Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across West Hollywood
When an electric gate stops working in West Hollywood, it’s rarely just an inconvenience. It’s a driveway you can’t use, a property left open, or a commercial entrance blocking deliveries. Most gate failures in the 33021 zip code fall into a few predictable categories: dead control boards on older operators, sagging gates from worn hinge posts, and missing or failed safety photocells on pre-code installations. We fix all of these. As a gate-only specialist, our Electric Gate Repair team diagnoses the actual failure rather than guessing at it, and we carry parts for the brands already installed on West Hollywood properties. Call (855) 360-5306 for service that treats your gate like the security barrier it is, not a side project.
Why Archway Gate Repair Is West Hollywood’s Preferred Electric Gate Repair Company
West Hollywood’s housing stock is older than most of Broward County, and so are its gates. Many driveways along Dewey Street and the surrounding blocks still run LiftMaster or Linear operators from the 1990s and early 2000s. Those units have known failure points: capacitors that dry out in the heat, control boards that corrode in the humidity, and limit switches that drift after years of storm-season cycling. We know these machines because we repair them daily across 33021, not because we looked up a manual. When you call us about a West Hollywood gate, the technician already recognizes the failure pattern before arriving.
Homeowners and property managers in West Hollywood tell us the same thing: they’ve had general handymen out twice who replaced a battery or greased a hinge and left the real problem untouched. That doesn’t happen with a gate specialist. Nelson Arrieta built Archway Gate Repair around diagnosis before parts, repair before replacement. We work on the brand already on your property, from the motor to the hinge, and we quote the honest fix before any work starts.
Styles & brands we work with
Commercial Gate Operator in West Hollywood
Commercial Gate Operator work in West Hollywood usually means restoring a slide or swing gate at a small apartment building, medical office, or retail lot to consistent, code-compliant operation. The job involves testing the operator’s full circuit: incoming power, loop detectors, safety edges, photocells, and the motor or hydraulic pump itself. In 33021, rust and salt air accelerate wear on operator housings and hinge hardware, and operators that run dozens of cycles per day fail faster than residential units.
Retrofit Versus Replacement
When a commercial operator’s control board fails, we often retrofit a modern compatible board rather than replacing the whole operator. This keeps a quality gearbox in service while updating the brain to current safety requirements. If the motor itself is burned out or the rail is worn beyond adjustment, replacement is usually the cheaper answer over three to five years.
Access Control Integration
Most West Hollywood commercial gates use keypads, telephone entry, or card readers tied to the operator. When the gate fails, the access system usually isn’t the problem; it’s the operator not responding to the signal. We test the full chain, from keypad output to control board input to motor response, so you’re not paying a security contractor to fix a motor problem.
Gate Opener Repair in West Hollywood
Gate Opener Repair in West Hollywood is the work we do most often on residential properties. A swing gate that creeps open mid-cycle, a slide gate that jams on its track, an opener that hums but doesn’t move: these are operator failures, not gate failures. On a compact lot off Dewey Street, we diagnosed a 20-year-old LiftMaster swing gate operator that was tripping its internal breaker. The control board was obsolete, and the gate’s hinge post was rusted through at the footing, causing the gate to sag and bind. We replaced the board with a modern compatible unit, added safety photocells, and re-set the hinge post in fresh concrete, restoring smooth operation and code compliance. That’s the full-system approach: the motor isn’t the only thing that can fail, and fixing the board while ignoring the post would have meant another call in six months.
Control Board and Limit Switch Repairs
Older LiftMaster and Linear boards are prone to heat-related failures in South Florida. Symptoms include gates that open but won’t close, intermittent operation, or complete dead panels. We also calibrate limit switches and force settings, because a gate that reverses mid-cycle is often fighting a bad limit setting rather than a bad board.
Battery Backup and Surge Protection
After a named storm, we see a wave of dead battery-backup operators across West Hollywood. The batteries sat untested for years, and the first real outage kills them. We test and replace backup batteries and recommend surge protection for the operator’s control board, which is the component most often destroyed by lightning and power surges during hurricane season.
Trusted Brands We Service in West Hollywood
We’re factory-familiar with the operators already installed on West Hollywood properties, including LiftMaster, FAAC, BFT, and Linear. That matters because each brand has its own failure signatures: LiftMaster boards corrode at the terminal strip, FAAC hydraulic operators leak at the pump seals, BFT slide gate limits drift with temperature swings, and Linear actuators strip gears when the gate binds. We stock common boards, remotes, photocells, and limit switches locally so turnaround for West Hollywood jobs is measured in days, not weeks. If a part has to be ordered, we tell you the truth about lead time and cost before we order it. We work on the brand already on your property, and if the operator is obsolete, we’ll explain your retrofit options honestly.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in West Hollywood Homes
- Obsolete control boards on legacy LiftMaster and Linear operators. Heat and humidity inside the operator housing degrade capacitors and relays until the board fails, leaving the gate stuck open or closed. Many of these units date to the 1990s, and the board is no longer manufactured, so a modern compatible retrofit is the practical repair.
