Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Moore Haven
Gate repair in Moore Haven usually costs between $180 and $650 depending on what failed, and most jobs can be diagnosed the same day we arrive. If your gate is sagging off its hinges, stalling halfway open, or the operator just hums and sits still, call Archway Gate Repair at (855) 360-5306. We work on the brand already on your property, and we’ll tell you the price before any work starts.
Moore Haven isn’t a sprawling suburb. It’s a small, rural town on the southwest shore of Lake Okeechobee where driveways run long through sandy lots and the canal is never far away. That changes how gates fail and how they need to be fixed. We know the difference between a hinge problem and a post that’s sinking into wet ground, because we see both every week across the 33471 area.
Why Archway Gate Repair Is Moore Haven’s Preferred Gate Repair Company
Nelson Arrieta built Archway Gate Repair around one principle: diagnose the gate, not guess at it. That’s why our Gate Repair team carries brand-specific parts for LiftMaster, FAAC, BFT, and Mighty Mule systems on the truck. We’re not a handyman service that occasionally looks at a gate. Gates are all we do.
Moore Haven property owners call us because the soil here creates problems generalists don’t recognize. A post that looked fine in March can be leaning by August. An operator pad that sat level for years can start flooding after two heavy summer storms. When we see a gate dragging on a shell driveway near the lake, we check the post footing before we touch the panel. That’s local knowledge earned on the ground, not read from a manual.
We serve the full Moore Haven area, including rural lots off US 27, canal-side homes along the rim canal, and working farm entrances east toward Clewiston. Estimates are free, and the price we quote is the price you pay.
Styles & brands we work with
Metal Gate Repair in Moore Haven
Metal Gate Repair in Moore Haven often starts with the post, not the panel. Sandy, low-lying lots near the lake and canals let hinge posts settle and shift, so a steel or aluminum gate drags on the ground long before the welds or fasteners fail. We re-set the post, re-level the gate, and repair or replace hinges and weld points so the gate opens clean again. Typical metal gate repair on a Moore Haven property runs $220 to $520, depending on whether the post needs lifting and re-setting or just the panel hardware needs work.
Hinge and Post Repair
A sagging metal gate on a rural lot almost always traces back to the post. We pull the gate, dig out the old footing, re-set the post in properly compacted fill, and hang the gate so it clears the grade. If it’s a wide farm entrance, we check the full swing arc before we bolt anything down.
Weld and Rust Repair
Lake air and summer humidity punish bare steel. We grind out rust, weld cracked joints, and re-coat the repaired area so it holds up through hurricane season. If the panel is too far gone, we’ll tell you honestly and quote a replacement instead of patching something that won’t survive the next storm.
Wood Gate Repair in Moore Haven
Wood Gate Repair in Moore Haven is less common than metal work, but the wooden gates we do see are usually on older single-family homes or canal-side properties where the owner keeps the original look. The usual failure is the same as metal: the hinge post rots at ground level or the gate frame twists in the heat and humidity. Repair work typically runs $180 to $400 depending on whether we’re replacing rotted frame members, re-hanging the gate, or both.
Frame and Hinge Rebuild
Moore Haven’s wet summers rot gate frames from the bottom up. We cut out the rotted section, sister in new pressure-treated stock, and re-hang the gate on heavy-duty hinges rated for the weight. The gate keeps its original look but doesn’t sag the way it did.
Gate Realignment
When a wood gate rubs or won’t latch, the frame has usually twisted. We re-square the panel, adjust the hinge placement, and set the latch so it catches cleanly. On a shared driveway or right of way, we’ll also check that the swing arc doesn’t block the neighbor’s access.
Trusted Brands We Service in Moore Haven
Archway Gate Repair works on the brand already on your property. We’re factory-familiar with nine major gate systems including LiftMaster, FAAC, BFT, DoorKing, and Mighty Mule, plus Linear, Viking, and Ghost Controls operators. That means when a Moore Haven customer describes the problem over the phone, we usually know the likely failure point before we even drive out. We keep common parts on the truck, so a same-day fix is feasible for most operator and hinge failures in the 33471 area.
