Ghost Controls Gate Repair in West Hollywood, FL

Wood & steel frameWood & steel frame
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Ghost Controls Gate Repair in West Hollywood, FL | Archway Gate Repair

We repair Ghost Controls gate operators across West Hollywood, FL (33021), and we also offer Hollywood Ghost Controls service as an independent shop, not a factory-authorized dealer. That matters because we’re not here to sell you a replacement operator you don’t need. What makes Ghost Controls work in West Hollywood different from anywhere else is the tight-lot geometry: side-yard and pool-deck gates squeezed into narrow setbacks, where a swing arm has to clear a fence or a property line without over-traveling. Nelson Arrieta and our team at Archway Gate Repair bring brand-specific Ghost Controls diagnostic work to every call. Reach us at (855) 360-5306 for service in West Hollywood.

Professional technician performing on-site wrought iron gate welding and repair service in West Hollywood, FL

Call (855) 360-5306

Why West Hollywood Residents Choose Us for Ghost Controls Service

Most gate companies in Broward County know Ghost Controls as one brand on a long list. We work on Ghost Controls solar and AC swing and slide operators every week, so we know their control boards, battery harnesses, and accessory wiring inside out. When a Ghost Controls gate acts up in West Hollywood, we’re not learning the brand on your dime. We’re an independent service provider for Ghost Controls sales & service, which means we diagnose and repair the operator you own rather than pushing a factory replacement. We also never claim Ghost Controls authorization or warranty backing – we’re straightforward about that.

Nelson Arrieta picked up the electrical and mechanical side of this trade at Miami Dade College’s North Campus and has spent over two decades working through every gate brand and operator type South Florida throws at him. He’s the kind of tech who references a specific failure mode by name, not vague “control issues.” If we’ve seen the brand, we’ve already seen the problem.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Common Ghost Controls Gate Repair Problems We Solve in West Hollywood

  • Battery backup dying quietly. The sealed AGM battery in Ghost Controls solar and backup kits sits through months of South Florida heat and stops holding charge. The gate works fine on AC until the first storm-season outage, then it won’t open at all. In West Hollywood, where hurricane-season power outages are a given, that’s a gate that fails exactly when you need it.
  • Control board and accessory-terminal corrosion. Salt-laden humidity works into the board and terminal connections, and the gate starts ignoring the keypad or remote while still running from the manual button. We see this a lot on 33021 properties close to the coast-influence air flow, and it’s nearly always a cleaning and re-termination job rather than a board replacement.
  • Limit and arm-mount drift after wind flex. A named storm loosens the hinge plate or post on a narrow-setback driveway swing gate, the arm over-travels, and the operator faults or reverses mid-cycle. This is a West Hollywood signature problem because the gates sit so close to walls and property lines that there’s no room for the arm to wander.
  • Solar panel and charge-controller underperformance. Shaded side-yard gates leave the battery chronically low and the operator sluggish or beeping. On tight 1950s and 1970s lots in West Hollywood, the panel often sits in partial shade from a fence, a hedge, or the house itself most of the day.
  • Swing-arm clearance and hinge-plate wear. When a Ghost Controls swing arm is fitted to a gate with only a few feet of room, the hinge plates take extra stress every cycle. We rebuild posts and hinge plates so the arm travels clean instead of binding or over-traveling.

Ghost Controls Service in West Hollywood: What Local Conditions Mean for Your Equipment

West Hollywood’s 33021 is a small, densely built Broward County enclave where single-family homes sit cheek-by-jowl on tight 1950s and 1970s lots. Driveway, side-yard, and pool-deck gates are squeezed into narrow setbacks and often span the property line. For a Ghost Controls owner, that changes the repair calculus. A swing-arm install or hinge rebuild here is a fit-and-clearance problem as much as an electrical one: the arm has to clear a fence, a wall, or a neighbor’s line without over-traveling, and it has to keep doing that after a storm flexes the post. We service Ghost Controls operators all over West Hollywood service area with that geometry in mind. The other constant is hurricane-driven wind loading. Every gate in West Hollywood is expected to survive the same seasonal storm threats as the rest of South Florida, and a Ghost Controls unit with an untested battery backup or a loosened hinge plate will fail right at the worst moment.

Ghost Controls Models & Products We Service in West Hollywood

We handle Ghost Controls repair in Carver Ranches and West Hollywood for Heavy-Duty Single Swing operators (TDS series), Dual Swing units (TD2 and TDS2 series), the Slide Gate TSL series, and solar-charged swing kits with AXDP and ABBT battery setups and tube-gate mounts. On parts, we fit genuine Ghost Controls batteries, control boards, and arm kits when the OEM part is the reliable fix. We use quality aftermarket hinges, keypads, and intercom modules where they meet or beat OEM without the markup. If a board or arm is truly gone, we tell you. We don’t talk a homeowner into a whole new operator when a battery, limit reset, or hinge-plate rebuild brings the existing Ghost Controls unit back to life in West Hollywood.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ghost Controls Service Pricing in West Hollywood

Ghost Controls gate repair in West Hollywood typically runs between $185 and $430, depending on the failure. A straightforward limit reset or battery swap lands on the lower end; a control board replacement or a full hinge-plate and post rebuild with an arm kit runs higher. Batteries run $60 to $140, and control boards typically span $160 to $360 for the part alone. We carry common Ghost Controls batteries and terminal repair components on the truck so many West Hollywood calls finish in one visit. Every estimate is free, and the price is quoted and agreed before any work starts – no surprises on the invoice. Call (855) 360-5306 for an exact quote on your Ghost Controls gate in West Hollywood.

Serving West Hollywood, FL — Our Local Coverage Area

We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Ghost Controls Gate Repair in West Hollywood

Service Areas Near West Hollywood

Archway Gate Repair provides Ghost Controls service throughout the neighboring communities around West Hollywood, including Hialeah Gardens, Hollywood, Sunny Isles Beach, Bay Harbor Islands, Cooper City, and Bal Harbour. Our Ghost Controls service in Aventura and Ghost Controls service in El Portal cover the same brand-specific repair work for nearby gates, so a West Hollywood call often means a tech is already close.

One home off a compact mid-century side street in 33021 called after a summer storm: their Ghost Controls dual-swing driveway gate would lurch and reverse halfway through the cycle. We found the wind flex had walked the hinge plates and post on the tight-setback gate and left the operator’s backup battery flat. We rebuilt the hinge and post, reset the arm limits, and swapped in a fresh Ghost Controls battery. The gate has cycled cleanly through every outage since.

Book Your Ghost Controls Service in West Hollywood Today

If your Ghost Controls gate is acting up in West Hollywood or you need Ghost Controls in Andover, call Archway Gate Repair at (855) 360-5306 for a free estimate. We diagnose the operator you own and quote the repair before any work starts. Same-day service is available for many Ghost Controls calls in the 33021 area.

Written by Nelson Arrieta, Owner at Archway Gate Repair, serving West Hollywood and Broward County with Ghost Controls gate repair for over two decades.

Need Gate Repair help in West Hollywood? Licensed & insured · same-day response · free estimates
Call (855) 360-5306
Areas We Serve

Request a Free Estimate in West Hollywood

Tell us what you need — Archway Gate Repair responds fast. No obligation.

By providing your information above, you agree to our Privacy Policy and authorize us to contact you by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch