Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across West Hollywood
A failed gate in West Hollywood is usually one of three things: a hinge that gave out, an operator that lost power, or a post that shifted in saturated ground. Most repairs in the 33021 zip code run $185 – $425 for hinge and post work, and $240 – $520 when an electric motor or control board is involved. We typically reach West Hollywood homes within the same day for emergency calls, and we quote the full price before any work starts.
Archway Gate Repair works on the gate system already on your property. We don’t need to sell you something new to fix what’s failing. If you’re dealing with a gate that won’t open, sags, grinds, or tripped a breaker during last night’s storm, call us at (855) 360-5306. We’ll diagnose it, quote it, and repair it.
Why Archway Gate Repair Is West Hollywood’s Preferred Gate Repair Company
West Hollywood properties are different from what you’ll find a few miles west in Miramar or north in Hollywood. The lots are tighter. The setbacks are narrower. And the gates, many of them original to 1950s and 1960s construction, sit close enough to property lines that a repair touching a shared post becomes a conversation with the neighbor. We know this because we’ve worked in these exact conditions.
Our team has repaired gates across 33021 for years, from side-yard pedestrian gates on Funston Street to double-driveway swing gates near Taft Street. The homes here are mostly mid-century ranches and small multifamily buildings with a mix of chain-link, aluminum, and older steel gates. That housing stock has specific failure patterns, and we know them before we arrive.
We stay focused on one trade. Gates only. Electric operators, hinges, posts, locks, control boards, safety loops. If it’s part of a gate system, we work on it. If it isn’t, we don’t pretend to. That single-specialty focus means we carry the right parts, we know the right diagnostics, and we don’t burn a customer’s time while we figure it out.
Nelson Arrieta runs every job with a simple rule: diagnose first, quote second, repair only what needs repairing. That’s why West Hollywood homeowners call us back when the next issue shows up. It’s also why property managers along Sheridan Street keep our number saved.
Styles & brands we work with
Metal Gate Repair in West Hollywood
Metal Gate Repair in West Hollywood covers everything from sagging wrought-iron driveway gates to corroded aluminum side-yard gates that won’t swing cleanly. The salt-laden air rolling off the Atlantic weakens steel hinges and powder coatings faster than people expect, and the tight clearance of a 33021 side yard means even a quarter inch of sag can scrape or bind. A typical metal gate repair here runs $185 – $425 depending on whether we’re replacing hinges, reinforcing a post, or straightening and re-welding a frame.
Hinge and Post Replacement
When a metal gate sags in West Hollywood, the hinge plates have usually pulled away from the post or the post itself has shifted. On tight lots, that post often sits right on the property line, sometimes shared with a neighbor. We reset the footing, drill new anchor points, and install hinges sized for the gate’s weight and the wind load it has to survive.
Weld and Rust Repair
Rust eats steel gates from the bottom up in this climate, especially where sprinkler overspray hits the lower rail every morning. We cut out the compromised section, weld in a replacement, and treat the surrounding metal so the repair doesn’t become a rust magnet. For aluminum gates, the issue is usually electrolysis at the hinge, which we address with isolation bushings and proper fasteners.
Wood Gate Repair in West Hollywood
Wood Gate Repair in West Hollywood usually comes down to one thing: moisture. Wood gates on 1950s and 1960s ranches have soaked up decades of subtropical humidity, storm water, and irrigation overspray, which rots the stiles and bottom rails where they meet the ground. Expect to pay $220 – $480 for most wood gate repairs, including frame rebuilds, hinge upgrades, and realignment.
Stile and Frame Rebuilds
Most wood gates fail at the bottom rail first. The wood stays wet for days after a storm, the joints loosen, and the whole frame racks. We rebuild the stile with pressure-treated or cedar stock, re-mortise the joints, and coat the end grain before reassembly. That’s the part most general repairs skip, and it’s why they fail again in two seasons.
Sag Correction on Wood Gates
A wood gate that drags the ground has usually pulled its hinges free or bowed from its own weight. We straighten the frame with an anti-sag reinforcement, then re-hang the gate so it clears the grade by at least two inches. On West Hollywood lots where grades slope into side yards, we’ll also check the post for rot below the soil line and reset the footing if it’s soft.
Trusted Brands We Service in West Hollywood
Our Gate Repair team works on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, but honest diagnosis matters more than a logo on the housing. When a BFT board fails, we check the power supply before ordering anything. When a Viking actuator won’t move, we test the limit switches first. We keep common parts stocked locally so West Hollywood customers aren’t waiting on a shipment for a simple fix.
Common Gate Repair Problems We See in West Hollywood Homes
- Hinge post rot and footing failure: After heavy rain, saturated ground softens around post footings, especially on those shared property-line posts common in 33021. The gate sags, the latch stops lining up, and the operator strains until it burns out.
