Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across The Hammocks
Electric gate repair in The Hammocks usually means one of two things: an operator that stopped responding, or a gate that drags, sags, or won’t close. Most calls we take from The Hammocks are for 1990s – 2000s builder-grade operators that have finally given out, especially control boards and loop detectors that were never built for Miami-Dade humidity. We work on the brand already on your property, and we stock or can quickly source parts for the systems most common in The Hammocks’ gated villages. If your gate is stuck open, beeping, or only works with the remote sometimes, call (855) 360-5306 and we’ll get someone out to diagnose it.
Why Archway Gate Repair Is The Hammocks’s Preferred Electric Gate Repair Company
We’re gate specialists, not a fencing company that also “does gates.” Electric gate repair is our core work: motors, control boards, safety loops, keypads, wiring, and the mechanical parts underneath all of it. In The Hammocks, that focus matters because so many original builders installed systems from LiftMaster, Linear, and FAAC. We know those brands’ failure points before we arrive, which means we diagnose faster and don’t spend your money on trial-and-error or parts that won’t match the system.
Our technicians have hands-on experience across nine gate brands, including LiftMaster, FAAC, BFT, DoorKing, and Mighty Mule. On a shared slide gate in a 1990s gated village off Hammocks Boulevard, we found the original LiftMaster operator’s control board was obsolete and the rack and pinion was worn from years of humidity. We retrofitted a new FAAC operator with updated safety photocells, but first had to replace the rusted hinge post footing to correct the sag – fixing the panel alone would have failed again. The HOA approved the retrofit after we documented that the old board was discontinued. That’s the level of detail you get when you work with us in The Hammocks.
Styles & brands we work with
Electric Gate Motor in The Hammocks
An Electric Gate Motor in The Hammocks powers swing and slide gates at single-family homes and at shared village entrances. When the motor fails, the gate doesn’t move at all, moves partway and stops, or whines and trips its breaker. We check the operator’s capacitor, gear assembly, limit switches, and the power feed from the house or pedestal. In this humid climate, motors also attract corrosion around their terminals and mounting brackets, and that corrosion often mimics a dead motor when the real problem is a bad connection.
Operator Retrofit vs. Motor Swap
Many The Hammocks homes have original operators that are no longer manufactured, so we often retrofit a current motor drive onto the existing gate rather than replacing the entire panel. A full operator replacement on a residential swing gate in The Hammocks typically runs $950 – $1,800 depending on gate weight and whether we’re reusing the old motor mount or installing new ones. If the gate itself is still solid and square, a motor swap or retrofit is usually the cheaper, faster fix.
Motor Replacement Cost Factors
On a heavier slide gate, like those at some village entrances, the motor, rack, and control wiring cost more, and you’ll often be in the $1,600 – $2,900 range for a complete motor replacement with new safety loops. We give you a written price before any work starts, and that price is what you pay unless we uncover something structural mid-repair and you approve the change first.
Gate Access Control in The Hammocks
Gate Access Control work in The Hammocks covers the electronics that decide who gets in: keypads, intercom or call boxes, remote receivers, loop detectors, and the boards that connect them all. In The Hammocks’ gated villages, this equipment is often shared HOA infrastructure, so a failed keypad or dead call box usually means coordinating the repair with the HOA board before we can touch it. We’re used to that process and we document everything: which board failed, why it failed, and what the retrofit or repair options are, so the HOA has what it needs to approve the work.
Keypad and Call Box Repairs
Outdoor keypads in The Hammocks fail faster than anywhere else we work. UV and year-round moisture eat through the membrane switches and corrode the wiring behind the faceplate. A keypad or call box replacement for a residential gate usually runs $280 – $600, and we always verify the wiring back to the controller so a corroded splice doesn’t kill the next keypad too.
Loop Detectors and Safety Sensors
When guests press the keypad and nothing happens, or when a gate starts closing on a car that’s still in the way, loop detector or safety sensor failure is the usual culprit. Loop detector replacement in The Hammocks typically costs $250 – $500 per loop, including saw-cutting and sealing the asphalt or concrete. Photocell safety sensors run $180 – $350 installed. These are safety-critical parts, and we test them after installation to make sure the gate reverses or stops correctly.
Trusted Brands We Service in The Hammocks
We work on the gate systems already installed in The Hammocks: LiftMaster and Linear from the original 1990s builds, FAAC and BFT on many of the newer HOA retrofits, and Mighty Mule on residential driveway gates where homeowners added automation later. We don’t push you toward a brand we carry. We repair what’s there, and when a retrofit is the right call, we spec the control board, motor, or safety system that matches your gate’s weight and duty cycle. For The Hammocks customers, we stock common parts locally so we’re not waiting on a distributor for every diagnosis.
