Farm & ranch
Wrought iron
Wood & steel frame
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Southwest Ranches
Electric gate repair in Southwest Ranches usually costs $180 – $640 depending on whether it’s a control board, motor, or sensor issue, and most repairs are completed the same day we arrive. Our Electric Gate Repair team knows exactly what these properties throw at a gate system: humidity, shell-rock dust, solar power quirks, and wildlife that loves tripping photo-eyes. If your gate is stuck open, stuck closed, or reversing for no reason, call us at (855) 360-5306. We’ll get it diagnosed and back online before it becomes a bigger problem.
We work throughout Southwest Ranches, from Griffin Road to Stirling Road and every multi-acre estate in between. Nelson Arrieta and our crew have been fixing gates in this market long enough to know that a ranch entrance gate here isn’t a nice-to-have. It’s the boundary between your horses, your family, and a rural road with no sidewalk.
Why Archway Gate Repair Is Southwest Ranches’s Preferred Electric Gate Repair Company
Southwest Ranches property owners tend to research before they hire. We respect that. When we pull up to a home off Volunteer Road or Hancock Road, we already know what kind of gate system we’re likely to find: a heavy slide operator on a long shell-rock drive, an older swing gate hanging off a post that’s taken years of hurricane wind, or a ranch entrance that hasn’t had its photo-eyes aligned since the last armadillo family moved through. Diagnosed, not guessed.
Local homeowners and barn managers call us because we work on the brand already on their property. LiftMaster, FAAC, Elite, Mighty Mule, DoorKing, BFT, Linear, Viking, Ghost Controls. If it opens your gate, one of our techs has likely opened it on a service bench before. We don’t send a general handyman who’s watching a YouTube video in your driveway. We show up with the right board, the right motor, and the right sensors in the van.
Response time to Southwest Ranches is typically same-day for emergencies and within 24 hours for non-urgent repairs. Gates this far out often mean the only way in is the gate itself. When it fails, we treat it as the access emergency it is. Nelson Arrieta built Archway Gate Repair around exactly this problem: rural residential and equestrian gates that can’t wait three days for a callback.
Styles & brands we work with





Electric Gate Motor in Southwest Ranches
Electric gate motor repair in Southwest Ranches most often means diagnosing a motor that runs but can’t move the gate, draws too much current from a solar or low-voltage setup, or burns out capacitors after years of South Florida humidity doing its worst to the windings. Motor issues here are common because ranch gates are heavy. A 14-foot iron gate on a gravel track puts constant strain on the operator, and when the post shifts a quarter inch, that strain doubles. A typical electric gate motor repair in Southwest Ranches runs $260 – $640, depending on whether the motor can be rebuilt or needs replacing.
When the Motor Runs But the Gate Won’t Move
This failure pattern usually points to a stripped gear inside the operator, a broken drive chain on a slide gate, or a capacitor that’s given up. We test the motor’s amp draw on site. If it’s pulling too much current, we know something mechanical is binding before we ever open the housing. On Southwest Ranches properties with long, unpaved driveways, that binding is often a wheel assembly packed with shell-rock dust or a track that’s shifted out of alignment after heavy rain.
Solar and Low-Voltage Motor Draw Problems
Plenty of gates in Southwest Ranches run on solar because running conduit a quarter mile down a driveway isn’t practical. The catch: older AC motors retrofitted to solar draw more than the panels and batteries can sustain. After a few cloudy days, the gate won’t open at all. The fix is usually a modern low-voltage DC motor matched to the solar array. Motor replacement cost typically falls in the $400 – $600 range for these systems, and we quote it before any work starts.
Gate Access Control in Southwest Ranches
Gate access control in Southwest Ranches covers the control board, keypad, telephone entry system, remote receivers, and any external interlocks that tell the gate when to open and close. On rural properties, the access control system often gets more abuse than the gate itself: direct sun on the keypad, humidity corroding the board terminals, and the occasional armadillo that digs under the sensor loop. A board repair or replacement in Southwest Ranches runs $180 – $420. Keypad replacement is typically $90 – $220.
Control Board Failure From Humidity and Power Surges
Control boards on legacy operators don’t die quietly. They give false obstruction warnings, forget their limit settings, or stop responding to remotes entirely. In Southwest Ranches, where summer thunderstorms knock out power routinely, we see boards fried by surges more than any other single failure. Replacing the board with a modern low-voltage compatible unit is usually the right path, and it’s a repair measured in hours, not days.
Adding Keypad Entry or Smartphone Access to an Existing Gate
We can add a wireless keypad or a smartphone bridge to most existing electric gate systems in Southwest Ranches, including older LiftMaster and Elite operators. Homeowners often want this so barn staff, trainers, or delivery drivers can get in without a remote. For a ranch property with multiple gates, it’s worth tying them into one access control system so a single code opens both the main entrance and the paddock gate. Is it a DIY project? Not one we’d recommend on a gate. A trained professional should handle the wiring and safety sensor integration. High-tension gate hardware and electrical wiring carry real injury risk.
