $510
- Safety sensor or loop detector replacement: $140 – $330
- Keypad or remote programming: $120 – $260
- Hinge and post reinforcement for a sagging gate: $280 – $700
- Full gate operator replacement (residential swing or slide): $1,100 – $2,900
These ranges reflect both parts and labor. What moves a job to the higher end: weather-sealed boards, stainless steel hinges instead of the original galvanized hardware, and post-footing reinforcement instead of a simple hinge swap. We give every customer a written quote before work starts, and the number we quote is the number on the invoice. Call (855) 360-5306 for a free estimate.
We Also Serve Cities Near Pembroke Pines
Our Pembroke Pines service area also reaches Cooper City, Pine Island Ridge, Hollywood, and Andover. If your gate is down and you’re just outside Pembroke Pines, call (855) 360-5306 and we’ll confirm coverage for your address.
Serving Pembroke Pines, FL — Our Local Coverage Area
We’re based in the Pembroke Pines area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Pembroke Pines
Because Pembroke Pines was built in large phases by single builders, hundreds of homes in the same subdivision received identical gate operators installed within months of each other. Those operators share the same design, the same components, and the same 15 to 25 year service life, so they reach end of life as a group. That’s why one failed LiftMaster board in 33028 often predicts the same failure a few doors down. We stock replacement parts for these exact operators so we can service whole streets efficiently. Call (855) 360-5306 if your HOA wants a fleet-wide assessment.
Salt-laden air from nearby coastal Broward accelerates corrosion on operator control boards, low-voltage wiring connectors, hinge posts, and mounting plates, so electrical components that might last 15 years inland can fail in 8 to 10 years here. Galvanized steel hardware rusts through, and unprotected boards develop intermittent faults. The fix is not just replacing the failed part, it’s upgrading to stainless steel fixings and properly sealed enclosures. That’s what actually lasts on the coast. We quote both options so you can decide.
Yes. Fleet-wide gate work is a recurring pattern in Pembroke Pines because whole phases of gated communities were built with the same operators and the same access control systems. We inspect every gate in the community, document what’s failed and what’s nearing failure, and provide the HOA board with a written repair plan they can approve. We also sync keypad codes, remotes, and access protocols across all gates so residents keep consistent entry. Call (855) 360-5306 and ask for a community gate assessment.
Stop running the operator and call a gate specialist. A sagging gate usually means the hinge posts or mounting footings have shifted or corroded, and the operator will keep forcing the gate until the motor, gear train, or both fail. In Pembroke Pines, where summer storms and salt air are constant, we often see post-footing corrosion that requires concrete reinforcement, not just hinge tightening. We’ll assess the footing, re-set or reinforce the post, and re-align the gate so the operator isn’t fighting the weight. That’s the repair that lasts.
UL 325 is the federal safety standard that requires automatic gates to have working entrapment protection, including safety sensors or contact edges that stop and reverse the gate when something blocks its path. Many original Pembroke Pines gates from the 1980s and 1990s were installed before current UL 325 requirements and have outdated or non-functional safety systems. We check every gate we service for compliance and will quote any sensor, edge, or control board updates needed. Call (855) 360-5306 to schedule a safety inspection along with your repair.
Get Your Gate Fixed in Pembroke Pines Today
A dead gate in Pembroke Pines is a security problem and a daily aggravation. Whether it’s a corroded control board, a lightning-fried loop detector, or a sagging gate that won’t close, we’ll diagnose it correctly and fix it without upselling you a replacement you don’t need. Call (855) 360-5306 for a free estimate, and we’ll tell you the exact quote before any work begins.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Pembroke Pines and surrounding Broward County communities.