Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Sewall’s Point
Electric gate repair in Sewall’s Point usually costs between $225 and $640 depending on the component, and most jobs we handle on the peninsula are completed in a single visit. The salt air off the Indian River and St. Lucie Inlet is the biggest factor in gate failure here, not mechanical wear, so if your gate has stopped responding, started sagging, or begun opening on its own, the problem is likely corrosion or storm damage. Call (855) 360-5306 and we’ll send a gate technician who already knows what Sewall’s Point waterfront estates do to gate hardware.
We work across all of 34996, from Sewall’s Point Road to the inlet side, and we’re familiar with the custom ornamental iron and aluminum entry gates that define this peninsula. Archway Gate Repair is a gate-only specialist, and we cover electric gate repair as a core specialty, not a side service.
Key Takeaways
- Salt-air corrosion is the leading cause of gate failure in Sewall’s Point, ahead of ordinary wear.
- Most electric gate repairs here run $225 – $640, quoted and agreed before work begins.
- We service LiftMaster, FAAC, BFT, and Linear operators already installed on Sewall’s Point properties.
- Same-day and emergency service is available for failed gates and storm damage.
- Written estimates are free. Call (855) 360-5306.
Why Archway Gate Repair Is Sewall’s Point’s Preferred Electric Gate Repair Company
Sewall’s Point homeowners and property managers call us because we recognize the gate brand on their property before we even pull into the driveway. Our Electric Gate Repair team works on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so the diagnosis starts the moment we know the manufacturer. On an island where most gates are custom-fabricated and electrically operated, that brand familiarity saves real time and real money on labor.
We also understand what this specific barrier island does to gate hardware. Sewall’s Point is built out; the peninsula is essentially fully developed, which means most operators and control boards in service have been through multiple hurricane seasons. When we arrive at a waterfront estate, we’re already looking for the corrosion and storm-stress failures that inland Martin County technicians rarely see. That’s the difference between a repair that holds and one that needs another call in eight weeks.
Every estimate is free, and the price you approve before the work starts is the price you pay. Led by Nelson Arrieta, Archway Gate Repair is insured, bonded, and focused entirely on gates: nothing else, no sideline trades. For Electric Gate Repair in Sewall’s Point, that means one phone call reaches a specialist, not a dispatcher who then tries to route a general handyman to your property.
Styles & brands we work with
Gate Opener Repair in Sewall’s Point
Gate opener repair in Sewall’s Point typically runs $250 – $550, and the repair usually means addressing what marine air has done to the motor, control board, or wiring rather than replacing a mechanically worn part. A Sewall’s Point homeowner calls us when the gate hums without moving, opens halfway and reverses, or stops responding to the remote and keypad entirely. On this peninsula, that’s very often a corroded connection or a board that’s been slowly failing from salt-air intrusion.
Control Board Diagnostics and Replacement
Control boards on waterfront properties here fail from moisture and corrosion far earlier than their rated lifespan suggests. We bench-test the board, confirm the failure source, and replace it with a board matched to your operator’s brand and model, which avoids the parts guesswork that drives up labor time on unfamiliar systems.
Wiring and Limit Switch Work
Salt-laden air works its way into connection points and limit switch housings on Sewall’s Point gates, creating intermittent problems that can be maddening to diagnose. Our crew traces the wiring, cleans or replaces compromised connections, and sets the open and close limits so the gate travels fully without slamming into its stops.
Automatic Gate Repair in Sewall’s Point
Automatic gate repair in Sewall’s Point spans everything from the operator arm to the safety photocells, and prices typically land between $225 and $640 depending on what has actually failed. If your automatic entry gate is drifting open at odd hours, failing to close completely, or refusing to respond to the car exit loop, that’s an automation fault, not just a mechanical one. On this island, storm-driven moisture is frequently the culprit.
Safety Sensor and Loop Detector Service
UL 325 compliance matters on every automatic gate, and safety photocells or vehicle loop detectors that have taken on water will disable entrapment protection. We test both, dry out or replace damaged components, and confirm the gate reverses on obstruction before we leave. This is the kind of work we treat as a safety repair, not an upsell.
Manual Release and Post-Storm Recovery
After a storm, many Sewall’s Point gates need the manual release disengaged so the gate can swing free, then re-engaged once the operator is restored. We handle that sequence carefully, including any realignment a wind-stressed gate requires after the fact, so the automatic operation comes back clean instead of grinding against a shifted post.
