Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Sunrise
Electric gate repair in Sunrise typically runs $280 – $650 for motor and control board work, and most opener failures we see are diagnosed and fixed in a single visit. If your gate is stuck open, stuck closed, or reversing when it shouldn’t, call us at (855) 360-5306. We work on the brand already on your property, and we know the Sunrise HOA approval reality before we even pull up to the gate.
Sunrise is different from most of South Florida. The housing stock here, from Sunrise Lakes to the master-planned villas off Nob Hill Road, is overwhelmingly HOA-governed. That means a gate repair is rarely just a service call. It’s an approval sequence, a board meeting, a management-company work order, and then the actual mechanical fix. Our Electric Gate Repair team has handled enough of these that we sequence the job around the approval, not the other way around.
Why Archway Gate Repair Is Sunrise’s Preferred Electric Gate Repair Company
We’re a gate-only specialist. That’s the whole company. We don’t do fencing, we don’t do garage doors, and we don’t send a general handyman to guess at your opener. Every technician who shows up in Sunrise carries hands-on training across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. When a Sunrise on the Green manager describes a slide gate that won’t reverse, we already know the likely failure points on the brand before we arrive.
Sunrise’s deed-restricted communities are our daily work environment. We’ve repaired entry operators on Sunrise Lakes Boulevard, coordinated with boards in the Sawgrass communities, and realigned hurricane-bent tracks off Flamingo Road. The gate may be the mechanical problem, but the real job is often the ARC paperwork, the color-match spec, and the board’s preferred vendor process. We know how to work inside that system.
Nelson Arrieta leads the team, and he’s built the company around one principle: diagnosed, not guessed. In Sunrise, where a shared community gate can lock out 200 residents at once, that diagnostic discipline is the difference between a fix and a repeat failure.
Styles & brands we work with
Gate Opener Repair in Sunrise
Gate Opener Repair in Sunrise usually means one of two things: a 1980s or 1990s operator that’s finally worn out its gears, or a newer unit that’s been knocked out of alignment by storm winds and salt corrosion. In the 33304 ZIP, we see powder-coated aluminum swing gates and slide gates throughout the master-planned communities, and the opener is almost never the only failed component. The hinge post sags, the track drifts, the board gets fried by a power surge from a summer storm. Then the opener gets blamed.
Operator Diagnosis Before Replacement
We test the control board output, the motor capacitors, and the limit switch positions before deciding what to replace. A gate opener that’s “dead” is frequently just a blown fuse or a failed safety sensor input. On shared entry systems, a single failed loop detector can shut the whole operator down. We find the actual fault first.
Repair vs. Retrofit on Older Sunrise Gates
Many Sunrise homes still run original 1980s and 1990s operators. Parts are getting scarce, but a retrofit to a modern LiftMaster or DoorKing board and motor often keeps the existing gate panel, which matters a lot in HOA communities where swapping the gate itself requires ARC approval. Repair first, replace only when necessary.
Automatic Gate Repair in Sunrise
Automatic Gate Repair in Sunrise spans the whole system: motor, control board, safety sensors, keypads, remote receivers, and the physical track or hinges. Because so much of Sunrise is HOA-run 55+ and master-planned communities, the automatic gate is usually shared infrastructure, not a personal driveway toy. A failure means tailgating, resident complaints, and an urgent board discussion. We’re used to working within that timeline.
Safety Sensor and Entrapment Protection
Broward County follows strict entrapment-protection codes, and we test every sensor, photocell, and reversal mechanism as part of any automatic gate repair. A gate that won’t reverse at the edge is a liability. A gate that reverses too aggressively dents cars. Sunrise’s salt-laden humidity corrodes sensor housings fast, so we check the wiring at every connection point.
Shared Entry Systems and Resident Access
When a DoorKing or LiftMaster operator fails at a Sunrise Lakes or Sunrise on the Green entry, it’s not one resident locked out. It’s the whole community. We prioritize these calls and coordinate directly with the management company so the work order, the spec match, and the repair happen in the right order.
Trusted Brands We Service in Sunrise
We’re factory-familiar with the brands already installed across Sunrise: LiftMaster and DoorKing on most shared entry systems, FAAC and BFT on high-use commercial gates, and Linear, Viking, Ghost Controls, and Mighty Mule on residential setups. We keep common boards, capacitors, and safety sensor parts on the truck so a single visit to Sunrise often finishes the repair. Brand-specific knowledge means faster diagnosis, less guesswork, and a repair that matches the existing system spec your HOA already approved.
