Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pembroke Pines, FL
Most gate failures we see in Pembroke Pines start the same way: a builder-era operator from the 1990s or early 2000s finally gives out, and the homeowner discovers the board is corrosion-damaged before anyone even opens the housing. We install, repair, and maintain gate systems across the 33028 and 33082 ZIP codes, from single driveway slide gates in SilverLakes to full community entry arms governed by HOA boards. The city’s Mediterranean-style stucco homes, many now 15 to 25 years old, were built in phases that all used the same gate hardware, which means we already know what’s on your property before we arrive. Call (855) 360-5306 and we’ll tell you what it’ll take to get your gate back online.
Why Pembroke Pines Homes Are Different
Pembroke Pines grew as a build-out of large master-planned communities and HOA-governed subdivisions, which shapes nearly every gate job here. In neighborhoods like SilverLakes, Pembroke Falls, and Grand Palms, the driveway gate is often shared infrastructure with an architectural review process behind it. A homeowner can’t just swap a failed swing operator for a different model without board sign-off in many cases, and the HOA may already have a preferred spec we need to match. When one builder installed the same operator across 200 homes in a single phase, that model tends to fail across the whole street within the same two-year window. We’ve repaired enough Elites and Mighty Mules in Pembroke Pines to know which failure patterns show up first.
South Florida humidity and salt-laden air from coastal Broward accelerate corrosion on control boards and low-voltage wiring. The near-daily summer thunderstorms bring surge damage that kills transformers and logic boards in ways you don’t see in drier markets. Hurricane-season wind codes also mean the gates here are reinforced and heavy, which puts real strain on hinges, motors, and opener arms. A gate that’s sagging in Pembroke Pines isn’t just an alignment issue; it’s usually a hinge that’s been fighting that weight for twenty years. We account for all of this when we diagnose, because the environment here fails components on a schedule that other parts of Florida don’t follow.
Styles & brands we work with
Our Main Pembroke Pines Services
These are the two jobs Pembroke Pines homeowners and property managers call us about most often, and each has its own detailed page with pricing, signs, and what happens on site.
Gate Repair in Pembroke Pines
When a gate stops mid-travel, grinds against the track, or won’t latch, we’re the crew that opens the housing and finds the actual fault instead of quoting a blanket replacement. Pembroke Pines gates from the 1990s and 2000s often have worn hinge pins, corroded limit switches, or brackets pulled loose on the stucco columns. We work on the brand already on your property, which means the diagnostic step goes faster and you’re not paying for us to learn the system from scratch. The full breakdown of what gate repair costs and which problems we see most in Pembroke Pines is on the dedicated page: Gate Repair in Pembroke Pines.
Electric Gate Repair in Pembroke Pines
An electric gate that won’t open, opens halfway, or reverses for no reason usually has a problem in the motor, the control board, or the safety loop wiring, and Pembroke Pines humidity makes all three more likely to fail. We carry parts for LiftMaster, FAAC, BFT, DoorKing, Mighty Mule, and the other systems already installed across the city’s gated communities. Surge damage from summer lightning is a recurring issue here, and we test the board and transformer rather than guessing at the fix. Electric gate repair is a core specialty for us, not a subcontracted extra. See what’s involved and what it runs: Electric Gate Repair in Pembroke Pines.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pembroke Pines
New gate installation in Pembroke Pines usually comes down to one of two situations: a builder-grade operator from the 1990s has finally failed and the HOA wants a matched replacement, or a homeowner wants a heavier, wind-rated gate that the old posts can’t carry. The climate here punishes lightweight hardware, so we select frames, hinges, and operators that can take the humidity and the hurricane-season wind loads without constant adjustment. If you need a full replacement rather than a patch, our Gate Installation service covers everything from the posts to the final safety sensor test.
Automatic Gate Installation
Signs you need it
You’re manually pushing a gate that was designed to open on its own, or the operator is loud, slow, and trips the breaker when it runs.
What it costs in Pembroke Pines
Automatic gate installation in Pembroke Pines typically runs $1,800 to $4,500 depending on gate weight, operator type, and whether new conduit has to be run under the driveway.
How we do it
We check the posts and mounting reinforcement first, install the operator and arms to wind-load spec, run the low-voltage wiring through sealed conduit, and program the travel limits and safety loops before we call it done.
Driveway Gate Installation
Signs you need it
The existing driveway gate sags off its hinges, the stucco posts are cracked from years of South Florida wind, or the HOA has flagged the current gate as out of compliance.