- Battery backup failure after storm outages: Most automatic gate operators have a battery backup that’s never been tested until the power goes out. After a storm, we routinely find dead batteries or failed charging circuits leaving gates stuck in whatever position they were in when the grid dropped.
- Corroded hinges and frozen hardware: Salt-laden air is relentless on exposed steel hardware in South Florida. Hinges freeze, rollers seize, and chain-drive mechanisms develop enough corrosion to trip their own overloads.
- Rack-and-pinion misalignment: On sliding gates, wind flex and ground movement knock the rack and pinion out of alignment. The gate shudders, skips teeth, or refuses to move at all, and forcing it only damages the gear further.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in West Hollywood, FL
Real numbers, because vague pricing wastes your time. Hinge and post repair in West Hollywood typically runs $185 – $425. Welding and frame straightening on metal gates lands at $260 – $480. Wood gate rebuilds run $220 – $480. Electric gate repairs, including control boards, motors, and wiring, start around $240 and can reach $900 for a full board replacement on a commercial system. Every quote is given and agreed before work begins, so the invoice matches the number you approved. Call (855) 360-5306 and we’ll walk through what you’re seeing and give you a firm range over the phone.
We Also Serve Cities Near West Hollywood
Our Gate Repair in West Hollywood coverage extends into the surrounding communities. We handle gate systems in Hollywood, Andover, Carver Ranches, and Miramar, with the same same-day response where the call is urgent. Wherever the gate is, it’s a gate job and we’ll come look at it.
Serving West Hollywood, FL — Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in West Hollywood
Most operators have a manual release mechanism, usually a keyed cylinder or a pull handle near the motor. On LiftMaster and BFT models, you’ll often find it on the side of the operator housing. Turn it to disengage the motor, then push the gate open by hand. Before you rely on it, test it once during daylight so you know where it is when the power drops at 2 a.m. If your release won’t disengage or you can’t locate it, call (855) 360-5306 and we’ll talk you through it for your specific model.
Wind flex loosened the hinge plates and likely softened the post footing with stormwater. The gate absorbed wind load for hours, and the hardware finally gave up. We saw this repeatedly in West Hollywood after hurricane season storms, including on Funston Street where a double-driveway gate needed hinge plate re-anchoring and a post footing reset before it would swing again. Call us for a sag correction before the operator burns itself out trying to move a gate that no longer sits square.
For a narrow side-yard gate, a linear ram-style actuator or a compact articulated arm operator usually fits best. The constraint on 33021 lots is clearance: the operator housing can’t intrude into a walkway that’s sometimes only three feet wide. We measure the setback, check the hinge orientation, and match the operator to the gate’s swing radius, not the other way around.
Test it before the storm, not during. Unplug the operator or trip the breaker, then cycle the gate open and closed on battery power. If it moves slowly, stops halfway, or won’t engage at all, the battery or charging circuit needs attention. We replace backup batteries on all nine brands we service, and we can install a fresh one before the next named storm reaches the coast. Call (855) 360-5306 for a battery check and replacement quote.
Yes. Safety photocells are required on any automated gate to stop or reverse when a person, child, or pet crosses the path. In West Hollywood’s tight side yards, a reversing gate without working photocells is a real hazard, not a code footnote. We install and align photocells on every electric gate repair we touch, and we test them under full sun and rain because South Florida’s glare and storms both affect sensor performance.
Storm-Ready Gates for West Hollywood’s Tight Lots
West Hollywood’s 33021 is a small, densely built Broward County enclave where single-family homes sit cheek-by-jowl on tight 1950s and 1970s lots. Driveway gates, side-yard gates, and pool-deck gates are squeezed into narrow setbacks and often straddle the property line. Repairing a hinge post or installing a new operator here means coordinating with neighbors and working within a few feet of clearance, something rarely required in newer subdivisions. The constant is hurricane-driven wind loading: every gate is expected to survive the same seasonal storm threats that shape the rest of South Florida construction.
The failure patterns are predictable if you’ve worked this area long enough. Solid infill gates catch wind like sails, pulling hinge plates loose and twisting frames out of square. Posts set in sandy soil lose their grip after two days of heavy rain, especially when the footing was shallow to begin with. After Hurricane Ian’s outer bands lashed West Hollywood, we were called to a ranch on Funston Street where a double-driveway swing gate had sagged and its LiftMaster operator was dead. The wind had flexed the gate, loosening the hinge plates on the shared property-line post. We reset the post footing, performed sag correction, replaced the corroded hinges, and installed a new battery backup, restoring smooth operation.
That’s the pattern every season: gates that “worked fine” before the storm fail because the wind flex found the weak point, and the operator’s battery backup was never tested. If your gate survived the last storm but feels loose or sounds different, don’t wait for it to fail completely. Call (855) 360-5306 and we’ll inspect it before the next system rolls through.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving West Hollywood and the surrounding 33021 area.