Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Three Oaks, FL | Archway Gate Repair
Ghost Controls gate repair in Three Oaks means getting your opener diagnosed and fixed without fighting the neighborhood’s design standards. We’re an independent Ghost Controls service provider (not manufacturer-affiliated or authorized), and we work on these solar and low-voltage swing and slide operators across Three Oaks every week. Call (855) 360-5306 for a free estimate, and we’ll tell you exactly what’s wrong before touching a single bolt.

Why Three Oaks Residents Choose Us for Ghost Controls Service
Most gate companies in Southwest Florida see Ghost Controls as a DIY brand, so they treat every call like a parts swap. We don’t. Nelson Arrieta grew up near Norwood in Miami Gardens, studied electrical systems and industrial mechanics at Miami Dade College’s North Campus, and has spent decades working through every operator type the Gulf coast throws at us. If I’ve seen the brand, I’ve already seen the problem. That’s not a slogan; it’s a diagnostic shortcut that saves our Gate Repair in Three Oaks customers money. We know the TSS1/TDS2 arm geometries, the AXS/AXD board revisions, and exactly how salt air and afternoon sun on a west-facing stucco pillar change how these units behave. You get a repair that fits your equipment and your street, not a generic replacement quote.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Three Oaks
- Remote works, keypad works, gate doesn’t move. In Three Oaks, south- and west-facing stucco pillars bake all afternoon in the Florida sun. The control board and remote receiver inside the enclosure take that heat for years, and eventually the board stops listening to remotes while still responding to the keypad. We replace or reflash the OEM Ghost Controls board and seal the enclosure properly.
- Solar battery quits after a cloudy stretch or a shaded panel. Privacy walls and tall villa landscaping shade solar panels just enough that the charge controller never catches up. The battery drains, the gate stops mid-travel, and the homeowner often gets told the board is dead. It isn’t. We test the battery and charge controller first, and replace only what failed.
- Swing gate stalls halfway even though the motor runs. Salt-laden Gulf air seizes hinge pins and rusts the arm pivot bolts on Ghost Controls swing operators. The motor has enough torque to start, but once the arm geometry binds, it grinds or stalls. We free or replace the hinge hardware with marine-grade stainless and re-learn the limits.
- Gate reverses or won’t close after a storm. Hurricane-season wind racks a decorative aluminum gate leaf slightly out of square. Ghost Controls limit switches read that as an obstruction. The gate reverses halfway closed and throws a fault. We re-plumb and re-anchor the post, realign the leaf, and reset the limits on the board.
- Battery terminals and arm pivot bolts corrode. Three Oaks sits a few miles from the coast, and the salt air is relentless on exposed battery terminals and pivot hardware. A unit that powers up fine then stalls or grinds mid-travel usually has corrosion on the connection points, not a burned motor.
Ghost Controls Service in Three Oaks: What Local Conditions Mean for Your Equipment
Three Oaks is a master-planned, deed-restricted community in ZIP 33967 where nearly every gate is part of a uniform streetscape. Decorative aluminum driveway and privacy gates on Mediterranean-style homes, plus HOA- and community-controlled entry gates, all have to match the neighborhood standard. That means a repaired or replaced Ghost Controls service in Estero style arm, keypad, or finish on a street-visible gate has to look like it belongs there, not just work. We keep manufacturer and finish records on file so the homeowner can document the match if the architectural review board asks. That documentation step is the part of the job an unincorporated area a mile away never requires. In Three Oaks, a gate that works fine but doesn’t match the approved look is still a failed repair.
We were called to a Mediterranean-style home off a deed-restricted street in Three Oaks where a Ghost Controls repair in Fort Myers trained us to fix the Architectural Series swing operator that would open from the remote but reverse halfway closed and throw an obstruction fault. The gate leaf was fine; the west-facing pillar had racked just enough in the wet season to throw the arm geometry off, and the hinge pins were salt-seized. We re-plumbed and re-anchored the post, replaced the hinge hardware with stainless, re-learned the limits on the board, and photographed the matte-black finish and OEM arm so the owner had a record if the architectural review board asked about the hardware change. That’s the difference between a gate repair that lasts and one that gets flagged at the next HOA walkthrough.