What it costs in Pembroke Pines
Expect $1,500 to $4,000 for a full driveway gate installation when the posts are sound, and more toward the top if we’re rebuilding a corroded frame or adding a new steel post.
How we do it
We measure the driveway opening and post dimensions, confirm the HOA’s finish requirements, anchor the hinges or track, hang the gate, and set the opener so it runs smooth from day one.
Sliding Gate Installation
Signs you need it
Your driveway slopes toward the road, a swing gate hits a car parked near the arc, or the existing slide track is bent and derailing the gate wheels.
What it costs in Pembroke Pines
Sliding gate installation in Pembroke Pines generally falls between $1,800 and $4,500, with the higher end covering longer gates, heavy wind-rated frames, and new track beds.
How we do it
We lay the track or cantilever base, hang the gate, install the operator and chain or rack drive, then adjust the limit switches and safety edges until the gate travels cleanly without binding.
What Gate Installation Costs in Pembroke Pines
| Item | Typical range in Pembroke Pines |
|---|---|
| Automatic gate installation | $1,800 – $4,500 |
| Driveway gate installation | $1,500 – $4,000 |
| Sliding gate installation | $1,800 – $4,500 |
Does the HOA have a say in my new gate?
Yes, in most Pembroke Pines subdivisions the architectural review board or HOA must approve the gate style, finish, and sometimes the operator model before work starts. We can provide the spec sheet and photos boards typically ask for.
How long does a new gate install take in Pembroke Pines?
Most single driveway gate installations take one day on site, though board approval, material lead times, and any post replacement can push the project to a week or two from start to finish. Call (855) 360-5306 and we’ll give you a real schedule.
Brands We Service in Pembroke Pines
We work on the brand already on your property. That includes LiftMaster, FAAC, Mighty Mule, and Elite systems found throughout Pembroke Pines, with common boards, arms, safety sensors, and hinge kits kept on hand for faster turnaround. See the full lineup on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pembroke Pines, FL
| Service | Typical range in Pembroke Pines |
|---|---|
| Gate repair – hinge and alignment | $125 – $350 |
| Gate repair – bolt, bracket, or latch fixes | $125 – $350 |
| Gate opener motor repair | $200 – $500 |
| Gate sensor or safety loop repair | $125 – $325 |
| Electric gate repair – board or wiring | $200 – $600 |
| Electric gate opener replacement | $350 – $1,200 |
| Gate service call and diagnostic | $50 – $150 |
| Automatic gate installation | $1,800 – $4,500 |
| Driveway gate installation | $1,500 – $4,000 |
| Sliding gate installation | $1,800 – $4,500 |
Prices push toward the higher end in Pembroke Pines when a board-level surge repair is needed, when a gate is so corroded it needs new hinges and a post rebuild, or when HOA compliance requires a specific finish or operator model. Every repair is quoted and agreed before any work starts, so the number we give you is the number you pay.
Neighborhoods We Serve in Pembroke Pines
We run service calls all over Pembroke Pines, from the gated enclaves in the west to the older 1980s subdivisions in the east. Our techs are familiar with the builder hardware each area tends to have, so diagnosis goes faster.
- SilverLakes
- Pembroke Falls
- Grand Palms
- Chapel Trail
- Westfork
Service Area – Cities Near Pembroke Pines
We also cover the communities around Pembroke Pines, including Cooper City, FL, Pine Island Ridge, FL, Hollywood, FL, and Andover, FL. If you’re just over the line in one of these areas, call and we’ll let you know when we can be there.
Serving Pembroke Pines, FL — Our Local Coverage Area
We’re based in the Pembroke Pines area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pembroke Pines
We schedule same-day and next-day calls across Pembroke Pines whenever the schedule has room, and we prioritize gates that are stuck closed or blocking a driveway. Call (855) 360-5306 early in the day and we’ll give you the first available window.
Repairs that keep the existing gate and operator in place usually don’t need board review, but full replacements or anything that changes the gate’s appearance often do. We’ll tell you which camp your job falls into and can supply the details your board wants.
Yes. We work with several Pembroke Pines HOAs on fleet-wide gate maintenance, which works well here because so many phases share identical builder hardware. We track each gate’s model, age, and repair history so recurring problems get resolved instead of patched.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pembroke Pines Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Rohan Sharma"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Laura Schaefer"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Danika Ellison