Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Andover
A sagging driveway gate or a slide opener that won’t budge in Andover usually comes down to one of three things: a hinge post that shifted on a shared property line, corrosion from salt-laden humidity, or an operator fighting a tight setback. We fix all three, and we do it from a position of knowing exactly what your gate is up against before we arrive. Archway Gate Repair is a gate-only specialist serving Andover’s 33023 ZIP, and we work on the brand already on your property. If your gate is down right now, call (855) 360-5306.
Why Archway Gate Repair Is Andover’s Preferred Gate Repair Company
Homeowners around Andover call us because their gate sits on a fence line that doubles as the boundary between two lots. That changes the repair. A post that leans three inches isn’t just an eyesore; it can mean the gate now swings over a neighbor’s property line, which turns a hardware problem into a dispute. We think through that before we touch a wrench.
Nelson Arrieta leads a team that has spent its entire working life on gates, not fences, not garage doors, not general handyman work. We diagnose LiftMaster and FAAC openers the way a mechanic reads an engine code: by symptoms, by brand failure patterns, by the specific way Andover’s humidity and storm season has worn the parts. Diagnosed, not guessed.
We also know the local rhythm. Every summer, hurricane prep sends a wave of post-storm realignment and opener-reset calls through Andover and the adjacent Miramar boundary. We plan our parts stock and scheduling around that season because we work here all year.
Andover homeowners tell us the same thing: they called a generalist first, got a replacement quote, and then called us. Repair first, replace only when necessary. That’s how we work, and it’s why most of our calls in 33023 come from people who already have our number saved.
Styles & brands we work with
Gate Welding in Andover
Gate welding in Andover is usually about repair, not fabrication from scratch. The iron and steel gates throughout this 33023 pocket corrode quickly in salt-laden air, and weld joints are the first point of failure. A rusted hinge bracket, a cracked stile, a bottom rail that’s separated from the pickets, they all need a welder who understands South Florida metal. We do that work in place whenever the gate is still structurally sound, which saves Andover homeowners from replacing an entire gate over a few failed welds.
Rust Repair and Reinforcing
When a weld fails on a chain-link or ornamental iron gate near the coast, the surrounding metal is usually thinned by rust. We cut back to solid steel, weld in new material, and grind it to match. The repair typically outlasts the original joint because we use materials suited to Andover’s salt air.
Hinge and Post Welding
A hinge that’s torn loose from an iron post usually means the post itself has a fatigue crack or corrosion pocket. We weld the hinge back to sound metal and add a gusset where the geometry allows. The goal is a gate that hangs square and swings without dragging, even after the next storm season passes through.
Gate welding in Andover runs $150 to $450 for typical rust repair and hinge reattachment. A cracked post or heavily rotted bottom rail can push toward $600 to $900 if we need to cut out and weld in substantial new sections. We quote it on site, walk you through what’s needed, and the price is agreed before any work starts.
Commercial Gate Repair in Andover
Commercial gate repair in Andover covers the small multifamily parcels, duplex lots, and a few light-commercial properties scattered through 33023, not massive industrial gates. The failure patterns here are the same ones we see on residential gates, but the stakes are different: a stuck slide gate at a small apartment building blocks every tenant, and a broken pedestrian gate becomes a liability. We handle those calls with the same brand familiarity we bring to a single-family driveway, because the equipment is often identical: LiftMaster, FAAC, BFT, Elite.
Slide Gate Operators on Tight Properties
Commercial slide gates in Andover often fight the same compact setbacks as residential ones. When a slide operator strains against a misaligned rack and pinion, the motor overheats and the board faults out. We correct the gate path first, then reset the operator. Fixing the geometry means the new motor doesn’t burn out the same way the last one did.
Safety Systems and Entrapment Protection
Any automated gate, especially on a commercial property, has to meet entrapment protection standards. We test and repair safety photocells, edge sensors, and the reversing function on every service call. If your gate doesn’t stop and reverse when it hits resistance, that’s a liability in Andover, and we treat it as an urgent repair, not a suggestion.
Commercial gate repair in Andover typically runs $180 to $500 for common operator and safety system repairs. A full slide operator replacement on a small commercial gate starts around $1,100 and goes up depending on the operator type and control system. Free estimates, written pricing, and the number to call is (855) 360-5306.
Common Gate Repair Problems We See in Andover Homes
- Hinge post shift on shared property lines. Most Andover gates hang on fence lines that are also lot boundaries. When the post footing softens after heavy summer rain, the whole gate leans and starts dragging or swinging into the neighbor’s side. We reset the post without encroaching on the adjacent property.
