Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Palm Beach Gardens
Gate repair in Palm Beach Gardens usually costs $185 – $480 for hinge, post, and weld work, and $350 – $1,200 for electric operator repairs, with most jobs done same week. If your gate is sagging, stuck, or leaving your community open after hours, call us at (855) 360-5306 and we’ll diagnose it over the phone before a truck rolls. Our Gate Repair team works on the brand already on your property, from PGA National to the HOA enclaves off Hood Road and Military Trail.
We cover Palm Beach Gardens, Lake Park, North Palm Beach, Palm Beach Shores, and Riviera Beach. Nelson Arrieta leads our service crew, and every estimate is free, quoted upfront, and agreed before any work begins.
Why Archway Gate Repair Is Palm Beach Gardens’s Preferred Gate Repair Company
We’re a gate-only shop. No fencing side work, no garage doors, no “we do it all” guessing. That focus matters in Palm Beach Gardens because the communities here run on gates: swing gates at golf club entrances, sliding gates at high-rise garages, overhead gates at HOAs, and pedestrian gates at pool enclosures. A general handyman sees a hinge. We see the brand of operator, the corrosion pattern on the post footing, and whether the control board is original to a 1990s install.
Customers in 33410 and 33418 call us because we already know the equipment on their property. LiftMaster swing operators off Tournament Boulevard, FAAC barriers at medical office plazas, BFT rams at condo garage entrances, Palm Beach Gardens Ghost Controls service retrofit kits on older ranch homes off Burns Road. We’ve worked on all of them, and we stock the common relays, hinges, and safety-edge components to get a Palm Beach Gardens gate back online without waiting on a supplier truck from Fort Lauderdale.
Our repair-first approach means we quote the fix, not the upsell. When a weld is still sound, we say so. When a hinge post is too far gone to save, we tell you that too, and we’ll install galvanized or stainless hardware so it lasts against the salt air instead of failing again in three years.
Styles & brands we work with
Iron Gate Repair in Palm Beach Gardens
Iron Gate Repair in Palm Beach Gardens is mostly a corrosion-control job. The salt-laden Atlantic air eats unprotected steel from the inside out, so what looks like a sagging gate is usually a hinge post or weld that has lost its structural integrity inches below the surface. We cut out the rotted section or replace the footing, weld in new steel, and finish with hardware spec’d for coastal exposure: stainless hinges, galvanized posts, and zinc-rich primer before paint.
Most iron gate jobs here run $220 – $480 when we’re repairing a hinge or weld. A full post replacement with new concrete footing runs higher, typically $600 – $950 depending on gate size and access. We quote the number before work starts, and that’s the number you pay.
What fails first
The bottom hinge is the first casualty in Palm Beach Gardens. It carries the full gate weight plus the leverage of every open-close cycle, and it sits where sprinkler water and salt air meet. Once the bottom hinge develops play, the gate drags or scrapes, and the top hinge gets pulled out of alignment. Waiting on that leads to cracked welds and a gate that needs full re-hanging instead of a $200 hinge job.
Hinge and weld work
We re-hang sagging iron gates and repair cracked or rusted welds on-site, usually in a single visit. If the post footing is corroded, we dig it out, set a galvanized post, and match the finish to the existing gate. Stainless fasteners are standard on every coastal repair we do; they cost a few dollars more and save a repeat call in three years.
Sliding Gate Repair in Palm Beach Gardens
Sliding Gate Repair in Palm Beach Gardens covers both cantilever and V-track slide gates, common on the high-rise condo garages and commercial properties along PGA Boulevard and U.S. 1. Salt air and blown sand get into the rollers and track, causing the gate to bind, grind, or stall. The motor and control board often outlast the mechanical components here, so we check the track alignment, roller condition, and limit settings before touching the electronics.
Expect $250 – $540 for roller, track, and chain repairs. If the gate needs a new motor or control board, the price moves to $400 – $1,200 depending on the existing system. We quote the job in writing and get your approval before any work starts.
Track and roller diagnosis
A sliding gate that shudders when it opens usually has flat spots on the rollers or debris packed into the V-track. We measure runout along the track, replace bad rollers with sealed or stainless units, and realign the gate so the motor isn’t fighting its own weight. The operator lasts longer when the mechanical path is clean.
Operator repairs on existing slides
We service Linear, Viking, and DoorKing slide operators, along with older FAAC and BFT units. Control-board failure, safety-loop faults, and limit-switch drift are the three most common calls we get from Palm Beach Gardens HOA managers. When a board is repairable, we repair it. When it isn’t, we replace with a direct-fit or retrofit unit rather than quoting an entire new gate.
