Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Satellite Beach
Electric gate repair in Satellite Beach runs $180 to $340 for most service calls, and we can typically have a technician to your property the same day. If you live on the barrier island between the Atlantic and the Banana River, you already know that salt air punishes exterior hardware faster here than anywhere else in Brevard County. Our team works on the brand already on your property, including Ghost Controls in Satellite Beach, and we carry parts for the operators most common along A1A and the numbered streets running east to the beach. Call (855) 360-5306 for a free estimate on any gate problem, from a dead opener to a sagging hinge post.
We’re a gate-only repair company, not a general handyman service that sidelines in gates. That matters in Satellite Beach because the failure patterns here are specific: salt-seized opener arms, corroded control boards, and post footings loosened by hurricane wind loads. We diagnose those problems quickly because we’ve seen them on hundreds of beachside gates. Electric Gate Repair is what we do every day, and we treat each Satellite Beach property as its own corrosion timeline, not a generic fix.
Why Archway Gate Repair Is Satellite Beach’s Preferred Electric Gate Repair Company
When a gate stops opening on a Satellite Beach morning, you need a technician who already knows what salt corrosion does to a LiftMaster arm or a FAAC control board. That’s us. We service the full stretch of the island, from the condos near Pelican Beach Park to the mid-century homes tucked off DeSoto Parkway, and we’ve built our reputation on diagnosing the actual failure, not guessing at it.
Customers around 32937 call us because we recognize their operator’s failure points before we arrive. The ocean-side streets off A1A see operator arms seize within a few years, and the older gates along the Banana River side have their own issues with humidity and rusted hinges. Our response time to Satellite Beach is same-day in most cases, and we quote every repair before work begins. No surprises on the invoice.
Led by Nelson Arrieta, our technicians carry a working knowledge of nine major gate brands. When a Satellite Beach homeowner says “my gate just stopped,” we ask what brand it is, and we usually know the answer’s likely failure before the truck leaves the shop. That’s the difference between Satellite Beach experience and a tech who’s seeing salt corrosion for the first time.
Styles & brands we work with
Automatic Gate Repair in Satellite Beach
Automatic gate repair in Satellite Beach means fixing the full system: the operator arm, the control board, the safety sensors, and the physical gate itself. Most jobs run between $220 and $480 depending on whether we’re replacing a corroded arm, rewiring a control board, or re-anchoring a post. On this barrier island, the automatic part of the gate usually fails because the mechanical part seized first, and that’s where we start.
If your automatic gate opens partway and stops, or the motor hums but nothing moves, you’re likely dealing with a salt-seized hinge or a dead capacitor. In Satellite Beach, we see this on gates that are only four or five years old. The motor is often fine. The arm it’s fighting is not. We fix the mechanical bind before we touch the electronics, because replacing the operator without freeing the gate just burns out the new motor.
Safety Sensor and Entrapment Protection
Older automatic gates in Satellite Beach often predate modern UL 325 safety requirements. That means no working photo-eyes, no reversing edge, and no actual entrapment protection. We retrofit legacy systems with current sensors so the gate stops and reverses when a child or pet crosses the path. If the control board is too old to accept a retrofit, we’ll tell you honestly and quote a replacement operator instead.
Storm-Ready Re-Anchoring
After hurricane season, many automatic gates on the ocean side of A1A need their posts re-anchored. Wind loads plus salt-pitted footings leave posts loose enough to sag under the gate’s own weight. We re-pour footings with hot-dip galvanized hardware and set the gate to swing true before testing the operator’s limits again.
Electric Gate Motor in Satellite Beach
Electric gate motor replacement in Satellite Beach typically costs $350 to $700 for residential swing and slide gates, depending on the brand and whether we’re swapping in a LiftMaster, FAAC, or Linear unit. The motor is often the last thing to fail on a beachside gate. Salt corrosion kills the arm, the bracket, and the board first. When the motor itself is done, we replace it with a unit rated for coastal exposure and set the torque limits correctly.
The symptom that usually points to a motor problem in Satellite Beach is a gate that runs fine, then slows down, then stops mid-cycle. If the capacitor is swollen or the windings are shorted, the motor is finished. We bench-test the old unit before recommending replacement, because we believe in repair first. A $35 capacitor is a better fix than a $600 motor swap, and we’ll never sell you the bigger job if the small one solves it.
Capacitor and Wiring Diagnosis
Salt air gets into wiring connections too. In Satellite Beach, we regularly find corroded terminal blocks and green-tinted wire ends inside operator housings that look clean from outside. We trace the low-voltage path from the board to the motor before we condemn either one. That saves you from replacing a motor that was only getting nine volts instead of twenty-four.
