Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Fort Pierce, FL | Archway Gate Repair
We repair Ghost Controls gate operators throughout Fort Pierce, from Ghost Controls in Fort Pierce North and oceanfront lots on Hutchinson Island to the gated communities west of I-95. Our Ghost Controls work here is shaped by one reality most pages skip: the salt air on the barrier island corrodes operator housings and battery terminals on a different clock than the inland side, so the same unit can age years apart just a few miles down the road. We’re an independent service company, not affiliated with Ghost Controls, and we diagnose the gate, the post, and the operator before we quote anything. Call (855) 360-5306 for service across 34951, 34954, 34979, and 34981.

Why Fort Pierce Residents Choose Us for Ghost Controls Service
We work on Ghost Controls solar and low-voltage swing and slide operators weekly across the Treasure Coast. That hands-on time means we know the battery, charge-controller, and arm-geometry quirks that trip up generalists. Nelson Arrieta, our owner, grew up near Norwood in Miami Gardens and trained in electrical systems and industrial mechanics at Miami Dade College’s North Campus before spending two decades working through every gate brand South Florida installs. His take is simple: if we’ve seen the brand, we’ve already seen the problem.
Fort Pierce South Ghost Controls service owners call us because we show up already knowing what a Ghost Controls TSS1 heavy-duty swing or TDS2 dual-swing should do on a salt-stressed post. Repair first, replace only when necessary. If the arm and housing are sound, we fix the electronics rather than selling a new operator. When the post is the real problem, we say so.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Fort Pierce
- Control-box and battery-terminal corrosion. Ghost Controls housings on Hutchinson Island and South Beach gates show green-corroded boards and sulfated terminals within a few seasons, often while the arm is still mechanically fine. The salt-laden coastal air does this faster than anything else in Fort Pierce.
- Solar undercharging on shaded or storm-fouled panels. The operator reads “dead” when the 10W panel is just clouded, salt-filmed, or shaded by a fence line and palms, so the battery never recovers. We clean, reposition, or replace the panel and charge controller before condemning the board.
- Hinge and post failure before motor failure. Older mid-century driveway gates in Fort Pierce sit on posts that have leaned or racked over decades of storms. The Ghost Controls arm fights a leaf that no longer clears, trips on obstruction sensing, and never runs right until the post is re-braced.
- Limit and arm-geometry faults after named-storm wind load. An arm that worked all season can jam or reverse when hurricane winds shift a masonry pillar or a hinge bushing seizes from salt corrosion. We re-learn travel limits and replace worn hinge hardware as one repair, not two.
- Battery backup that won’t hold through an outage. Storm-season outages are a Fort Pierce fact. We test the battery under load, clean corroded terminals, and replace the battery with an equal-quality unit when it’s finished.
Ghost Controls Service in Fort Pierce: What Local Conditions Mean for Your Equipment
Fort Pierce sits inside Florida’s wind-borne debris region, which means a Ghost Controls repair on an existing gate here routinely triggers anchoring and rating scrutiny, not just a board swap. The city straddles two corrosion regimes inside one service area: oceanfront pool-cage and driveway gates on Hutchinson Island and South Beach versus Ghost Controls in Indian River Estates and newer gated-community aluminum gates west of I-95. On the salt side of town, operators die on a different clock. We keep marine-grade stainless hinge hardware and corrosion-resistant operators on the truck as standard stock because a hinge that seizes at the bottom pin on Seaway Drive will rot an operator housing within a few seasons. The inland side has its own problem: newer aluminum gates with less rust but more wind-load flex, which shows up as limit faults and arm geometry drift. The same Ghost Controls unit ages years apart a few miles in, and we diagnose accordingly.
On a pool-cage home off Seaway Drive on Hutchinson Island, or for Ghost Controls repair in White City, a TDS2 dual-swing would open one leaf and stall the other, and the battery wouldn’t hold past mid-day. The outboard hinge pin had seized solid from salt and the post had pulled slightly out of plumb. We freed and replaced the marine-grade hinge hardware, re-braced the footing, cleaned the corroded battery terminals, and re-learned travel limits. Both leaves now cycle cleanly and the backup holds through a storm outage.
