Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Bonita Springs
Gate repair in Bonita Springs comes down to two things: knowing the hardware and knowing the salt. A gate operator three miles inland from the Gulf ages differently than one near Bonita Beach, and a wide farm gate east of I-75 strains posts in ways a Pelican Landing courtyard gate never will. We’re Archway Gate Repair, and we work on gate systems throughout Bonita Springs every week, from the gated communities off US-41 to acreage entrances past Bonita Grande Drive. If your gate is stuck open, grinding, sagging, or dead after last night’s storm, call (855) 360-5306 and we’ll diagnose it over the phone before we ever dispatch a truck.
Why Archway Gate Repair Is Bonita Springs’ Preferred Gate Repair Company
Bonita Springs homeowners keep calling us back for one reason: we recognize the gate already on their property before we pull into the driveway. LiftMaster, FAAC, BFT, Linear. If it’s installed in this part of Lee County, we’ve probably repaired a dozen of the same model this season. Nelson Arrieta built Archway on a repair-first philosophy, and that means we show up to fix, not to sell replacements. Our Gate Repair team handles the full system, from the motor to the hinge, including electric gates, hydraulic arms, safety loops, and welded steel frames. In Bonita Springs, where HOA gates are the front door for hundreds of homes, our response time matters. We dispatch technicians familiar with the zip codes from 34133 through 34136, and we carry surge-protection boards and corrosion-rated parts on the truck because we know what this climate does to gate hardware. Repair first, replace only when necessary. That’s the whole approach.
Styles & brands we work with
Wrought Iron Gate Repair in Bonita Springs
Wrought iron gate repair in Bonita Springs is as much about preserving the look as it is about restoring function. Many of the Mediterranean-style villas and coach homes built in the 1990s and 2000s across gated communities like Pelican Landing and Spanish Wells feature ornamental iron entry gates that have been through 20 to 30 Florida summers. The common issues here are rust at the hinge welds, hairline cracks where the scrollwork meets the frame, and sagging caused by worn hinge pins or a failing post. A typical wrought iron gate repair in Bonita Springs runs $275 to $620 depending on whether we’re re-welding a cracked joint, replacing hinge hardware, or straightening and reinforcing the frame. For rust repair at the bottom rail, where sprinkler overspray and salt air do the most damage, expect another $120 to $200 per affected section.
Hinge and Post Repair
The hinge is where iron gates fail first, especially on the heavier ornamental models. We remove the gate, inspect the post for internal corrosion, and weld in new hinge plates or replace the post anchor entirely if it’s compromised. On Bonita Springs properties south of Bonita Beach Road, we recommend sealed bearing hinges rated for salt exposure.
Weld and Rust Restoration
Surface rust on ornamental iron isn’t just cosmetic. Left untreated, it travels under the finish and weakens the steel. We grind affected areas, weld any fatigue cracks, and apply a rust-inhibiting primer and marine-grade topcoat that holds up against the onshore air.
Metal Gate Repair in Bonita Springs
Metal gate repair in Bonita Springs covers the heavier work: aluminum and steel sliding gates, cantilever gates on commercial properties, and wide tube-frame driveway gates on acreage east of I-75. These gates take abuse from wind load, salt air, and daily cycling, and the failure modes are usually structural. A typical metal gate repair in Bonita Springs falls between $350 and $850 when the work involves re-aligning a sliding gate, replacing rollers or track, or reinforcing a steel frame. When a post needs to be dug out and re-set in concrete, expect $400 to $700 per post depending on depth and access. For galvanized steel gates near Bonita Beach, we often find the track binding from corrosion; the fix is a cleaned or replaced track plus sealed rollers.
Gate Realignment and Track Work
Sliding metal gates bind for two reasons in this area: track debris from landscapers and corrosion swelling on the rail. We strip the track, clean and true the rail, and re-align the gate to eliminate the strain on the motor. On gated HOA entrances, this work has to happen fast, because one stuck gate blocks the entire community.
Steel Frame and Cantilever Repair
Cantilever gates fail at the counterbalance, and those failures look like the gate dragging at the far end. We inspect the internal frame, repair or reinforce the welds, and rebuild the roller carriage if it’s worn. This is routine work on Bonita Springs commercial and estate properties.
Common Gate Repair Problems We See in Bonita Springs Homes
- Lightning-fried control boards – Summer thunderstorm clusters hit the gated communities north of Bonita Beach Road hard. A nearby strike cooks the board and the entry gate goes dead. We replace the board, verify the photo-eyes survived, and add surge protection so it doesn’t happen again next month.