- Sagging gates from worn hinge posts and footings. West Hollywood’s older steel and wood gates were set in concrete footings decades ago. Rust at the footing and loosened anchor bolts let the gate drift downward, which strains the operator motor and trips the internal breaker repeatedly.
- Missing or failed entrapment protection. Many gates in 33021 were installed before UL 325 entrapment rules required safety photocells and edge sensors. A gate that reverses unexpectedly or crushes an object isn’t just annoying; it’s a documented safety hazard and a liability on the property.
- Storm-season power damage. The June through November window brings lightning strikes and power surges that fry control boards, plus wind events that loosen hinge plates and knock gates out of alignment. Gates that worked fine before the storm fail because the wind flex found the weak point.
Pricing for Electric Gate Repair in West Hollywood, FL
A typical electric gate service call in West Hollywood runs $95 to $150 for diagnosis, which is credited toward the repair if you approve the work. Control board replacement on a LiftMaster or Linear operator runs $350 to $650 including the part and labor. Adding safety photocells to a pre-UL 325 gate costs $180 to $320 per pair, installed and aligned. Gate opener motor replacement runs $450 to $900 depending on the brand and swing versus slide setup. Hinge post re-setting in fresh concrete runs $250 to $500 including materials. If full gate replacement is the honest answer, a new residential swing gate operator and all safety hardware typically runs $1,800 to $3,200 in West Hollywood. Every job is quoted in writing before work begins, so you know the exact number. Call (855) 360-5306 for a free estimate on your specific setup.
We Also Serve Cities Near West Hollywood
Our electric gate repair service covers West Hollywood and the surrounding Broward County communities. Customers in Hollywood, Andover, Carver Ranches, and Miramar call us for the same brand-specific diagnosis and repair-first approach. If your gate is down and you’re anywhere near 33021, call (855) 360-5306 and we’ll schedule a visit.
Serving West Hollywood, FL — Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in West Hollywood
Yes, in most cases replacing the control board on an operators from the 1990s and adding safety photocells is a practical and code-compliant repair. The retrofit brings the operator’s entrapment protection up to current UL 325 standards without replacing a still-working motor and gearbox. We’ll confirm the board’s compatibility with your existing motor and limits, then quote the retrofit, typically $350 to $650 for the board and $180 to $320 for the photocell pair. Call (855) 360-5306 and we’ll tell you what your operator actually needs.
In West Hollywood, a sagging double driveway gate after a storm usually means wind flex loosened the hinge plates and the operator’s battery backup was already dead from sitting untested. The sag strains the operator motor, and the dead or undercharged battery kills any chance of storm readiness. We’ll re-set the hinge hardware, align the gate leaves, and load-test the battery backup to confirm whether it holds a charge under load. Call (855) 360-5306 for a same-week appointment.
If your gate reverses when it meets resistance mid-travel, it may lack working entrapment protection. UL 325 requires monitored photocells or contact edges on any automatic gate, and a gate installed before the rule may have neither. The telltale signs are no visible safety sensors on the posts, or sensors that are cracked and non-functional. We inspect every gate we service for entrapment protection and quote the hardware to bring it up to code, because a gate without it is both a safety risk and a legal liability for the property owner. Call (855) 360-5306 and we’ll check yours.
A jammed rack and pinion slide gate in West Hollywood is often repairable: the rack itself may be bent or the pinion gear worn, and replacing those components is far cheaper than a whole new system. We also check the track rollers and the gate’s weight distribution, because a rack and pinion operator that strains is usually working against a misaligned or rusted roller stack. Repacking the rollers and replacing the rack or pinion commonly runs $300 to $700, versus $2,500 to $4,000 for a full slide gate operator replacement. We’ll show you the damaged part before we quote repair or replacement. Call (855) 360-5306 with your gate’s symptoms.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which covers the vast majority of operators installed in West Hollywood homes and commercial properties. We’re factory-familiar with each brand’s failure points, so diagnosis is faster and parts are matched to the existing system. If your operator is obsolete and the original board is discontinued, we’ll recommend a modern compatible retrofit rather than a trial-and-error substitution. Call (855) 360-5306 and tell us the brand on your gate.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving West Hollywood and Broward County.