Ghost Controls Models & Products We Service in Three Oaks
We service the Ghost Controls heavy-duty single swing gate opener kits (TSS1 / TDS2 family), the slide gate opener kits for driveway and privacy gates, the Architectural Series (AXS / AXD) swing openers, and solar-charged battery operators with keypad and remote accessories. On parts, we fit OEM Ghost Controls boards, arms, batteries, and accessories where they’re available. When the OEM part is the weak link in salt air, we spec marine-grade stainless fasteners and sealed enclosures in their place. Most Three Oaks failures are battery, hinge, or post-geometry problems, not a dead motor, so we lean repair-first and only recommend replacement when the control board and arm are both past service life. For broader Ghost Controls work across the region, see our Ghost Controls sales & service page.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Three Oaks
Ghost Controls gate repair in Three Oaks typically falls into these ranges:
- Diagnostic service call: $75 – $125, credited toward the repair if you proceed.
- Solar battery replacement (OEM Ghost Controls): $120 – $250 installed, depending on model and access.
- Hinge pin and pivot hardware replacement (stainless upgrade): $90 – $180 per hinge set.
- Post re-plumb and re-anchor (single swing gate pillar): $250 – $450, including limit re-learn on the board.
- OEM control board replacement (AXS/AXD or TSS1/TDS2): $180 – $350 installed, depending on board revision.
- Full gate realignment after storm racking: $150 – $300, including limit and force adjustment.
Every job gets a written quote before any work starts, and you approve the number before we turn a wrench. Estimates are free, and we’ll tell you what’s actually wrong before recommending anything. Call (855) 360-5306 for a precise quote on your Ghost Controls system in Three Oaks.
Serving Three Oaks, FL — Our Local Coverage Area
We’re based in the Three Oaks area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Three Oaks
We keep the finish, arm style, and keypad placement matched to what’s already approved for your street. We also photograph and document the work so you have a file if the association asks. Repairs here aren’t just functional; they have to survive a design review. Call (855) 360-5306 and we’ll walk you through what your specific repair will look like before we start.
Usually the board’s remote receiver, not the heat itself. South- and west-facing stucco pillars in Three Oaks bake the enclosure all afternoon, and the receiver board degrades over years of that, something we’ve also seen during Ghost Controls repair in Harlem Heights. We test the remote signal first, then the receiver, and replace only the failed component. In most cases it’s a board swap, not a full operator replacement.
Salt-seized hinge pins or a rusted arm pivot bolt are the usual culprits here. The motor has torque, but the arm geometry binds as the gate travels. We replace the hinge hardware with marine-grade stainless and re-learn the limits on the board. It’s a hinge problem, not a motor problem, most of the time. Call (855) 360-5306 and we’ll confirm it on-site.
Every two to four years, depending on sun exposure and panel shading. Privacy walls and landscaping that shade the panel shorten battery life. We test the charge controller and panel output before swapping batteries, because a bad controller will kill a new battery in months. Most batteries we replace in Three Oaks are two to three years old.
Yes. Most Ghost Controls units in Three Oaks are DIY-installed or builder-installed, and we service both. The brand is designed for homeowner installation, which means arm geometry and limit settings are often set wrong from day one. We correct that during the repair. For Ghost Controls work in nearby communities, see our Ghost Controls service in San Carlos Park and Ghost Controls service in Gateway pages.
Service Areas Near Three Oaks
We cover Three Oaks and the surrounding communities, including Three Oaks service area details. You’ll also find us working on Ghost Controls systems in Hialeah Gardens, Cooper City, Bay Harbor Islands, and Bal Harbour. If you’re on the edge of Three Oaks or just outside, call and we’ll confirm coverage.
Book Your Ghost Controls Service in Three Oaks Today
Your Ghost Controls gate is down, and you don’t want a repair that gets flagged by the HOA. Call (855) 360-5306 for a free estimate. We’ll diagnose it, quote it, and fix it, with documentation for the association if needed.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Three Oaks and the surrounding communities.