Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in South Palm Beach, FL | Archway Gate Repair
We provide independent Ghost Controls gate repair across South Palm Beach, from the low-rise condos on the ocean side of A1A to the beach cottages tucked along the Intracoastal. The one thing that makes our Ghost Controls work different here is salt: control boards and hinge pins corrode on this barrier island in ways you simply don’t see five miles inland. If your Ghost Controls operator is dead, tripping mid-swing, or holding no charge, call us at (855) 360-5306 and we’ll diagnose it properly.
Why South Palm Beach Residents Choose Us for Ghost Controls Service
We work on the Ghost Controls brand already on your property. Nelson Arrieta grew up near Norwood in Miami Gardens, where half the driveways have slide gates older than he is, and he spent years working through every operator type South Florida throws at a technician before founding Archway Gate Repair. If I’ve seen the brand, I’ve already seen the problem. We’re a gate-only specialist, not a handyman with a gate side hustle, so the Ghost Controls arm, board, and battery harness on your A1A property is exactly what we’re here for. Diagnosed, not guessed. Electric gate repair is our core specialty, not an add-on. For Ghost Controls work in South Palm Beach, that means service calls that start with the right diagnosis and end with an operator that actually runs.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in South Palm Beach
These are the failures we open up every week on Ghost Controls units across South Palm Beach. Each one is tied to the local conditions that make this island different:
- Salt-bridged control boards. On oceanfront and Intracoastal-facing A1A properties, salt spray creeps into the operator enclosure and bridges traces on the Ghost Controls control board. The arm and battery are fine but the unit is dead. We see this constantly in South Palm Beach after a salt-foggy winter stretch.
- Seized hinge pins and dragging hardware. On 30-plus-year-old aluminum and wrought-iron gates, the hinge pins freeze from corrosion. The Ghost Controls operator keeps working but the gate drags, trips the obstruction sensor, and aborts mid-swing. The operator isn’t the problem, the hinge is, and a lot of companies replace the wrong part first.
- Battery and solar charging failure in humid enclosures. Corroded battery terminals and degraded solar panels on Ghost Controls solar-charged setups mean the unit can’t hold charge through a power outage or a near-miss tropical system. In this humidity, those terminals go green faster than inland.
- Baseplate and anchor pull-out on old masonry. Many South Palm Beach gates sit on original 1950s to 1970s masonry walls. Ghost Controls surface-mounted operators installed to an older anchoring standard can pull loose or shear at the baseplate when a storm load hits the gate.
- Post and weld failure on beach-adjacent gates. Wrought-iron posts rust at the base on this island even when the operator itself is healthy. A Ghost Controls operator can’t swing a gate whose post is failing underneath it.
Weld and rust repair, motor repair, and hinge and post repair are all part of what we do on a Ghost Controls call. From the motor to the hinge, we handle the full system.
Ghost Controls Service in South Palm Beach: What Local Conditions Mean for Your Equipment
Most South Palm Beach properties along A1A are built-out 1950s to 1970s low-rise condos and beach cottages with original masonry walls and surface-mounted gate operators. That changes how Ghost Controls equipment gets installed and repaired out here. A Ghost Controls arm or control board that mounts cleanly on a modern inland install often has to be re-anchored to old masonry on this island. The wall is part of the job. We regularly open up a Ghost Controls unit on an oceanfront property and find the operator baseplate pulling away from the original masonry, even when the arm and board look fine. Salt-laden ocean air eats at the anchor points and the wiring terminals at the same time. So a Ghost Controls repair in Palm Springs-style board swap is rarely simple here, it’s a wall-and-baseplate problem as much as an operator problem, and you need a technician who knows both.
Ghost Controls Models & Products We Service in South Palm Beach
We service the full Ghost Controls line you’ll find on South Palm Beach properties: Heavy-Duty Dual Swing tube-gate operator kits, Standard-Duty Single Swing operator kits, the slide gate operator line, and solar-charged or battery-backup swing operator setups. On parts, we’re practical. Ghost Controls OEM control boards, arms, and battery harnesses go where fit and longevity matter, and quality aftermarket hinges, keypads, and remotes go where they meet spec at less cost. We stock common Ghost Controls components locally so a South Palm Beach repair doesn’t wait on a two-week shipment.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in South Palm Beach
Ghost Controls gate repair in South Palm Beach typically runs $180 to $340 for a service call and common board, hinge, or battery repair. If the operator is beyond saving, a new Ghost Controls single swing kit installed starts around $850 to $1,400, and a dual swing replacement runs $1,200 to $2,200 depending on gate size and post condition. Re-anchoring to old masonry, salt-corrosion cleanup on the board, or battery replacement adds to a typical service call, and we always quote the price and get your agreement before any work starts. Repair first, replace only when necessary. Call (855) 360-5306 for a free estimate, and we’ll price your Ghost Controls repair honestly before touching the gate.
Serving South Palm Beach, FL — Our Local Coverage Area
We’re based in the South Palm Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in South Palm Beach
In most cases on A1A, salt spray has bridged traces on the Ghost Controls control board or corroded the battery and solar terminals inside the operator enclosure. The arm and battery test fine, but the board can’t hold a signal. We open the enclosure, clean and reseat the board connections, and replace the board with OEM if corrosion has gone too far — a process similar to our Ghost Controls repair in Lake Clarke Shores. Call (855) 360-5306 if yours is dying repeatedly, it’s usually a board or terminal issue, not the whole unit.
Yes, and this is one of the most common Ghost Controls repairs we do on South Palm Beach’s 1950s to 1970s condo and cottage properties. The operator baseplate often pulls loose from original masonry under hurricane wind-load, and we re-anchor it properly to current high-velocity hurricane zone standards. The operator itself is usually fine.
On this island, it’s usually the gate, not the board. Seized hinge pins or dragging hardware on a 30-plus-year-old aluminum or wrought-iron gate makes the Ghost Controls unit think it hit an obstruction, so it aborts mid-swing. We free or replace the hinge pins, clean the swing path, and only touch the board if the salt corrosion has already set in. Call (855) 360-5306 and we’ll locate the real problem before replacing anything.
Yes. Ghost Controls solar-charged and battery-backup units are common on South Palm Beach properties, and the humid enclosure air here corrodes battery terminals and degrades solar panels faster than inland. We test the charging circuit, replace the battery harness with OEM where it matters, and get the system holding a charge again.
No, we’re an independent Ghost Controls service provider, not manufacturer-affiliated or authorized. That independence means we service what’s actually on your gate, Ghost Controls OEM parts where longevity matters and quality aftermarket where they meet spec at less cost, rather than steering every call toward a full replacement.
Service Areas Near South Palm Beach
Beyond South Palm Beach, we handle Ghost Controls gate repair in nearby communities including Ghost Controls service in Lake Worth Corridor, Ghost Controls service in North Key Largo, Bay Harbor Islands, Bal Harbour, and Sunny Isles Beach. Salt air doesn’t stop at the town line, and neither do we.
Book Your Ghost Controls Service in South Palm Beach Today
If your Ghost Controls gate is down or acting up in South Palm Beach, call (855) 360-5306 now. We’ll get a technician out to diagnose it, quote the fix before any work begins, and get your gate back online as quickly as the weather here allows.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving South Palm Beach and the surrounding area.