Motor Replacement Standards
When replacement is the right call, we install motors with sealed housings and stainless hardware. The goal is a gate that still works after the next named storm, not one that needs another motor in three years. We set the open and close limits on site, test the safety reversal, and leave the gate running at the speed the manufacturer intended.
Trusted Brands We Service in Satellite Beach
We work on your existing equipment before we talk about replacing it. That includes LiftMaster operators on swing gates near the beach, FAAC units on low-rise condo access gates along A1A, BFT slide motors on commercial properties, and Linear openers on older residential systems. We keep common boards, capacitors, remote receivers, and photo-eyes stocked for fast turnaround in Satellite Beach, so a repair call usually ends the same day. If your operator is one we don’t see every week, we’ll still diagnose it honestly and order the right part rather than forcing a universal replacement. Diagnosed, not guessed.
Common Electric Gate Repair Problems We See in Satellite Beach Homes
- Salt-seized opener arms on ocean-side gates. The arm corrodes solid, the motor strains, and the board burns out trying to move it. We free or replace the arm before the operator takes more damage.
- Legacy control boards with no entrapment protection. Pre-UL 325 boards have no reversing logic and no parts available. We explain retrofit options, and if the board won’t support them, we quote a modern replacement.
- Sagging gates from rotted or storm-loosened post footings. The hinge post leans, the gate drags on the latch side, and the motor works twice as hard as it should. We re-anchor the post and re-hang the gate before adjusting the operator.
- Corroded wiring and terminal blocks inside operator housings. Even inland-style installations on A1A-side properties show green corrosion inside the electrical box within a few years. We clean, re-terminate, and seal the connections to stop intermittent failures.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Satellite Beach, FL
Here are the ranges we quote for Satellite Beach work:
- Service call and diagnosis: $80 – $120, credited toward the repair if we do the work same day.
- Opener arm replacement: $180 – $320, depending on the operator brand and arm type.
- Control board replacement or retrofit: $250 – $550, including programming and sensor integration.
- Electric gate motor replacement: $350 – $700, including removal, install, and limit/force setup.
- Post re-anchoring with galvanized hardware: $280 – $600 per post, depending on footing depth and access.
Every price is quoted and agreed before we start. Free estimates, upfront pricing, and a workmanship warranty on parts we install. Call (855) 360-5306 and we’ll give you an exact number, not a vague range.
We Also Serve Cities Near Satellite Beach
Archway Gate Repair covers the whole central Brevard coast. If you’re in Electric Gate Repair in Satellite Beach, we’re local to you. We also run calls to South Patrick Shores, Indian Harbour Beach, Indialantic, and Viera West. The same salt-air and storm-load experience applies wherever you are on the barrier or just across the causeway.
Serving Satellite Beach, FL — Our Local Coverage Area
We’re based in the Satellite Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Satellite Beach
The arm seizes first. Salt corrosion binds the arm at the pivot point, the motor stalls against it, and the board either trips or burns out. We free or replace the arm before we evaluate the motor and board, which saves you from replacing a motor that was never the problem. Call (855) 360-5306 and we’ll diagnose it on site.
Most older LiftMaster, FAAC, and Linear operators can accept aftermarket photo-eyes and a reversing edge if the control board supports auxiliary inputs. Some legacy boards cannot. We’ll test yours and tell you straight whether a retrofit makes sense or a new operator costs less than fighting an obsolete board. Estimates are free.
In Satellite Beach, it’s usually the post. Salt-pitted footings and hurricane wind loads loosen hinge posts over time, and the gate leans under its own weight. We re-anchor the post with galvanized hardware and then adjust the operator, because fixing the panel without fixing the post just moves the problem six months down the road.
If the gate leans, scrapes the ground, or the post has visible movement when you pull on it, yes. Wind loads on a barrier island are different from inland Brevard. We inspect the footings, the hinges, and the operator bracket after every storm and re-anchor anything that moved. Call us before the next system forms, not after it passes.
Yes. We service legacy LiftMaster swing arms, FAAC hydraulic and electromechanical units, and Linear slide operators on Satellite Beach properties. If parts are still available, we fix them. If the board is obsolete and the safety protection can’t be brought current, we’ll quote a modern replacement honestly. Call (855) 360-5306 for a free repair estimate.
Contact Archway Gate Repair in Satellite Beach
If your gate is down, erratic, or just struggling with the salt air, call (855) 360-5306. We’ll get a technician to your Satellite Beach property, diagnose the real problem, and quote the repair before any work begins. Free estimates, licensed and insured, and we stand behind every part we install. From the motor to the hinge, we fix the whole gate.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Satellite Beach, FL.