Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across North Miami
Gate repair in North Miami usually comes down to two things: older hardware that’s finally given out, and salt air that never stops working against metal. We’re Archway Gate Repair, and we’ve spent years fixing both. Our team works on the gate already on your property from the motor to the hinge, and we service the brands installed across North Miami homes and commercial properties, including LiftMaster, FAAC, and Mighty Mule. We know the streets here, from NE 125th Street up to the Griffing Park area, and we answer calls at (855) 360-5306 with a straight diagnosis, not a guess.
Why Archway Gate Repair Is North Miami’s Preferred Gate Repair Company
North Miami property owners call us because we’re a gate-only specialist. We don’t do fences on the side, we don’t do garage doors, and we don’t send a general handyman to look at your control board and shrug. When a gate in the 33161 area won’t open, or a swing gate drags after a storm, we already know what brands are likely involved before the truck rolls up. That brand familiarity means faster diagnosis on LiftMaster operators, FAAC rams, BFT control boards, and Mighty Mule solar units. Our Gate Repair team has handled hundreds of North Miami service calls, from small apartment buildings east of I-95 to single-family ranch homes built in the 1960s with original wrought iron gates. Local reviews consistently mention that we showed up when we said we would and fixed the actual problem, not the most expensive one. For anyone searching Gate Repair in North Miami, the difference between a specialist and a generalist is the difference between one visit and three.
Styles & brands we work with
Commercial Gate Repair in North Miami
Commercial Gate Repair in North Miami often means an access gate that can’t stay down because the control board died, or a cantilever slide gate that’s binding after the last storm shifted its posts. Property managers and HOA boards in North Miami call us for gates on apartment buildings along NE 6th Avenue, retail plazas near Biscayne Boulevard, and municipal lots where the gate cycles hundreds of times a day. A typical commercial gate repair in this market runs $400 to $2,800 depending on whether we’re replacing a hinge post footing, rewiring a ramp, or swapping a failed VFD drive. We quote the job before any work starts, and we repair first. Replacement gets proposed only when the existing gate can’t be brought back to safe, reliable operation.
Access Control and Operator Diagnosis
Most commercial gate failures in North Miami are electrical before they’re mechanical. We see rusted terminal blocks, shorted loop detectors, and control boards that have been patched so many times the faults are layered. Our process starts at the operator: verify incoming voltage, test the board outputs, then move outward to safety loops, keypads, and the physical gate track. We carry replacement boards and safety edges for common commercial systems, so many repairs happen in a single visit.
Post and Track Work for Slide and Cantilever Gates
After a tropical storm, North Miami’s sandy soil lets posts settle even when the gate itself is undamaged. That creates a bind in the track or a panel that doesn’t close square against the guide rollers. We re-anchor posts with deeper footings and compacted aggregate rather than just shimming the gate and hoping. Cantilever gates especially need the frame squared at the post, because a half-inch out of plumb becomes a full panel failure within a season.
Iron Gate Repair in North Miami
Iron Gate Repair in North Miami is a preservation job as much as a repair job. The 1950s through 1970s housing stock here left a lot of original wrought iron and steel gates still hanging today, many with decades of salt-laden Atlantic air worked into the joints and hinges. We weld cracks, cut out rusted pickets, repair or replace hinge barrels, and re-hang the gate so it swings true. Depending on the damage and whether we need to fabricate replacement sections, a North Miami iron gate repair typically runs $250 to $1,400. Structural cracks at the hinge stile cost more than surface rust remediation, and we’ll tell you before we start which one you have.
Rust Remediation and Reinforcement
On a 1960s North Miami home near the bay, the bottom rail of an iron gate is usually the first thing to go. Salt spray and standing water from afternoon storms work the metal from the inside, and by the time you see flaking paint, the rail often has pinholes. We grind back to clean steel, weld in reinforcing stock where the rail still has good metal, and coat with a zinc primer before repainting. If the rail has lost more than a third of its material, we’ll say so plainly and give you a replacement price alongside the patch price.
Hinge Seizure and Realignment
Iron gates near the coast seize at the hinge long before the panel fails. Salt corrosion binds the pin inside the barrel, and the operator then works against the friction until the motor burns out. We free or replace the hinge assembly, re-lubricate with a marine-grade compound, and set the gate so the load stays on the pin, not the motor. The goal is an iron gate that opens by hand as easily as it opens on the operator.
