Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in West Palm Beach, FL | Archway Gate Repair
We provide independent Ghost Controls gate repair across West Palm Beach, and most calls share the same throughline: a gate that worked fine for years starts fighting itself after a stretch of salt air, afternoon storms, or a shifted post. The fix usually isn’t a new opener. It’s the corroded connector, the seized hinge plate, or the solar panel that’s been shaded since the neighbor’s oak filled in. Call (855) 360-5306 and we’ll diagnose it correctly.
We’re Ghost Controls sales & service specialists, not generalists. Nelson Arrieta and the team at Archway Gate Repair know this brand’s controller faults and arm-geometry quirks down to the model line, and we know how West Palm Beach’s climate accelerates every one of them.
Why West Palm Beach Residents Choose Us for Ghost Controls Service
Nelson Arrieta grew up around gates. He studied electrical systems and industrial mechanics at Miami Dade College’s North Campus, then spent two decades working through every opener brand South Florida installs, from rusted swing arms on older HOA properties to linear actuators on commercial lots. “If I’ve seen the brand, I’ve already seen the problem,” he says, and with Ghost Controls that’s usually true before the van door closes.
We work on the brand already on your property. No pitch to swap it for something we’d rather sell. We carry genuine Ghost Controls control boards, arms, harness connectors, and limit switches, and we know which parts the salt air here kills first. Whether you’re in Flamingo Park with a 1920s bungalow gate, need Ghost Controls repair in West Gate, or live out west in a gated HOA community, the response is the same: diagnosed, not guessed.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in West Palm Beach
- Salt-corroded control boards and battery terminals. Onshore breezes off the Intracoastal push salt-laden air across Flagler Drive and the near-north side. We routinely open Ghost Controls boxes on gates only three or four years old and find green corrosion on every terminal. The board often isn’t fried, but the connections are. We clean, replace terminals, and seal the enclosure properly.
- Solar charging failures from shaded panels. Palm and oak canopies are part of West Palm Beach’s look, but a Ghost Controls solar panel that used to get full sun can slowly lose it as the trees grow. The gate dies by evening, and it’s not the operator, it’s the charge controller fighting a losing battle. We relocate panels, reconfigure charge settings, or add a second panel where the roofline allows.
- Limit and arm-geometry faults from shifted posts. Sandy fill under West Palm Beach properties shifts with summer downpours, which is why posts creep out of plumb. A Ghost Controls arm that’s suddenly reversing mid-travel or grinding at the stop is usually fighting a leaf that no longer lines up. We re-plumb posts, re-set limits, and re-learn travel before blaming the motor.
- Corroded photo-eye lenses and water-intruded keypads. Subtropical humidity and afternoon storms do a number on the smaller Ghost Controls components. Phantom reversing is often just a salt-fogged lens. Keypad lockout is usually water in the seal. We replace and reseal these before chasing the control board.
- Battery backup systems that won’t hold a charge. After a hurricane season or two of power flickers, Ghost Controls battery backups in West Palm Beach start degrading. We test the batteries, replace cells where needed, and make sure the charger is actually topping them off, not cooking them.
Ghost Controls Service in West Palm Beach: What Local Conditions Mean for Your Equipment
West Palm Beach’s near-north side and barrier-adjacent blocks sit inside Florida’s wind-borne debris region, and that changes the repair conversation. Ghost Controls hardware repaired or replaced here often has to satisfy Miami-Dade County product-approval requirements. So a motor or arm swap on a Flagler Drive gate, or if you need Ghost Controls service in Haverhill, isn’t just a parts match. It’s a code-driven decision. We install sealed, stainless, or marine-grade hardware where the wind-load rules demand more than the stock kit. That’s the difference between a repair that holds and one that gets flagged at the next inspection.
On a Flagler Drive waterfront property, a customer’s Ghost Controls dual-swing operator had gone dead after the rainy season. Our first look showed the arm binding because the salt-sprayed hinge plates had seized and both posts had crept slightly out of plumb. We freed and re-plumbed the hinges, replaced the corroded harness connectors and battery terminals, added a sealed control-box enclosure and stainless fasteners, then re-learned the limits. The gate came back to reliable daily operation without a new opener. That’s repair first, replace only when necessary.
