Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Clewiston
Gate repair in Clewiston usually means one of two things: an agricultural slide gate that has stopped responding after a cane harvest run, or an older residential swing gate whose hinges and posts have given out in the humid lake air. Most repairs run $180 to $650 depending on whether we’re replacing a control board, rebuilding hinge posts, or clearing a track full of sugar-sand grit. We respond to Clewiston properties quickly, and we arrive knowing the gate brands already installed across Hendry County. Call (855) 360-5306 and we’ll get your gate diagnosed and back in service.
Why Archway Gate Repair Is Clewiston’s Preferred Gate Repair Company
Archway Gate Repair is a gate-only shop. That matters in Clewiston because the gate systems here are not the light aluminum driveway gates you see in suburban Florida. They’re heavy-duty slide and swing operators on ranch entrances, equipment yards, and cane haul roads, and they fail in specific, predictable ways. Our technicians work on LiftMaster, FAAC, BFT, and Linear systems every week, so when we pull up to a property off County Road 833 or down near Harlem, we already know what to check first.
We’ve repaired enough legacy operators around Lake Okeechobee to recognize the failure pattern before opening the control box. Corroded terminals from salt-laden humidity. Fried boards from summer lightning. Rollers bound with sugar sand. Nelson Arrieta built this company around diagnosing gate failures quickly and repairing rather than replacing whenever the numbers make sense. Our Gate Repair team carries boards, photocells, hinges, and rack sections for the most common brands on Clewiston properties.
Styles & brands we work with
Commercial Gate Repair in Clewiston
Commercial Gate Repair in Clewiston means servicing the heavy-duty operators that secure equipment yards, ranch entrances, and agricultural access points. These gates run more cycles in a month than most residential gates run in a year, and they’re exposed to cane-truck traffic, sugar sand, and corrosive lake air. A commercial gate failure doesn’t just delay a homeowner, it can stop haul operations entirely. We understand that urgency. When a slide gate on a cane haul road stops opening, we come out, diagnose the operator and track, and get it moving with the repair it actually needs, not a replacement quote by default.
Agricultural and Ranch Gate Systems
Clewiston’s agricultural properties run gates that are built for serious duty. Slide gates with rack and pinion drives, heavy swing gates on pipe posts, and operators that have been retrofit over the years. We repair gate operators, motors, control boards, safety loops, and the mechanical track hardware underneath them. Electric gate repair is a core specialty for us, not an add-on.
Equipment Yard Access Control
Security gates on equipment yards need to work every time. We handle the wiring, the safety sensors, the keypad and loop connections, and the physical gate itself. If the board on your LiftMaster or FAAC operator is failing intermittently, we’ll replace it with a compatible unit and confirm the safety edges and photocells are wired properly before we leave.
Iron Gate Repair in Clewiston
Iron Gate Repair in Clewiston almost always comes down to rust, weight, and post failure. The humid air near Lake Okeechobee accelerates corrosion on iron gates, especially at weld joints, bottom rails, and hinge mounts. Older iron swing gates were often hung on posts that were undersized for the gate’s weight and installed before modern safety requirements existed. We straighten sagging panels, rebuild hinge points, weld rusted sections, and reset posts in concrete where the footing has heaved or rotted.
Hinge and Post Rebuilding
When an iron gate drags on the ground or won’t latch, the problem is usually the post, not the panel. We cut out corroded hinge barrels, weld in new hinge plates, and reinforce posts with new concrete footings. On older Clewiston homes with original gates, this is often the difference between another three years and another twenty.
Weld and Rust Repair
Rust never sleeps in Clewiston. We grind back corrosion, weld in new steel where sections have thinned, and treat the repair so it doesn’t become next season’s weak point. If the gate is too far gone to weld safely, we’ll tell you straight, and we’ll quote a replacement gate rather than patching something that will fail again in a year.
Trusted Brands We Service in Clewiston
We work on the brand already on your property. That means LiftMaster operators on commercial slide gates, FAAC and BFT systems on residential and agricultural entrances, and Linear boards on older estate gates. Because we’re factory-familiar with these systems, diagnosis is faster, and we carry common boards, remotes, photocells, and limit switches so Clewiston customers are not waiting a week for parts to ship from Miami. When we come out to a gate in the 33440 area, we typically have what the job needs on the truck.