Common Gate Repair Problems We See in Moore Haven Homes
- Post settlement from sandy, wet soil. Hinge posts near the lake and canals sink and lean, which makes swing gates sag and drag. Fixing the gate without fixing the post is a temporary patch.
- Storm-season corrosion on operators and rack-and-pinion systems. Humidity and standing water after summer storms cause bind-ups and limit failures on slide gates. We clean, re-lubricate, and rust-proof the moving parts so the operator stops fighting the track.
- Slide gate retrofits on tight shared driveways. Many Moore Haven lots don’t have room for a swing gate’s arc. We retrofit slide gates into narrow rights of way, setting post footings in whatever restricted space the property allows.
- Solar gate opener failures on rural farm entrances. Long gravel and shell driveways on working agricultural properties often run solar operators. Battery health, panel angle, and charge controller issues are the usual culprits, and we test the whole chain rather than swapping parts blindly.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Moore Haven, FL
Gate repair in Moore Haven runs a wider range than you’ll see in a planned subdivision because the properties vary so much. Hinge and post repair on a standard driveway gate runs $220 to $520. Operator repair, including control board or limit switch work, runs $280 to $650. Wood gate frame rebuilds run $180 to $400. Slide gate track realignment on a shell driveway runs $300 to $600 depending on how much the track has shifted and what the post footings look like.
What changes the price is the post. A post that’s sunk into wet sand costs more to fix than a gate that just needs new hinges. We’ll tell you exactly what you’re paying before the first tool comes off the truck. Call (855) 360-5306 for a free estimate at your Moore Haven property.
We Also Serve Cities Near Moore Haven
Archway Gate Repair handles gate work across the Lake Okeechobee region. We regularly serve Gate Repair in Moore Haven and the surrounding communities of Port LaBelle, LaBelle, Clewiston, and Harlem. If your property sits on the edge of town or off US 27, you’re still in our service area.
Serving Moore Haven, FL — Our Local Coverage Area
We’re based in the Moore Haven area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Moore Haven
We fix whichever one failed, and in Moore Haven it’s usually the post. Sandy, low-lying soil near the lake lets hinge posts settle and tip, which makes the gate panel drag even if the panel itself is sound. We’ll re-set the post and re-hang the gate before we recommend replacing anything. Call (855) 360-5306 and describe what you’re seeing; we’ll give you a straight answer.
Often it won’t, and that’s a common reason we retrofit slide gates in the 33471 area. A swing gate needs room for its arc, and tight shared driveways or rights of way don’t have that space. A slide gate runs along the fence line instead, so it works in much narrower openings. We’ll measure the site and tell you honestly which option fits before you spend anything.
By protecting the moving parts from water and wind before the storm hits. We check post footings, re-level operator pads that have settled into wet ground, seal control board enclosures, and rust-proof chains, hinges, and rack-and-pinion systems. Gates near the lake and canals take more punishment than inland properties, so pre-season maintenance is worth it. Call (855) 360-5306 to schedule a check.
Yes, we service solar gate operators, including the charge controllers, batteries, and panel wiring. Rural farm entrances east of town often run entirely on solar, and when the gate stops opening it’s usually a dead battery or a controller that isn’t charging properly, not the motor itself. We test the whole power chain and replace only what’s actually failed.
Yes, we keep the gate usable whenever the repair allows it. We rebuilt a slide gate at a canal-side home off a shell driveway in the 33471 area where the old post footing had sunk into the sandy grade and the rack and pinion was dragging and stalling the LiftMaster operator. We pulled and re-set the post footing, re-leveled the track, and rust-proofed the chain and hinges so the gate could run clear of standing water after summer storms while the homeowner kept vehicle access through a temporary swing. If your gate has to stay functional during the work, we’ll plan around that from the first visit.
Call Archway Gate Repair in Moore Haven
If your gate is sagging, stalling, or dead, call Archway Gate Repair at (855) 360-5306. We’ll diagnose the actual problem, quote the repair honestly, and fix it right the first time, from the motor to the hinge. Serving Moore Haven and the surrounding Lake Okeechobee communities with free estimates and upfront pricing on every job.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Moore Haven and the Lake Okeechobee area.