Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Sebastian
If your gate is stuck open, sagging, or refusing to close, here’s the short version: gate repair in Sebastian usually runs $180 to $340 for hinge and alignment work, $300 to $700 for control board or motor replacement, and $900 to $2,400 for a full operator replacement in older systems. We get to Sebastian homes quickly, diagnose the actual failure, and quote the price before we touch a thing. We work on the brand already on your property, so you’re not paying for someone to learn on the job. Call (855) 360-5306 for a free estimate, and we’ll get you on the schedule right away.
Why Archway Gate Repair Is Sebastian’s Preferred Gate Repair Company
Sebastian isn’t like inland Florida. Gate systems on the river side of US-1 take a beating from salt mist off the Indian River Lagoon, and any repair shop that treats this town like it’s just another Brevard suburb is going to misdiagnose the problem. We see it all the time: a control board that looks fine from the outside is corroded inside from years of salt exposure, or a hinge post that’s been quietly sinking into sandy canal-front soil. Our techs know what to look for before they even open the panel, because they know Sebastian’s specific mix of older riverfront homes and newer gated-community entry systems. Diagnosed, not guessed.
Our reputation in Sebastian is built on showing up when we say we will and fixing the actual problem, not padding a quote with unnecessary replacements. We handle electric gate repair as a core specialty, which means motors, control boards, safety loops, and wiring are within scope, not referred out to a second company. From the motor to the hinge, we cover the full system.
Styles & brands we work with
Sliding Gate Repair in Sebastian
Sliding Gate Repair in Sebastian is one of our most common calls, especially for the older aluminum slide gates on the canal-front streets between US-1 and the lagoon. These gates have been fighting salt air since the 1970s and 80s, and the typical failure pattern is predictable: the rack and pinion wears unevenly, the gate sags on a sinking post, and the operator burns out trying to move a gate that no longer rolls true. A standard slide gate realignment in Sebastian runs $180 to $280. If the rack or rollers need replacement, expect $350 to $600. If the operator itself is done, you’re looking at $700 to $1,800 for a new motor and control board installed.
Alignment and Roller Work
Most slide gates that drag or shudder are misaligned, not dead. We level the gate, shim the rollers, and reset the rack so the operator isn’t fighting its own weight. This is one of the cheapest fixes that makes the biggest difference in how the gate sounds and how long the motor lasts.
Operator Recovery and Replacement
When a LiftMaster or FAAC slider operator quits, the first thing we check is whether the board survived or got fried. In Sebastian, salt corrosion plus summer power surges are the two most common killers, and sometimes the board can be replaced for $300 to $500 instead of swapping the whole unit for $1,200 or more. Repair first, replace only when necessary.
Wrought Iron Gate Repair in Sebastian
Wrought Iron Gate Repair in Sebastian means dealing with rust, because the lagoon’s salt mist doesn’t care how good the gate looked when it was installed. Drive gates on River Park Drive, Harbor Point, or any street east of Indian River Drive are in the worst of it, and the typical job involves sanding out rust at the weld points, reinforcing the hinge side, and repainting with a marine-grade coating. Basic rust remediation and hinge reinforcement on a wrought iron gate in Sebastian runs $250 to $450. If the gate needs realignment after rust damage or impact, add $150 to $250. A full re-weld and refinish on a larger double gate can run $700 to $1,300.
Hinge and Post Reinforcement
Wrought iron is heavy, and when the post starts to move in sandy Sebastian soil, the hinges take all the abuse. We dig out and reset posts with a deeper concrete footing, then rebuild the hinge side so the gate hangs true. It’s a permanent fix, not a temporary prop.
Rust Remediation and Refinishing
Sebastian’s summer humidity plus the salt-laden onshore breeze means surface rust turns into structural rust faster than you’d think. We grind out the damage, re-weld any thin sections, and refinish with coatings meant for coastal environments. If the gate is too far gone, we’ll tell you honestly and show you replacement options.
Trusted Brands We Service in Sebastian
We’re factory-familiar with the brands already installed on Sebastian properties. That includes LiftMaster, FAAC, BFT, and Linear systems, which covers the bulk of what we see on both older riverfront homes and newer gated communities around Sebastian. Because we know each brand’s specific failure points, we can often tell what’s wrong from the symptom alone before we ever lift a screwdriver. We carry common parts in our vans for Sebastian calls, so a standard control board or safety sensor replacement often happens same trip. Electric gate back online, same visit.