Common Gate Repair Problems We See in Clewiston Homes
- Control boards fried by lightning. Clewiston’s summer thunderstorms bring frequent power surges that take out operator control boards. On older LiftMaster and Linear systems, the board is often the first thing to go, and many legacy boards are no longer manufactured.
- Slide gate tracks packed with sugar sand. During cane harvest, trucks track sand and grit onto driveways and haul roads. It works into slide gate tracks and rollers, binding the gate and straining the operator until it trips or burns out the motor.
- Rusted hinges and corroded posts. The humidity coming off Lake Okeechobee carries salt that eats at iron gates and their hardware. Hinge pins seize, posts rot at the base, and the gate begins to sag and drag.
- Legacy operators without modern safety features. Many Clewiston gates were installed before entrapment protection became standard. These systems lack photocells and safety edges, and when the operator fails, retrofitting is sometimes a better investment than replacing the whole unit.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Clewiston, FL
Gate repair in Clewiston typically runs $180 to $650 for most mechanical and electrical fixes. Hinge and post repair on a residential iron gate usually lands between $250 and $450, depending on whether we’re replacing one hinge or rebuilding a post footing. Control board replacement on an older LiftMaster or FAAC operator runs $280 to $550 installed, including the board and labor. Full track clearing and roller replacement on a slide gate that has bound up with sugar sand costs $180 to $320. We quote every price up front and get your approval before any work starts. Call (855) 360-5306 for a free estimate on your specific gate.
We Also Serve Cities Near Clewiston
Our Gate Repair in Clewiston service covers the surrounding Hendry County and Glades-area communities. We regularly travel out to Harlem, South Bay, Belle Glade, and Belle Glade Camp for ranch gates, equipment-yard systems, and older residential gates that need the same specialist attention we give Clewiston properties.
Serving Clewiston, FL — Our Local Coverage Area
We’re based in the Clewiston area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Clewiston
Most older control boards from LiftMaster, Linear, and FAAC can be replaced with a current compatible board if the motor and gearbox are still sound. The deciding factor is whether the operator’s motor is drawing excessive current or the gearbox is worn. In Clewiston, where lightning surges are a regular occurrence, we often add a surge protector at the operator’s disconnect to keep a new board from frying in the next storm. If the motor is weak or the gearbox is leaking, replacement of the whole operator is usually the cheaper answer over time. Call (855) 360-5306 and we’ll tell you which path makes sense for your gate.
Sugar-sand grit from cane trucks gets tracked onto driveways and haul roads, and it packs into the track and roller assemblies. The rollers grind against it, the gate binds, and the operator draws more current trying to push through. We clear the track, clean or replace the rollers, and re-lubricate with a lubricant that doesn’t hold sand. On properties that run gates through every harvest, we recommend checking the track after each cutting cycle.
If your electric gate does not have photocells or safety edges that reverse the gate when it hits an obstruction, it does not meet modern safety requirements. Older gates on Clewiston ranches and older homes frequently lack these protections. We can retrofit photocells and safety edges onto most operators, including legacy LiftMaster, FAAC, and BFT systems, without replacing the entire gate.
Most sagging gates can be repaired. The issue is almost always the hinge post or the hinge hardware, not the gate panel itself. We rebuild the hinge points, reset the post in new concrete if it has heaved, and realign the gate so it swings freely and latches correctly. If the gate panel is rusted through at the hinge rail, we’ll weld in new steel or tell you honestly when a replacement panel is the better investment.
Yes. Agricultural slide and swing gates on cane haul roads are a major part of our Clewiston work. These are heavy-duty gates with rack and pinion drives, heavy pipe posts, and operators that run many cycles during harvest. We repair the operator, the track, the rack, and the safety loops, and we schedule around your harvest windows because we know the gate cannot be down when the cane is moving. Call (855) 360-5306 and tell us what’s failing; we’ll get someone out.
Get Your Clewiston Gate Repaired Today
If your gate is binding, sagging, or not responding, call Archway Gate Repair at (855) 360-5306. We diagnose before we quote, we repair before we recommend replacement, and we get your gate back in service quickly. Nelson Arrieta and our team work on the gate systems Clewiston actually has, from cane-road slide gates to older iron swing gates in town. Free estimates, upfront pricing, and no work starts until you approve the number.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Clewiston and the Lake Okeechobee agricultural region.