Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Terra Mar
Electric gate repair in Terra Mar runs $185 to $640 for most jobs, and the biggest cost factors are the motor, the control board, and whether salt corrosion has reached the wiring. We quote that price before any work starts, so you know the number before we touch a single bolt. If your gate is dead, stuck open, or grinding after the last storm, call (855) 360-5306 and we’ll send a tech who knows exactly what barrier-island salt air does to gate hardware. Terra Mar gates fail differently than inland Broward gates, and we diagnose them accordingly.
Why Archway Gate Repair Is Terra Mar’s Preferred Electric Gate Repair Company
Terra Mar homeowners call us when the gate that has worked for years suddenly will not open, or when it opens halfway and groans, or when the keypad goes dark after a squall. We work on the brand already on your property, which means the tech who arrives already knows the common failure points on your LiftMaster, FAAC, BFT, or DoorKing system before the truck is in park. That is the difference between a specialist and a generalist, and it shows up in how fast we find the problem. We have pulled corroded boards out of near-new openers on Terra Mar Drive and replaced rack-and-pinion gears on gates facing the Intracoastal, and the pattern is always the same: salt attacks the electronics first, then the moving metal.
Our team covers all of ZIP 33072, from the estates along Terra Mar Drive to the waterfront compounds near the eastern shoreline. Response time to Terra Mar is typically under two hours for emergency calls during business hours. We are licensed and insured, and every job gets a written quote before work begins. Nelson Arrieta, the owner, built this company on a repair-first philosophy: diagnose the honest fix, replace only when necessary, and never sell a job the customer does not need. That approach matters on a barrier island where gates are custom and replacements cost real money.
Styles & brands we work with
Automatic Gate Repair in Terra Mar
Automatic Gate Repair in Terra Mar means dealing with three things at once: the motor, the control electronics, and the physical gate. Salt spray, wind load, and saturated ground all work against each of them, and a gate that fails here usually has more than one problem by the time we arrive. Typical automatic gate repair in Terra Mar runs $225 to $520, depending on whether we are replacing a board, re-leveling a post, or swapping a motor that salt has finally killed.
Solid Panel Swing Gates and Wind Load
A solid-infill swing gate acts like a sail in hurricane-season gusts. The operator has to push against wind pressure it was never sized for, and over time the hinge post cracks at its base where the load concentrates. On Terra Mar estates, where many gates are custom-height and solid, we see this failure in less than five years.
Post Footings and Saturated Ground
Barrier-island soil stays wet, and wet soil moves. When a post footing shifts even an inch, the gate sags, the rack and pinion misaligns, and the motor strains to compensate. Re-leveling a footing in Terra Mar sometimes means digging down to find a base that salt-crusted rebar has already compromised.
Electric Gate Motor in Terra Mar
Electric Gate Motor repair in Terra Mar is the most common call we get, because the motor sits closest to the salt and the heat. A replacement motor for a typical estate gate here runs $350 to $850 installed, while a rebuild of a serviceable motor runs $185 to $400. The telltale signs are a gate that hums without moving, a gate that moves in slow motion, or a motor housing that has white salt bloom around the vents.
Salt-Corroded Motor Housings
On a barrier island like Terra Mar, the motor housing breathes salt fog every single day. Seals fail, moisture gets inside, and the armature starts to corrode. We have opened up motor housings that looked brand new on the outside and found rust weeping down the windings. That is a Terra Mar pattern, not a generic South Florida pattern.
Overheated Operators and Storm Recovery
After a power outage, when electricity returns and the estate owner re-engages the gate, the motor sometimes gets fed the wrong phase of operation and cooks itself. A motor that has already been weakened by salt is more likely to fail in that moment. We check the motor, the capacitor, and the limit switches together, because one good part on a gate with one bad part is still a gate that does not work.
Trusted Brands We Service in Terra Mar
We service the brands most often installed on Terra Mar estates: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Many of the custom gates here use BFT or Linear operators, and we keep common parts for those systems stocked for faster turnaround. If you have a Ghost Controls gate or a Viking operator, we know their failure points well enough to tell you what is wrong before we unload the truck. From the motor to the hinge, we work on the gate already on your property.