Trusted Brands We Service in Sewall’s Point
We work on the brand already on your property. That means LiftMaster, FAAC, BFT, and Linear operators, plus the other five major brands our technicians are factory-familiar with. Archway Gate Repair keeps common replacement boards, limit switches, photocells, and remote receivers ready to go, so many Sewall’s Point repairs are finished the same day without waiting on a parts truck from a distributor. Diagnosed, not guessed: when we roll up to a custom estate gate off Sewall’s Point Road, we already know where that brand tends to fail under salt-air conditions and what it takes to bring it back.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Sewall’s Point Homes
- Corroded control boards. Onshore salt air infiltrates the board housing and eats the circuitry from the outside in, causing intermittent dead keys and random gate reversals that mechanical checks can’t explain.
- Sagging swing gates after storms. Hurricane-season wind loads stress solid infill gates, and saturated barrier-island soil lets hinge-post footings shift, leaving the gate dragging or failing to latch.
- Dead keypads and remotes. Keypad contacts and receiver antennas exposed to marine moisture fail by corrosion long before the plastic housings show wear, which is why we always inspect both when the gate stops answering.
- Disabled safety photocells. Storm-driven water gets into the photocell eyes and loop-detector housings, tripping the obstruction system and leaving the gate stuck open or closed. This is a safety system failure, not just an inconvenience.
Pricing for Electric Gate Repair in Sewall’s Point, FL
Here’s what we see on Sewall’s Point jobs, so you can plan the cost before you call:
- Gate opener repair (motor, limiter, basic wiring): $250 – $550
- Control board replacement (cluding the board): $350 – $640
- Safety photocell or loop detector repair: $150 – $300
- Hinge-post reset and gate realignment: $300 – $700, depending on footing work and gate weight
- Full diagnostic service call (applied to any repair we do): $79
Every quote is written and agreed before any work starts. If you need emergency repair after a storm, call (855) 360-5306 and we’ll give you a straight price once we see the failure. Estimates are free, and there’s no charge for the diagnostic if we complete the repair.
We Also Serve Cities Near Sewall’s Point
Our crew regularly crosses the bridges to Stuart and North River Shores, and we cover Jensen Beach and Hutchinson Island South as well. If you manage a property in any of those areas, you get the same gate-only focus and the same brand-familiar approach we bring to Sewall’s Point.
Serving Sewall’s Point, FL — Our Local Coverage Area
We’re based in the Sewall’s Point area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Sewall’s Point
Sewall’s Point sits between the Indian River and the St. Lucie Inlet, and the constant onshore salt-laden air penetrates operator housings, circuit boards, and keypad contacts at a rate inland Martin County properties simply don’t experience. Corrosion reaches the board and wiring long before gears and motors show meaningful mechanical wear. If your gate is acting erratically, call (855) 360-5306 and mention the symptoms; we’ll bring the right diagnostic equipment and the brand-specific parts we’re likely to need.
Most automatic gate operators have a manual release handle or key located on the operator itself, usually near the motor housing; releasing it disconnects the gate from the drive and lets you swing or slide it by hand. If it’s a swing gate, move it slowly and watch for drag at the latch and hinges, because a wind-stressed gate can bind. If you’re not sure where the release is on your particular operator, call us before forcing anything; a trained technician can talk you through it or come handle the release and the re-engagement when power returns.
A sagging gate on Sewall’s Point usually means the hinge-post footing has shifted in saturated barrier-island soil, not that the gate leaf itself bent. Wind loads press against the gate, the footing loses its grip in soggy ground, and the post leans enough to pull the gate out of its original arc. We reset the footing, re-anchor with storm-rated hardware, and realign the hinges so the gate travels cleanly. This is seasonal work on this peninsula, and it’s one of the repairs we quote before starting and complete in a single visit when possible.
If your gate is a solid infill panel, a heavy ornamental iron design, or a custom aluminum entry wider than a standard driveway, yes; wind-rated anchoring matters on this barrier island. Solid gates catch hurricane wind like a sail, and the force goes straight into the hinge posts and footings. We inspect post depth, bracket condition, and the gate’s current clearance during any repair, and we’ll tell you if the anchoring needs upgrading before the next storm season.
Stand clear of the gate path and press the remote to close the gate; if the gate reverses before reaching the close limit, the photocell or loop detector may be misaligned, blocked, or water-damaged. If the gate closes normally but you’re not certain the obstruction system is armed, the only reliable way to know is with a proper test using the manufacturer’s diagnostic mode or a metered check at the board. We perform that test on every automatic gate repair in Sewall’s Point, because a gate without working entrapment protection is out of code and unsafe.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Sewall’s Point and Martin County with gate repair, electric gate repair, and gate installation.