Common Gate Repair Problems We See in Sebastian Homes
- Obsolete control boards in legacy operators. Older LiftMaster and Linear boards fail from salt corrosion and power surges during Sebastian’s summer afternoon storms. The board usually dies quietly, and the gate simply stops responding.
- Sagging gates from rotted or sinking hinge posts. Decades of salt exposure eat through aluminum posts where they meet the soil, and the gate tilts until it drags or jams. We see this constantly on canal-front and riverfront properties off Old Dixie Highway.
- Faulty photocells and loop detectors. Salt mist coats the lenses and connections, causing false triggers or dead spots in the safety system. This is why a gate might refuse to close or reverse for no reason.
- Intermittent keypad entry failures. Keypads on the river side of US-1 corrode internally from humidity and salt, so buttons stop registering reliably. It’s rarely the wiring, and usually the keypad itself.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Sebastian, FL
Here’s what we actually charge in Sebastian, based on the jobs we’ve done across 32958, 32976, and 32978. Hinge repair and realignment runs $180 to $340. Control board replacement runs $300 to $700 depending on the brand and model. A new operator for a slide or swing gate runs $900 to $2,400 installed. Rust remediation and re-welding on wrought iron runs $250 to $700. Weld repairs on aluminum run $150 to $400. The price you’re quoted is the price you pay, agreed before any work starts. The only thing that changes the number is what we find when we open the panel or dig out the post, and we’ll show you before we proceed. Call (855) 360-5306 for a free estimate in Sebastian.
We Also Serve Cities Near Sebastian
Our Gate Repair team covers Sebastian and the surrounding communities along the Treasure Coast and northern Indian River County. If you’re in Roseland, Fellsmere, Micco, or Wabasso Beach, we’ll send the same brand-familiar techs. Learn more about our local service area on the Gate Repair in Sebastian page.
Serving Sebastian, FL — Our Local Coverage Area
We’re based in the Sebastian area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sebastian
Yes, in most cases. We can take an older LiftMaster or Linear opener and add modern photocells, a new safety loop, and even a updated control board without replacing the whole operator. The retrofit on a typical Sebastian slide gate runs $350 to $700, which is a fraction of a full operator swap. If the existing board can’t support the new components, we’ll show you the part that can, and you’ll approve the price before we order anything. Call (855) 360-5306 to have us evaluate your operator.
Because the neighbor’s gate isn’t breathing salt mist. Gates on the river side of US-1 in Sebastian sit in a year-round salt-spray zone off the Indian River Lagoon, which causes control boards, hinges, and even keypad internals to corrode two to three times faster than the same gate two miles inland off Sebastian Blvd. The only way to fight it is with marine-grade coatings, sealed electronics, and a regular service schedule. We’ll set that up for your gate, not a generic one.
We can usually fix the panel and the post without replacing the gate. The sag is almost always the hinge post, not the aluminum itself, especially on older canal-front gates in Sebastian where sandy soil has let the post sink. We dig out and reset the post, realign the gate, and replace worn rollers or the rack as needed. Most of these jobs run $350 to $600 total, and only when the aluminum has cracked through or become too thin to weld do we recommend replacement.
We service LiftMaster, FAAC, BFT, and Linear as our most common four, and we’re also familiar with Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The brand already on your property is the one we’ll diagnose, because that’s the equipment already wired into your gate and keypad system. We carry common parts for all of them on Sebastian service calls.
Yes, usually. Keypads installed on the river side of US-1 in Sebastian corrode internally from salt humidity, and the membrane or contacts stop making clean connections. Sometimes it’s a simple cleaning, sometimes the keypad needs replacement at $150 to $300. We’ll know which one it is within a few minutes of opening it up. Call (855) 360-5306 and we’ll get you back on a working code.
Contact Archway Gate Repair for Gate Repair in Sebastian
If your gate is sagging, corroding, or just not responding, don’t spend another morning guessing. Our team works on the brand already on your property, quotes the price before any work begins, and treats every Sebastian gate like the salt-spray problem it is. From a hinge post on a canal-front slide gate to a control board on a River Park wrought iron swing, we’ll get it fixed right. Call (855) 360-5306 today for a free estimate, and you’ll know exactly what it costs before we start.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Sebastian and the surrounding Treasure Coast communities.