- Rust and corrosion from salt air. Homes near the Miramar boundary and points east of 33023 get enough salt in the air to eat through iron hinges and steel gate frames within a decade. Regular greasing slows it, but once the metal is thin, the fix is weld repair or targeted replacement of the rotted sections.
- Slide opener strain from tight setbacks. Andover’s driveways are narrow. When a slide gate doesn’t have room to travel cleanly, it drags against a fence post or starts wearing the rack teeth unevenly. The operator then works harder, overheats, and trips. We fix the gate path, not just the circuit board.
- Safety photocell misalignment after storms. Hurricane-season wind and settling ground knock photocells out of alignment, which causes the gate to refuse to close or beep constantly. That’s usually a quick fix, but it’s also a sign the mounting post has moved. We check both.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Andover, FL
A straightforward hinge repair or gate realignment in Andover runs $120 to $280, including the service call. Electric gate repairs, like a failed control board or a Limit switch replacement, typically run $180 to $420. Slide operator repairs and rack and pinion realignment tend to land between $250 and $550, depending on how far the gate path has drifted and whether the post needs resetting. Weld repairs run $150 to $450 for typical rust and hinge work, and a full operator replacement can start around $900 for a residential swing or slide opener. Everything is quoted and agreed before work starts. Call (855) 360-5306 for a free estimate, and we’ll give you the number before any work begins.
We Also Serve Cities Near Andover
Archway Gate Repair serves all of Andover and the surrounding South Florida communities, including Andover itself, plus Carver Ranches, Miramar, West Park, and Hollywood. If your gate sits on a shared line in any of these ZIPs, our Gate Repair team knows the same setback and corrosion issues that shape the work.
Serving Andover, FL — Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Andover
Because the problem is almost never the hinge itself. In Andover, most gates are hung on posts that sit on property boundaries, and those posts lose footing support as the ground settles and saturates through storm season. Tightening the hinge doesn’t fix a post that’s leaning. The fix is resetting the post and then re-hanging the gate square. We do that routinely in 33023, and we’ll make sure the repair doesn’t push the gate onto a neighbor’s side of the line. Call (855) 360-5306 to have us look at the post, not just the hinge.
A properly protected gate will stop and reverse when it meets resistance, and it will have working photocells that keep it from closing on a person, car, or pet. If your gate pushes through resistance, or if the photocells are dirty, cracked, or misaligned, the entrapment protection is compromised. After storm season in Andover, misaligned photocells are one of the most common findings on our service calls. We test every safety function as part of any electric gate repair. Call (855) 360-5306 to schedule a safety check.
It is common in Andover, but it is not normal operation. Heat makes the motor work harder, and when the gate is already dragging against a tight setback or a misaligned rack, the extra load pushes the operator past its thermal limit. The operator strains, the gate moves slower, and eventually the board faults. The real fix is correcting the gate path and alignment so the motor isn’t fighting to move it. We diagnose the drag first, then the electronics. Call (855) 360-5306 and we’ll find the actual source of the strain.
Yes, and this is the core of gate work in Andover’s 33023 pocket. We reset hinge posts and realign gates without moving the operating footprint onto the neighbor’s side. We know the fence lines, the setbacks, and the property boundaries that shape these repairs, and we keep the gate swinging or sliding within the owner’s lot. It’s a property-line job, not just a hardware job. Call (855) 360-5306 and we’ll assess the boundary situation before we touch anything.
Check the post footings, the latch, and the operator’s reversing function before the first named storm. In Andover, wind loads and saturated ground are what pull posts out of plumb and break latches, which is why we see a rush of post-storm realignment calls every summer. A gate that’s already misaligned or latched poorly will fail during a storm. We can pre-season the gate: reset loose posts, weld weak joints, and confirm the opener’s safety and clutch settings. Call (855) 360-5306 before the storms arrive.
Call Archway Gate Repair for Andover Service
If your gate is dragging, stuck, or refusing to open in Andover, call (855) 360-5306. We’ll diagnose it over the phone when we can, schedule a visit that fits your lot’s constraints, and give you a written quote before any work starts. Nelson Arrieta and the Archway Gate Repair team work on the gate already on your property, repair first, and only recommend replacement when the metal or the operator has genuinely reached the end of its life. From the motor to the hinge, we handle it.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Andover and all of South Florida.