Common Electric Gate Repair Problems We See in Sunrise Homes
- Corroded hinges and sheared hardware on powder-coated aluminum swing gates. South Florida’s salt-laden humidity eats at hinge pins and mounting bolts year-round, and the post-hurricane season months of August through October bring a spike in bent tracks and sheared hinges.
- Shared entry operators failing along with loop detectors and keypad entry. One bad loop detector on a Sunrise Lakes or Sunrise on the Green gate locks out the entire community until the management company approves the repair. The mechanical fix is quick; the approval often isn’t.
- Original 1980s and 1990s slide gate operators with worn rack and pinion gears. The sagging hinge post is usually the hidden culprit. You fix the operator, the post keeps sagging, and the gate eats the new gears in a year. We fix the post or track first, then the drive.
- Post-storm track misalignment and striker realignment. Every hurricane season, wind-load abuse knocks Sunrise slide gates off their tracks and bends the striker plates. A gate that grinds when it opens is usually a track alignment issue, not a motor problem. Realigning before replacing saves real money.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Sunrise, FL
Here’s what we actually charge in Sunrise, and we quote the price and get your sign-off before any work starts. A gate opener motor replacement runs $350 – $650 depending on brand and horsepower. Control board replacement runs $280 – $500. Safety sensor or photocell replacement runs $120 – $280. Keypad or remote receiver programming runs $90 – $180. Slide gate track realignment runs $180 – $400. Diagnostic call-outs are included when we do the repair, and the estimate is free. HOA jobs with board approval built in sometimes carry a small coordination fee if we’re matching specs and providing documentation for the management company.
We Also Serve Cities Near Sunrise
Our service area covers Electric Gate Repair in Sunrise and the surrounding Broward communities. We also handle automatic gate and opener work in Wilton Manors, Boulevard Gardens, Rock Island, and Roosevelt Gardens. Same team, same brand-specific diagnostic approach, same pricing structure.
Serving Sunrise, FL — Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Sunrise
Yes, in most of Sunrise’s deed-restricted communities, any change to the gate panel, finish, color, or operator model requires ARC approval before the work can begin. Mechanical repairs that keep everything looking identical usually don’t need approval, but a replacement operator with different specs often does. We prepare the spec sheet and documentation your management company needs. Call (855) 360-5306 and we’ll walk through what your specific community requires.
Yes, a gate that won’t reverse when it meets resistance is a critical entrapment hazard. Broward County code requires functional entrapment protection, and a failed safety photocell or misadjusted reversal sensor puts residents and vehicles at risk. We treat this as an emergency and can usually get a tech out the same day. Call (855) 360-5306 and mention the gate won’t reverse, we’ll prioritize it.
The combination of wind-load abuse and salt-laden humidity does two things at once: it bends tracks and hinge posts out of alignment, and it accelerates corrosion on every metal connection point. A gate that took a beating during a storm will often run rough for a few weeks, then fail outright when the corroded connector finally gives. We see the spike every August through October, and we stock the common repair components in advance.
Usually, yes. Many 1990s era operators in Sunrise are still mechanically sound, and the failure is a worn rack and pinion gear, a sagging hinge post, or a failed capacitor. We repair what’s repairable and retrofit only when the motor itself is burned out. That said, some boards and motors are simply obsolete, and a retrofit to a modern LiftMaster or DoorKing unit keeps your existing gate panel while bringing the safety systems up to current code. The estimate is free either way. Call (855) 360-5306.
We coordinate directly with the management company or board representative. That means preparing the diagnostic report, the parts spec, and the color and finish match in the format they need for their record. We’ve done enough of these in Sunrise to know that the work order comes first, the repair second, and the documentation third. We handle all three. Call (855) 360-5306 with the community name and the gate issue, and we’ll take it from there.
Contact Archway Gate Repair in Sunrise
If your Sunrise gate is stuck, grinding, or failing to reverse, call us at (855) 360-5306. We’ll diagnose the problem over the phone when we can, quote you a firm price before any work begins, and schedule around whatever HOA approval sequence your community requires. We work on the brand already on your property, and we fix it from the motor to the hinge.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Sunrise and the surrounding Broward County communities.