Common Electric Gate Repair Problems We See in Terra Mar Homes
- Salt-frozen hinges on near-new gates: Hinges exposed to Terra Mar’s ocean air seize within two to three years, and every cycle after that grinds metal into metal. We free them, replace the pins, and coat the assembly so you get more than a season out of it.
- Corroded control boards inside dry-looking operator housings: The housing looks fine until you open it and see green-white corrosion on the board traces. This is the number one reason an estate gate in Terra Mar goes completely dead.
- Wind-cracked hinge posts on solid swing gates: Barrier-island wind loads crack the post at ground level, the gate sags, and the opener struggles until it burns out. We reset the footing, plumb the post, and brace it for the next storm season.
- Post-storm power problems and manual-release confusion: After an outage, owners cannot remember how to disengage the operator, and the gate sits stuck. We walk every customer through the manual release before we leave, because the next storm is coming.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Terra Mar, FL
A control board replacement on a typical Terra Mar estate gate runs $280 to $550. Safety photocell replacement runs $95 to $210 per side. Keypad repair or replacement runs $85 to $240. A full automatic gate motor rebuild runs $185 to $400, and a new motor runs $350 to $850 installed. What moves the price is the brand, whether the post footing needs re-leveling, and how far the salt has spread. We quote the number before we start, and we stick to it. Call (855) 360-5306 for a free estimate and a written quote before any work begins.
We Also Serve Cities Near Terra Mar
Our Electric Gate Repair team also serves Lauderdale-by-the-Sea, Kendall Green, Lighthouse Point, and Pompano Beach Highlands. If you are in Terra Mar or any nearby coastal community, call (855) 360-5306 and we will route the nearest tech to you.
Serving Terra Mar, FL — Our Local Coverage Area
We’re based in the Terra Mar area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Terra Mar
Every automatic gate has a manual release, usually a red handle or a keyed lever on the operator housing, and pulling it disconnects the motor so the gate can be pushed by hand. On LiftMaster, BFT, and Linear operators the release is either a pull-chain or a quarter-turn key on the side of the motor housing. Pull it, push the gate slowly, and if it will not move, the salt has likely seized the hinges or the rack and pinion. Call (855) 360-5306 and we will come free it and restore power.
Salt-laden ocean air reaches every gate in Terra Mar, and it attacks motor windings, control board traces, and limit switches continuously. A gate that lasted eight years in Plantation or Weston may last three here. The fix is a repair approach that replaces salted components with corrosion-resistant parts and seals the operator housing properly, not just dropping in a new board and leaving the housing open to the next salt breeze.
Wind load on a solid-infilled gate transfers force down the gate frame and into the hinge post, and when the base of the post is already sitting in saturated barrier-island ground, the post gives way. The gate sags, the latch side drags, and the operator motor strains. We dig down, reset the footing, plumb the post, and re-align the gate so the operator is not fighting the wind and the weight.
Yes, and this is not optional. Photo-eyes are the safety sensors that stop the gate if a car, child, or pet is in the swing or slide path, and they are required by Florida building code. Salt corrosion shorts them out, and a gate with dead photo-eyes will either refuse to close or reverse unexpectedly. We test them on every Terra Mar call and replace corroded ones on the spot.
Yes. We prioritize post-storm Terra Mar calls and we work from the manual release outward: free the gate, assess the motor and board, reset or replace the footing if it shifted, and then bring the gate back online with the owner present. Call (855) 360-5306 as soon as the storm passes and we will get to you, typically the same day if the roads are open.
Contact Archway Gate Repair in Terra Mar
If your Terra Mar gate is stuck, dead, grinding, or refusing to close, call (855) 360-5306 today for a free estimate. We will tell you what is wrong, quote the exact price, and fix it without upselling a replacement you do not need. That is how we have built our reputation on this island, one gate at a time.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Terra Mar and greater Broward County.