Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Fort Myers Beach
Gate repair in Fort Myers Beach usually costs between $185 and $450 for common fixes like hinge replacement, realignment, or operator programming, and we can typically have a technician on the island within 24 to 48 hours. Salt air changes everything here. A gate that would run fine for seven years in Naples fails in three on Estero Boulevard. If your gate is sagging, binding, or the operator just stopped responding, call (855) 360-5306 and we’ll diagnose it properly.
We know Fort Myers Beach because we work here regularly. The canal-side streets off Estero Boulevard, the condos near Times Square, the stilt homes along San Carlos Island and the 33931 corridor. Every job we take is a gate job. That focus means we arrive already knowing what to look for, from the hinge to the control board.
Why Archway Gate Repair Is Fort Myers Beach’s Preferred Gate Repair Company
Fort Myers Beach property owners call us because we speak the language of their specific hardware. We’re factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Before we pull up to a home off Donora Boulevard or a community entry on Estero, we already know that operator’s failure points. Diagnosed, not guessed.
Our Gate Repair team works on both residential and commercial systems across the island. From the motor to the hinge, we cover the full gate ecosystem under one roof. Electric gate repair is a core specialty here, not an add-on we refer out. Wiring, control boards, safety loops, motors. If it makes the gate move or stops it from moving, we handle it.
Nelson Arrieta leads our team with a repair-first philosophy. We don’t show up with a replacement quote in our back pocket. We look for the honest fix first. Sometimes that’s a $40 hinge. Sometimes it’s a control board. Either way, you’ll know the number before we start. That approach has built a strong local reputation from Harlem Heights down to the south end of the island.
Styles & brands we work with
Key Takeaways
- Gate repair in Fort Myers Beach typically runs $185 to $450 for most common fixes, with full operator replacement higher.
- Salt air cuts hardware life by more than half compared to mainland Florida, making stainless upgrades standard practice here.
- Post-Ian rebuilds frequently mix new gates with old, out-of-plumb posts, a leading cause of repeat operator faults.
- We service nine major gate brands and keep the diagnosis in-house, no subcontracting.
- Free estimates. Call (855) 360-5306 and we’ll give you a firm number before any work begins.
Driveway Gate Repair in Fort Myers Beach
Driveway Gate Repair on Fort Myers Beach almost always starts with the same question: is the post still plumb, or did Hurricane Ian lean it two degrees and nobody noticed? Most residential driveway gates here are aluminum swing or slide gates mounted on posts that may have been reset in a hurry after the storm. When a post is even slightly out of vertical, the gate binds at the latch, the wheels wear unevenly, and the operator eventually faults out. We fix the gate and the geometry it hangs on.
Operator Diagnosis and Limits
When a Fort Myers Beach homeowner calls about a gate that runs a few cycles and stops, we check the operator limits first, then the load. On an island where salt has been working on the hinges for two seasons, the motor is often pulling more amps than it should. Replacing hinges with 316 stainless and reprogramming the limits solves most of those calls without touching the motor at all.
Expect to pay $150 to $320 for limit reprogramming, hinge replacement, and realignment on a typical residential driveway gate in Fort Myers Beach. If the operator itself needs replacing, a new LiftMaster or FAAC unit with installation usually lands between $850 and $1,600 depending on the model and whether we’re reusing the existing rack or chain.
Post Reset and Remount
For gates that sag visibly or leave a wider gap at the top than the bottom, the post has moved. We saw this constantly after Ian, especially on rebuilt stilt homes where the contractor set new gates on the original pipe posts. We re-plumb the post in concrete, shim the hinges, and rehang the gate so the operator isn’t fighting gravity on every cycle. That fix runs $250 to $500 before any new hardware.
Gate Welding in Fort Myers Beach
Gate Welding on Fort Myers Beach is mostly about corrosion repair. Salt-laden air from the Gulf gets into every pinhole in the paint and starts working on the steel underneath. The bottom rail of a slide gate is usually the first to go, especially on canal-side properties where salt spray is constant. We cut out the rotted section, weld in fresh material, and refinish it in a marine-grade coating that actually holds up on the island.
Bottom Rail and Gate Frame Repair
A typical bottom rail weld repair on a Fort Myers Beach driveway gate runs $200 to $450, depending on how far the rot has crept into the vertical stiles. If the entire gate frame is compromised, we’re honest about it. Repair first, replace only when necessary. Sometimes a new powder-coated aluminum frame is the smarter money, and we’ll tell you that before you spend on a patch.
Hinge Tab Re-welding
Hinge tabs snap or tear away from the gate frame more often here than anywhere else we work. Salt corrosion thins the steel around the weld, and the constant onshore wind stresses the connection. We weld new tabs, fishplate the area for reinforcement, and switch the hinge pins to stainless. That job typically costs $150 to $350, and it’s one of the most common repairs we do on this island.