Trusted Brands We Service in Southwest Ranches
We’re factory-familiar with nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Southwest Ranches residents, that means two things. First, we know your system’s failure points before we arrive. A LiftMaster slide gate from the 1990s has a different weak spot than a Ghost Controls residential opener from 2018, and we don’t need a trial-and-error session to figure it out. Second, we keep common replacement boards, sensors, and remotes in the van, so you’re not waiting on a parts shipment from a distributor in Orlando. Repair first, replace only when necessary.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Southwest Ranches Homes
These are the calls we take most often in the Southwest Ranches area, and they’re shaped by the land itself: shell-rock driveways, equestrian traffic, older custom builds, and South Florida weather.
- Obsolete control boards on legacy operators. Homes built in the 1980s and 1990s often still run original boards that fail from humidity and power fluctuations. The gate gets stuck open or closed at the worst possible time, like when the farrier is waiting at the entrance.
- Worn hinge posts and sagging swing gates. On long driveways, the post usually fails before the panel does. A shifted post misaligns the gate, which strains the operator, which then burns out the motor. We fix the post first, then the operator.
- Photo-eyes tripped by armadillos and raccoons. This is genuinely a Southwest Ranches problem. Wildlife crosses the gate path constantly, and if the photo-eye isn’t mounted and aligned correctly, the gate reverses or refuses to close. We set the sensors at the right height and angle for local conditions.
- Solar-powered openers that can’t keep up. Southwest Ranches has a lot of solar-powered gate systems because running power to a remote entrance is expensive. After a few overcast days, an undersized system leaves the gate dead. We size the panels and batteries to the actual motor draw.
Pricing for Electric Gate Repair in Southwest Ranches, FL
Here’s what you should expect to pay in this market:
- Diagnostic and travel to Southwest Ranches: $75 – $125
- Control board replacement: $180 – $420
- Electric gate motor repair or replacement: $260 – $640
- Photo-eye sensor replacement and alignment: $90 – $180
- Remote control programming or replacement: $60 – $150
- Keypad replacement: $90 – $220
What moves the price: the age of your operator, whether the board is still manufactured, and whether the motor needs a full replacement. Every job is priced and agreed before any work starts. No gate is ever opened up and fixed without you knowing the number first. Call (855) 360-5306 for a free estimate, and we’ll walk you through exactly what your system needs. From the motor to the hinge.
We Also Serve Cities Near Southwest Ranches
Archway Gate Repair covers Southwest Ranches and the surrounding communities, including Sunshine Ranches, Cooper City, Pine Island Ridge, and Pembroke Pines. Some of those areas have different gate setups entirely, more suburban and pedestrian-facing, but the service standard doesn’t change: diagnose, quote, fix. If you’re just outside Southwest Ranches, call and ask if we cover your street.
Serving Southwest Ranches, FL — Our Local Coverage Area
We’re based in the Southwest Ranches area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Southwest Ranches
Yes, in most cases you can retrofit a safety photocell system and a new control board while keeping the original motor, as long as the motor itself is still mechanically sound. That’s a common repair on older LiftMaster and Elite operators in Southwest Ranches, where gates were hung before modern UL 325 safety standards existed. We’ll assess the motor’s amp draw before we recommend anything. The retrofit typically costs $180 – $420, and it prevents you from having to spend thousands on a full replacement. Call (855) 360-5306 for a free estimate.
Nine times out of ten, that’s a photo-eye alignment problem or a false obstruction signal from the safety loop. In Southwest Ranches, armadillos and raccoons are common culprits, but so is shell-rock dust coating the sensor lenses. Another possibility on older systems is a control board that’s lost its force settings. A repair like this usually runs $90 – $220. Call us at (855) 360-5306 and describe what the gate does, and we’ll likely know the cause before we arrive.
If the solar panel and batteries are more than 5 years old, replacing them is often the smarter move, and that runs $300 – $600 including labor. But if the panel is recent and the batteries are healthy, the problem is usually the motor drawing too much current for the solar array. In that case, we swap in a low-voltage compatible motor and you keep your existing operator housing and hardware. We’ll test the whole system before recommending either path. Estimates are free: call (855) 360-5306.
A control board repair or replacement in Southwest Ranches typically runs $180 – $420. The variable is the brand and age of your specific operator. Older DoorKing and LiftMaster boards are less expensive than some newer FAAC or BFT boards, and some are simply no longer manufactured, which means a retrofit board. We’ll give you the exact number before we touch anything. Call (855) 360-5306 for a quote.
Yes. We add wireless keypads and smartphone bridges to most existing electric gate setups in Southwest Ranches, including LiftMaster, Elite, and Mighty Mule systems. This is a popular upgrade for horse properties where trainers, barn workers, or feed deliveries need access without a remote. The job typically runs $90 – $220 for a keypad or $200 – $350 for smartphone access, depending on your control board’s compatibility. We’ll quote it before any work begins. Call (855) 360-5306 and tell us what system you have.
We recently serviced a 1990s-era LiftMaster slide gate on a shell-rock driveway off Griffin Road where the original control board had failed after years of humidity and power surges. The homeowner’s solar setup couldn’t handle the outdated operator’s draw, so we replaced the board with a modern low-voltage compatible unit and added a safety photocell to meet UL 325. The gate now runs reliably even during extended power outages, and the homeowner avoids the cost of a full operator replacement.
If your gate is acting up, failing to open, or showing signs of age, call (855) 360-5306 for a free estimate. We’ll send a gate specialist, not a generalist.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Southwest Ranches and surrounding communities.