Trusted Brands We Service in Palm Beach Gardens
We work factory-familiar with nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That’s not a list we read off a brochure; it’s the equipment already installed across Palm Beach Gardens, from the swing gates at PGA National to the slide gates behind Gardens Mall loading docks. For Palm Beach Gardens customers, that brand familiarity means we arrive with the right diagnostic approach and often the right part on the truck. No trial-and-error on your HOA’s time clock.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Palm Beach Gardens Homes
- Salt corrosion on hinge posts. The ocean air here corrodes unprotected steel posts in as little as five to seven years. Gates start sagging, dragging on the driveway, and pulling top hinges out of alignment. Galvanized posts and stainless hinges stop that cycle.
- Original 1980s operators finally failing. Many PGA National and HOA communities are still running the original swing gate operators from when the developments were built. Those units were never spec’d for today’s access-control load, and a retrofit is usually cheaper than ongoing patch repairs.
- Hurricane-season battery and bracing failures. The months before storm season bring a wave of calls: backup batteries dead, gates unsecured, bracing inadequate. We do pre-storm checks on hinges, posts, and operator power so residents aren’t locked in or locked out when winds hit.
- Misalignment at golf-community entrances. At high-traffic gates like those around PGA National, even a half-inch of sag can scrape a low car. We tune swing operators to millimeter precision and coordinate with HOA security to work during low-traffic windows so we’re not blocking the morning tee-time rush.
Pricing for Gate Repair in Palm Beach Gardens, FL
Here’s what gate repair actually costs in this market. Basic hinge and post repairs: $185 – $480. Weld repairs and re-hanging: $220 – $540. Electric operator diagnosis and repair: $350 – $1,200. Sliding gate track and roller work: $250 – $540. Full post replacement with new concrete footing: $600 – $950. These ranges cover typical Palm Beach Gardens residential and light-commercial gates; larger custom iron gates or commercial slide gates run higher, and we’ll tell you exactly why before you commit.
What moves the price: gate size and weight, corrosion severity, operator age, and whether we’re matching an HOA’s existing finish. We give free estimates, quote the full number before any work begins, and never surprise you with a change order halfway through. Call (855) 360-5306 for an exact number on your gate.
We Also Serve Cities Near Palm Beach Gardens
Our service area covers Palm Beach Gardens and the surrounding communities, including Lake Park, North Palm Beach, Palm Beach Shores, and Riviera Beach. If your property is on the line between cities, call us and we’ll confirm coverage. For a full overview of our coverage area and service details, see our Gate Repair in Palm Beach Gardens page.
Serving Palm Beach Gardens, FL — Our Local Coverage Area
We’re based in the Palm Beach Gardens area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Palm Beach Gardens
Salt-laden Atlantic air deposits chloride on steel surfaces, which accelerates oxidation dramatically compared to inland areas. Hinges and post bases near sprinkler lines corrode fastest because the salt water concentration cycles with every irrigation run. We install stainless or galvanized hardware on every coastal repair so the fix outlasts the original. Call (855) 360-5306 if your gate is sagging at the corners.
Check three things: the operator’s battery backup, the hinge and post bracing, and the safety edges. A gate that can’t open during a power outage traps residents, and an unbraced gate becomes a sail in high winds. We offer pre-storm inspections for HOA and residential gates across 33410 and 33418. Call (855) 360-5306 to schedule one.
Not usually. A sagging swing gate is almost always a hinge or post problem, not a gate problem. We re-hang the gate, replace corroded hinges, and reinforce the post footing, which restores alignment for a fraction of a full replacement. If the steel itself has rotted through in multiple places, we’ll tell you honestly and quote a replacement that matches the community’s existing look.
Yes, and we do this regularly for gated communities built in the 1980s through 2000s. The original operators are often obsolete, but the gate structure and posts are usually sound. We fit a modern LiftMaster, FAAC, or BFT operator with current safety loops and battery backup, keeping the existing gate and entry design intact.
Because at high-traffic golf community gates, a gate that hangs even half an inch low can scrape a low-profile luxury car as it passes. At PGA National’s Tournament Boulevard entrance, we repaired a LiftMaster swing operator that was misaligning by half an inch due to a corroded hinge post footing, replaced the footing with galvanized steel and stainless hinges, and tuned the operator to millimeter precision. That level of adjustment prevents damage claims and keeps morning tee-time traffic moving. Call (855) 360-5306 if your community gate is scraping or catching.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Palm Beach Gardens and the surrounding communities.