Trusted Brands We Service in North Miami
We work on the brand already on your property, which matters in North Miami because so many gates here have been through two or three operators by now. We service LiftMaster repair in North Miami and FAAC systems daily, along with Mighty Mule solar units on back lots and residential driveways. Because North Miami homes tend to keep their original gates and swap only the operator, we stock control boards, limit switches, remotes, and safety eyes for these brands locally, cutting the wait time that comes from ordering parts out of state. You don’t need to rip out a working FAAC ram because a relay failed. We diagnose the board, not the brand.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in North Miami Homes
- Post-storm post sink and gate racking. After a tropical storm or even a strong summer squall, the sandy soil around a hinge post saturates and the post settles, dropping the gate so it drags on the apron. The panel and operator are often fine; the footing is not, and the repair is a re-anchor job, not an operator swap.
- Legacy control boards with no replacement parts. We regularly see LiftMaster and Linear operators from the 1990s and early 2000s still running the mechanical side perfectly while the control board has failed, and the manufacturer no longer makes the board. Sometimes a retrofit control package brings the operator back for a fraction of a new unit’s cost.
- Salt corrosion on hinges, tracks, and rack and pinion systems. Salt-laden Atlantic air works on iron and aluminum all year, not just in hurricane season. Hinges seize, slide tracks rust through, and rack teeth get eaten by corrosion before the gate body shows damage. We replace the worn component and protect the rest.
- Solar opener failures after the rainy season. A Mighty Mule solar unit that worked fine in April may be dead by October because the battery cooked or the panel shorted during months of humidity and cloud cover mixed with intense sun. Often the repair is a battery and controller swap, not a new operator.
Pricing for Gate Repair in North Miami, FL
A service call for gate repair in North Miami starts around $125 to $185 for the trip and diagnosis, and most repairs land between $250 and $1,400 once the actual work goes in. Hinge replacements and sag corrections typically run $250 to $600. Control board replacements on older operators run $350 to $900. A full post re-anchor with re-square of the gate runs $500 to $1,800 depending on how much excavation the sandy soil requires. Commercial work scales up from there. Every price is quoted and agreed before any work starts, and the estimate is free. Call (855) 360-5306 for an exact number on your gate.
We Also Serve Cities Near North Miami
Our gate repair service area covers North Miami and the surrounding communities along Biscayne Bay. We work in North Miami regularly, and we also take calls from Biscayne Park, Bal Harbour, Bay Harbor Islands, and Surfside. Owners in those areas get the same brand-specific diagnosis and the same repair-first approach. If you’re a few blocks outside the 33161 boundary, call and ask; we’re likely already working nearby.
Serving North Miami, FL — Our Local Coverage Area
We’re based in the North Miami area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in North Miami
The hinge post settled in the saturated sandy soil, not the gate panel. North Miami’s soil drains quickly, but a heavy storm saturates it enough that a 1960s-era post footing with a shallow concrete collar will sink a half-inch or more, and that drops the whole gate at the latch side. The panel is intact and the operator still runs; the post footing is the failure. The repair is to reset and re-anchor that post with a deeper footing, not to replace the operator. Call (855) 360-5306 and we’ll confirm it on site.
In most cases, yes. Operators that predate the current UL 325 entrapment standards can usually accept aftermarket safety photocells and contact edges wired into the existing control board, provided the board has auxiliary input terminals. If the board is too old and has no safety input, a retrofit control package can bring the operator into compliance without scrapping the motor and gearbox. We’ll tell you honestly which path applies to your gate.
Repair is worth it if the gate’s structure is still sound at the rails and hinge stiles. Surface rust, seized hinges, and even broken pickets can be cut out and welded with new steel, then coated and painted, at a fraction of a new gate’s cost. If the bottom rail or hinge stile has lost more than a third of its material to rust-through, repair becomes temporary and a new gate is the cheaper five-year answer. We give you both numbers and let you decide.
It’s usually a repair. Mighty Mule and other solar openers that die after a wet North Miami summer have typically lost the battery or the charge controller, not the mechanical arm or ram. We bench-test the panel output, replace the battery or controller, and seal the housing so the next rainy season doesn’t kill it again. A full operator replacement is only needed when water has gotten into the gearbox or the board is corroded beyond salvage.
We prioritize storm-damaged commercial gates in North Miami because a shifted gate is a liability for every tenant and visitor on the property. For an access gate that’s off its track or bound at the post, we’re typically on site within 24 to 48 hours after the weather clears, and often same-day when the gate has failed closed or open. The post re-anchor and re-square work is usually done the same visit, with the gate cycled and verified before we leave.
If your North Miami gate is dragging, stuck, or dead, call Archway Gate Repair at (855) 360-5306. We’ll diagnose the actual failure, quote the price before any work starts, and repair the gate you already own whenever that’s the honest answer.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving North Miami and the surrounding communities.