Ghost Controls Models & Products We Service in Fort Pierce
We service the full Ghost Controls residential line: the Heavy-Duty Single Swing (TSS1) solar opener, the Dual Swing (TDS2) two-leaf driveway operator, and the Tube Slide (TSL) slide-gate operator. We also handle the solar accessory line, including 10W panels, charge controllers, and keypad/remote entry kits.
For parts, we use Ghost Controls-compatible control boards, charge controllers, batteries, and keypad/remote modules, and we substitute OEM or equal-quality parts rather than the cheapest available. We stock what Fort Pierce gates need most: marine-grade hinge hardware, corrosion-resistant battery terminals, and replacement charge controllers. That keeps turnaround fast without waiting on a parts shipment.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Fort Pierce
Ghost Controls gate repair in Fort Pierce typically runs $145 to $310 for common issues like a failed control board, dead battery, or worn hinge hardware. Full operator replacement, including the re-anchoring of a salt-stressed post, usually lands between $950 and $2,400 depending on the model and the condition of the gate itself. The price is quoted and agreed before any work starts, so the invoice matches what we discussed.
What drives cost here more than anywhere else on the Treasure Coast is corrosion. A simple board swap in a dry inland garage gate is one thing. A TSS1 on an oceanfront Hutchinson Island post that needs hinge replacement, terminal cleaning, and limit re-learning is another. Our free estimate covers the diagnosis, the parts list, and the labor so you know the number before you approve anything. Call (855) 360-5306.
Serving Fort Pierce, FL — Our Local Coverage Area
We’re based in the Fort Pierce area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Fort Pierce
We repair both. We’re a gate specialist, not a motor-swap shop, so when a Ghost Controls arm fails because a hinge has seized or a post has leaned, we fix the hinge, re-brace the post, and then re-learn the operator limits. The motor is only part of the system. Call (855) 360-5306 and tell us what the gate is doing; we’ll diagnose the whole assembly.
No. Archway Gate Repair is an independent gate repair company. We are not authorized, sponsored, or endorsed by Ghost Controls. We work on their equipment because it’s widely installed across Fort Pierce, and we’re factory-familiar with the failure points. Arm and housing still sound? We repair the electronics instead of selling a whole new operator.
Most single-operator repairs are done in one visit, often the same day we diagnose it. If we’re re-bracing a post or re-anchoring a footing after storm damage, add time for the concrete work to cure before the operator gets its final limit adjustments. We’ll give you a straight schedule before we start.
We service the Ghost Controls Heavy-Duty Single Swing (TSS1), Dual Swing (TDS2), and Tube Slide (TSL) operators, plus the 10W solar panel, charge controller, and keypad/remote entry kits. If you have a different model, call (855) 360-5306 and tell us what’s on the gate tag; chances are we’ve seen it before.
A battery replacement typically runs $85 to $180 installed, depending on the battery type and whether we’re also cleaning corroded terminals and checking the charge controller. Salt air on the barrier island shortens battery life, so we test under load before replacing anything. Estimates are free; call (855) 360-5306 for an exact quote.
Service Areas Near Fort Pierce
We serve Fort Pierce and the surrounding Treasure Coast communities, including Fort Pierce service area coverage across 34951, 34954, 34979, and 34981. If you’re in Ghost Controls service in Buckingham, Ghost Controls service in Olga, or nearby St. Lucie County neighborhoods, we can typically schedule you the same week. For broader brand questions, see our Ghost Controls sales & service page.
Book Your Ghost Controls Service in Fort Pierce Today
If your Ghost Controls gate is acting up, stuck, or dead after a storm, call (855) 360-5306. We’ll diagnose the operator, the hinges, and the post in one visit and give you a written price before any work begins. Same-day service is often available for emergency repairs in Fort Pierce.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Fort Pierce and the Treasure Coast.