- Salt-air corrosion near the coast – Operators and photo-eyes within a mile of the Gulf corrode noticeably faster than those along US-41. We see rusted sensor housings and seized limit switches this close to the water constantly.
- Sagging wide gates on acreage – East of Bonita, long driveways mean wide, heavy farm gates on single posts. Post lean and hinge wear cause the latch side to drag, and by the time you notice, the motor is working double duty.
- Solar opener failure in rural areas – Properties without mains power at the gate rely on solar panels and deep-cycle batteries. After a rainy summer, panels are dirty, batteries are weak, and gates fail to cycle. We test the full 12V system, not just the battery.
Pricing for Gate Repair in Bonita Springs, FL
Here’s what gate repair actually costs in Bonita Springs, because we quote it the same way to every customer: a service call and diagnosis runs $89, and that’s credited toward the repair if we do the work. Control board replacement on common brands like LiftMaster or FAAC typically runs $350 to $720 installed. Photo-eye sensor replacement runs $95 to $180 per set. Hinge and post repair on a sagging iron gate runs $275 to $620. A full operator replacement for a residential swing gate typically lands between $1,200 and $2,800 depending on brand and weight rating. Commercial slide gate operators in Pelican Landing or Bonita Bay run higher, from $2,500 to $5,500 installed. Every quote is written, agreed to before we start, and includes parts, labor, and disposal. Call (855) 360-5306 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterTrusted Brands We Service in Bonita Springs
We work on the brand already on your property. That’s the Archway difference. Our technicians are trained on LiftMaster, FAAC, BFT, and Linear systems, which covers the majority of gates installed across Bonita Springs since the 1990s. We stock common control boards, photo-eyes, remotes, and hinge hardware for these brands in our service trucks, which means fewer return trips and faster turnaround for homeowners along the US-41 corridor. If your gate is a brand we haven’t mentioned, call us anyway. A gate is a gate, and we’ve likely repaired the operator inside it even if the badge says something else. Diagnosed, not guessed.
We Also Serve Cities Near Bonita Springs
Our Bonita Springs customers often ask if we go anywhere else in Lee and Collier County. We do. We regularly repair gates in Estero, Island Walk, Naples Park, and Pelican Bay. If your property sits between Bonita Springs and Naples, or east toward the Estero border, we’re already working in your area. Visit our Bonita Springs page for local coverage details and response times.
Serving Bonita Springs, FL — Our Local Coverage Area
We’re based in the Bonita Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Bonita Springs
Salt-laden onshore air is the answer. Operators within roughly a mile of the Gulf are exposed to airborne salt spray every single day, and that salt accelerates corrosion on circuit boards, terminals, and sensor housings. The fix is sealed, corrosion-rated hardware and surge protection, which we install as standard on coastal Bonita Springs repairs. Call (855) 360-5306 if your operator is already showing rust or failing intermittently.
In this 1980s-to-2000s buildout, it’s almost always a lightning-fried control board or rusted photo-eyes. The storm knocks out the board, and the gate defaults to open for safety. In Pelican Landing off US-41, our tech diagnosed a LiftMaster swing operator with both failures after a summer lightning cluster. We replaced the board, upgraded to sealed corrosion-rated photo-eyes, and added surge protection. Call us for a same-week HOA service appointment.
Yes. Solar gate openers run on a 12V system with a panel, charge controller, and battery bank. The usual culprit is a degraded battery or a panel that’s been shaded by oak growth. We test the full system and replace what’s actually failed, not the whole setup. This is common work for us on acreage off Bonita Grande Drive and east toward the county line.
Wide gates sag because the hinge post carries too much leverage. Over time the post leans, the hinges wear, and the latch side drags. We fix it by re-setting the post in a deeper concrete footing, replacing worn hinge hardware, and if needed, adding a wheel to the latch end. The gate itself is almost always salvageable. A post re-set runs $400 to $700 in Bonita Springs depending on depth and access.
Florida building code requires photo-eye sensors and an automatic reverse mechanism on all automatic gates, and gates installed after 2001 need to be UL 325 compliant. For guardhouse-free HOA entrances, this means working photo-eyes and a functioning reversing edge are not optional. We test every safety device on every repair and flag any gate that doesn’t meet current code. Call (855) 360-5306 if you’re not sure whether your gate passes.
Contact Archway Gate Repair in Bonita Springs
Your gate is the first line of entry for your home or community, and when it fails, you want a specialist who knows the exact model on your property. Archway Gate Repair serves Bonita Springs from Pelican Landing to Bonita Bay, from the beach corridors to the acreage east of I-75. Call (855) 360-5306 for a free estimate, and we’ll have a technician who knows your brand on the phone with you today.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Bonita Springs and surrounding Lee and Collier County communities.