Common Electric Gate Repair Problems We See in The Hammocks Homes
- Obsolete control boards in original builder-grade operators. LiftMaster and Linear boards from the 1990s are frequently discontinued, which means a “simple board swap” often becomes a retrofit. We document the discontinued part and source a current replacement that fits the existing operator.
- Corrosion at the hinge posts and post footings. Salt-laden air and year-round moisture rust the steel inside the hinge post, causing the gate to sag and drag even when the operator and hinges look fine. Fixing the panel alone doesn’t work; the post footing or the post itself has to be addressed.
- Outdoor keypads and loop detectors failing from UV and humidity. The Hammocks sees more keypad membrane failures and loop detector faults than most of Miami-Dade because the equipment sits in direct sun and wet conditions for a decade at a time.
- Safety sensors tripped or bypassed after older operator installations. Many 1990s gates were hung before current UL 325 entrapment rules, so photocells and reversing loops may be missing or disabled. We can retrofit the proper protection onto most existing operators.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in The Hammocks, FL
You’ll find honest numbers here. A keypad or safety sensor replacement in The Hammocks runs $180 – $600, a loop detector replacement runs $250 – $500 per loop, and a residential swing gate operator replacement runs $950 – $1,800. Slide gate operators cost more, usually $1,600 – $2,900 with new rack and controls. Service calls for diagnosis are free, and we quote every repair in writing before any work starts. That way you know exactly what the board, motor, or keypad costs and what the labor costs, and the HOA gets a breakdown it can review. Call (855) 360-5306 for a free estimate, and we’ll come to your gate in The Hammocks, look at what’s there, and tell you what it needs.
We Also Serve Cities Near The Hammocks
Our technicians cover The Hammocks and the surrounding Miami-Dade communities, including Electric Gate Repair service in Country Walk, The Crossings, Three Lakes, and Kendall West. If your gate is in one of those areas, or if you manage an HOA with multiple gates across several villages, call us and we’ll route a technician to you. You can also read more about our service area at Electric Gate Repair in The Hammocks.
Serving The Hammocks, FL — Our Local Coverage Area
We’re based in the The Hammocks area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in The Hammocks
If your control board is a LiftMaster or Linear part from the 1990s, it’s likely discontinued, and finding a drop-in replacement is often impossible. We can sometimes repair the board if the failure is a capacitor, relay, or a damaged solder joint, but when the board is fried from a power surge or corrosion, a retrofit is the practical answer. A retrofit typically costs less than replacing the entire operator, usually $450 – $900 for most residential gates in The Hammocks, and we’ll quote you the exact board and labor before we start. Call (855) 360-5306 and we’ll test the board before recommending anything.
In The Hammocks’ gated villages, the operator, call box, and safety loops at the community entrance are often HOA-owned, while the gate and operator at a specific home belong to that homeowner. When there’s a question about who pays, we provide a written repair scope that the HOA can review, including which part failed and whether it’s part of the shared access system. We’ve worked with many HOAs in The Hammocks on exactly this, and we’re used to submitting documentation for board approval.
A sagging gate in The Hammocks is usually not a hinge problem; it’s the hinge post or its footing that has rusted or shifted. Adjusting the hinges might make it close for a few weeks, but the post will continue to lean and the gate will bind again. We can replace the hinge post and reset the footing, which typically runs $700 – $1,500 depending on the wall or column, and that’s often the real fix.
UV from direct sun and constant humidity break down keypad membranes and corrode sensor wiring faster in The Hammocks than in drier parts of Florida. The equipment sits outside all day, every day, and it was never sealed for Miami-Dade’s climate. We install replacement keypads and sensors with proper sealing and weatherproofed connections, but you should still plan on replacing outdoor access components every 6 – 10 years here.
Yes. Any electric gate operator should have entrapment protection: either non-contact sensors like photocells, or contact sensors like reversing edges, and the gate must reverse when it meets an obstruction. Many 1990s operators in The Hammocks were installed before these rules were fully enforced, and some have no working safety sensors at all. We can retrofit UL 325-compliant photocells and reversing edges onto most existing operators, typically for $350 – $800, and we’ll verify the reversal force setting while we’re there. Call (855) 360-5306 and we’ll make sure your gate stops safely.
Get Your Electric Gate Working Again in The Hammocks
If your gate won’t open, won’t close, or only works when it feels like it, we’ll come to you in The Hammocks, figure out exactly what failed, and give you a written price before any work starts. You get a specialist who knows your gate’s brand and its weak points, not a generalist who spends your afternoon guessing. Call (855) 360-5306 for a free estimate, or to schedule a service call in The Hammocks today.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving The Hammocks and surrounding Miami-Dade gate communities.