Ghost Controls Models & Products We Service in West Palm Beach
We service the full Ghost Controls lineup you’re likely to have on a West Palm Beach property: the Heavy-Duty Dual Swing Gate Opener kits, single swing-arm automatic openers from the TDS series, solar-ready DC swing and slide operator packages, plus the keypads, remotes, and intercom accessories that come with them. We use genuine Ghost Controls boards and harness connectors where the OEM part is right for the gate, and we upgrade to sealed or stainless hardware where salt and wind-load demands exceed what the stock kit was built for. Common parts are stocked locally, which means a faster turnaround for West Palm Beach and Lake Belvedere Estates Ghost Controls service calls.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in West Palm Beach
Ghost Controls repair in West Palm Beach typically runs $185 to $390 for most service calls, depending on what actually failed. A corroded harness connector or a re-learned limit setting sits at the low end. A control board replacement or battery backup rebuild sits higher. A full motor or arm replacement on a dual-swing system can reach $600 to $900 when the salt air has done serious damage.
What drives the cost here is corrosion and wind-load code compliance, which means we sometimes replace stock fasteners and seals with marine-grade hardware the original kit never had. Every job gets a written price before we start. You’ll know the number, and we don’t change it mid-repair. Call (855) 360-5306 for a free estimate on your Ghost Controls system.
Serving West Palm Beach, FL — Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well, including Plantation Mobile Home Park Ghost Controls service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in West Palm Beach
Water intrusion into the control box or keypad is the usual culprit, and West Palm Beach’s afternoon storms force it fast. We find corroded terminals, wet circuit boards, or a keypad seal that’s given up. The fix is sealing the enclosure, replacing damaged connectors, and often relocating wiring. Call (855) 360-5306 and we’ll come out and trace it.
Usually not. In West Palm Beach, this is most often a shifted post or a salt-seized hinge fighting the arm so the limits don’t line up anymore. We re-plumb, free the hinge, and re-learn the travel. If the operator itself is failing, we’ll tell you that too, but we don’t replace a board when the post is the problem.
Yes, if the property is in the wind-borne debris region, which covers much of West Palm Beach’s near-north side and barrier-adjacent blocks. Repairs and replacements often have to satisfy Miami-Dade County product-approval requirements, which is why we use sealed, stainless, or marine-grade hardware on Flagler Drive and Estate Section gates rather than reusing stock parts that won’t pass.
Shading is the first suspect. Palm and oak canopy in West Palm Beach grows gradually, and a solar panel that used to get six hours of sun might now get two. The battery can’t recover. We test the panel output, check the charge controller, and either relocate the panel or add capacity so the gate doesn’t die at sunset.
We fix the hinges and posts. Most West Palm Beach rust damage on Ghost Controls gates is surface-plus-seizure on the hardware, not structural failure of the gate leaf. We free and recondition hinges, re-plumb shifted posts, and switch to sealed or stainless fasteners. A whole new gate is the last option, not the first. Call (855) 360-5306 for an honest assessment.
Service Areas Near West Palm Beach
Our Ghost Controls service covers all four West Palm Beach ZIP codes and the surrounding cities, including Hialeah Gardens, Hollywood, Sunny Isles Beach, Bay Harbor Islands, Cooper City, and Bal Harbour. If your automatic gate sits near the coast in West Palm Beach service area or in one of the neighboring communities like Belle Glade Camp, we’ll come out. We also serve Ghost Controls service in Belle Glade Camp and Ghost Controls service in Mangonia Park, so if you’re just north or west of the city, we’ve likely got you covered.
Book Your Ghost Controls Service in West Palm Beach Today
If your Ghost Controls gate is dead, binding, or reversing on its own in West Palm Beach, call (855) 360-5306. We’ll get out fast, diagnose it properly, and give you a written price before any work starts. Free estimates, no parts sales pitch.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving West Palm Beach and the surrounding area for over two decades.