Trusted Brands We Service in Fort Myers Beach
We work on the brand already on your property. Most Fort Myers Beach communities have LiftMaster or FAAC operators on their entry gates, and plenty of mid-rise condos on Estero run BFT or DoorKing. Homeowners with older swing gates often have Mighty Mule or Ghost Controls boards that were installed years ago and never touched until the salt got to them. Because we know these systems well, we keep common boards, safety edges, and receiver parts in stock on our trucks so a single trip is usually enough. Electric gate back online, not two weeks waiting on a part.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Fort Myers Beach Homes
- Seized hinges from airborne salt: Even gates set well back from the water get hit by salt that rides the breeze across the whole island. Hinges that would turn freely inland become stiff and noisy within two years, and the gate eventually binds hard enough to trip the operator.
- Operator faults on post-Ian rebuilds: When new gates get hung on old, storm-bent posts, the geometry is wrong from day one. The operator runs a few cycles, senses excessive force, and faults out. We re-plumb the post and reset the limits instead of just clearing the error.
- Rotted bottom rails on slide gates: Salt spray and standing water after summer squalls eat the lower rail of slide gates faster than any other component. We see pinhole rust within a year and structural weakness by year three, especially on canal-side streets off Estero Boulevard.
- Dead safety edges and photoelectric sensors: Coastal humidity and salt air corrode the connectors and housings on entrapment protection devices. A gate that won’t close or reverses for no reason is often a failing safety edge, not a bad motor.
Pricing for Gate Repair in Fort Myers Beach, FL
Here’s what we actually charge on this island. A hinge replacement on a swing gate usually runs $185 to $280. Realignment with new hinges lands between $220 and $400. Operator reprogramming and limit setup runs $150 to $250. Full operator replacement with a new LiftMaster or FAAC unit ranges from $850 to $1,600 installed. Re-welding a rotted bottom rail costs $200 to $450. Every quote is agreed in writing before we touch a tool, and estimates are free.
Call (855) 360-5306 and tell us what your gate is doing. We’ll give you a straight answer and a firm price range for Fort Myers Beach before we schedule anything.
We Also Serve Cities Near Fort Myers Beach
Our service area includes Fort Myers Beach and the surrounding communities: Harlem Heights, Iona, Punta Rassa, and Cypress Lake. If your gate is on the island or just off the bridge, we can get a technician out to you quickly.
Serving Fort Myers Beach, FL — Our Local Coverage Area
We’re based in the Fort Myers Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Fort Myers Beach
Because Fort Myers Beach is a barrier island with no inland buffer, airborne salt reaches every gate on the island, not just those directly facing the water. Hinges and operator boards corrode in two to three years here, compared with five to seven typical on the mainland. The fix is 316 stainless hardware and marine-grade coatings, which is what we install on every coastal job.
Yes, and on Fort Myers Beach it often is. After Hurricane Ian, we were called to a rebuilt home off Estero Boulevard where the new aluminum swing gate had been hung on the original, storm-bent hinge post. The operator, a LiftMaster, ran a few cycles then faulted out. We re-plumbed the post, replaced the galvanised hinges with 316 stainless, and reprogrammed the limits. No more binding. Two other companies had just adjusted the operator and left. If your gate is hung on an old post, no amount of limit adjustment will fix it. Call (855) 360-5306 and we’ll check the geometry first.
316 stainless steel hinges and hardware are the standard we recommend for Fort Myers Beach. Galvanised steel corrodes within a couple of seasons here, and painted mild steel starts to fail even faster. Powder-coated aluminum gates hold up well, but the hardware, hinges, and mounting brackets need to be stainless or marine-grade. We stock 316 stainless hinges and hardware for this exact reason.
Yes. Florida requires entrapment protection on automated gates, and Fort Myers Beach’s coastal environment is hard on those safety devices. Salt air corrodes connectors, humidity shorts out photoelectric sensors, and safety edges wear quickly in direct sun and salt spray. A gate that reverses on its own or won’t close is often a failing safety edge, not the motor. We test and replace them as part of every electric gate repair. Call (855) 360-5306 to schedule a free inspection.
It depends on what failed and why. Many post-Ian rebuilds on Fort Myers Beach are still under manufacturer warranty for the gate and operator themselves, but corrosion and improper installation are usually excluded. If your installer hung a new gate on an old post, the warranty won’t cover the realignment. We’ll tell you honestly what’s covered and what isn’t before any work starts, and we’ll give you a written quote for the uncovered portion. Call (855) 360-5306 for a free estimate.
Contact Archway Gate Repair in Fort Myers Beach
If your gate is sagging, seized, or the operator won’t run, call us at (855) 360-5306. We’ll get a technician out to Fort Myers Beach, diagnose the actual problem, and give you a firm price before any work starts. Free estimates, repair first, and hardware that actually lasts on this island. Nelson Arrieta and the team at Archway Gate Repair are ready when you are.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Fort Myers Beach and the surrounding Florida Gulf Coast.