Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Westchester, FL | Archway Gate Repair
We provide independent Ghost Controls gate repair across Westchester (33144), and the single biggest factor shaping that work here is the wall your operator is bolted to. Most Ghost Controls arms in this ZIP lag directly into 1950s and 60s concrete-block pilasters, not freestanding steel posts, so a binding or misaligned gate is usually an anchor problem worsened by Miami-Dade’s high-velocity hurricane zone rules. We know those block walls and those operators. Call (855) 360-5306 for service from a gate-only shop that works on Ghost Controls sales & service every week.

Why Westchester Residents Choose Us for Ghost Controls Service
We work on the brand already on your property. Our techs have installed, serviced, and repaired Ghost Controls solar and plug-in operators across Miami-Dade for years, including plenty on Westchester’s aging block-and-stucco walls. We know their control boards, battery backup behavior, and arm geometries from hands-on troubleshooting, not from a dealer manual. Nelson Arrieta, our owner, grew up near Norwood in Miami Gardens and took electrical systems and industrial mechanics coursework at Miami Dade College’s North Campus before spending two decades working through every gate brand and operator type South Florida produces. His phrase on a tough Ghost Controls call: “If I’ve seen the brand, I’ve already seen the problem.” That familiarity is why homeowners and property managers across Westchester Gate Repair call us instead of a general handyman.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Westchester
- Control-board corrosion from salt-laden humidity. Ghost Controls boards mounted low on block walls in Westchester often show green fuzz on terminals and erratic limit learning after a few wet seasons. We clean, test, and replace boards when the corrosion has eaten the traces. It’s a diagnosis, not a guess.
- Battery backup failure after hurricane-season outages. The sealed backup batteries in Ghost Controls operators frequently won’t hold charge when they’ve been cycled hard during storm prep, leaving the gate dead on the next outage. We test the battery under load and replace it with a quality aftermarket unit if the OEM piece is overpriced.
- Arm and bracket fatigue from wall-mounted geometry. Many Westchester installations use Ghost Controls arms bolted to old concrete-block pilasters. UV-degraded brackets and loose anchors cause binding and false obstruction trips, not a bad motor. We see this constantly, and we fix the anchor, not just the symptom.
- Keypad and remote pairing loss after humidity-driven membrane damage. Outdoor Ghost Controls keypads and receivers in 33144 often stop accepting codes when moisture intrudes behind the faceplate. We replace the membrane or receiver and re-pair the system.
- Slide motor strain from sagging rolling gates. Heavy wrought-iron or aluminum slide gates on Westchester perimeter walls put extra load on Ghost Controls slide motors when the rollers wear. We address the motor and the track as one system, because fixing only the motor means a callback in six months.
Ghost Controls Service in Westchester: What Local Conditions Mean for Your Equipment
Westchester’s 33144 ZIP is packed with 1950s to 70s concrete-block perimeter walls, and a large share of Ghost Controls arms here are lagged directly into those block pilasters rather than freestanding steel posts. That means a binding gate is usually a wall-anchor problem, not just a motor issue. And because Westchester sits inside Miami-Dade’s high-velocity hurricane zone, any repair that touches the operator, the arm, or the anchorage puts the gate in scope for NOA and Product Control wind-load rules. That’s a very different job than gate repair in a non-HVHZ Florida city. We re-anchor with hurricane-rated hardware and make sure the operator mount will stay put through the next named storm. We were called to a home off SW 24th Street near Westchester Park for Flagami Ghost Controls service where a Ghost Controls AXS2 solar slide operator would open but not close reliably. The arm bracket had pulled loose from a weathered block pilaster, and UV had cracked the mounting plate. We re-anchored to the pilaster with hurricane-rated hardware, replaced the bracket, and reset the limits, and the gate has run clean through two storm seasons since.
Ghost Controls Models & Products We Service in Westchester
We service the full Ghost Controls line: the AXS Series (AXS1, AXS2), TDS Series (TDS1, TDS2), Heavy-Duty Series (HD1, HD2), and Solar Series (SS1, SS2). We use OEM Ghost Controls control boards, arms, and receivers when the unit is recent enough that OEM parts make economic sense, and quality aftermarket batteries, brackets, and hardware where the OEM piece is overpriced or discontinued. On older solar operators with corroded boards and tired batteries, we tell owners honestly when replacement with a current Ghost Controls unit is cheaper than chasing repairs. We stock common Ghost Controls parts for faster turnaround in Ghost Controls in West Miami.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Westchester
Ghost Controls gate repair in Westchester typically runs between $180 and $340 for common fixes like limit resets, bracket replacement, remote re-pairing, and battery swaps. Control board replacements land higher, from $380 to $700 depending on the model and whether corrosion has spread. Full operator replacements, including the arm, motor, and new brackets, run $900 to $2,000 installed. The price is quoted and agreed before any work starts, and our free estimate covers the diagnosis. Call (855) 360-5306 for an exact quote on your Ghost Controls unit in Westchester.
Serving Westchester, FL — Our Local Coverage Area
We’re based in the Westchester area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Ghost Controls Gate Repair in Westchester
Water is getting into the control board enclosure, usually through a degraded seal or a mounting point that lets moisture wick up from the block wall. In Westchester’s subtropical wet season, even small gaps let salt-laden humidity reach the board, which causes erratic limit memory. We dry and seal the enclosure, and replace the board if the corrosion has already done the damage. Call (855) 360-5306 to have it checked before the next storm cycle.
Yes. We re-anchor the bracket to the pilaster with hurricane-rated hardware and, where the block has spalled or cracked, we use an epoxy-set anchor system that spreads load without tearing the wall open. The repair is clean, and it brings the mount back into compliance with Miami-Dade’s wind-load requirements.
Usually not. The sealed backup battery is a wear item, and Westchester’s hard storm-prep cycling kills them faster than the rest of the operator. We test the board and motor first; if those are healthy, a battery swap is all you need.
It depends on how many direct sun hours the panel gets. Many Westchester lots have mature trees or walls that shade the panel enough to undercharge the battery, especially in winter. We check panel position, battery health, and daily cycle count before recommending solar or a plug-in conversion. Call (855) 360-5306 for a quick site assessment.
If the repair touches the operator anchoring or the gate structure itself, yes, the work falls under Miami-Dade’s high-velocity hurricane zone rules, including NOA and Product Control compliance for the anchoring method and components. We handle this as standard practice on every Ghost Controls service in Virginia Gardens and Westchester, so the gate isn’t just working, it’s wind-load compliant.
Service Areas Near Westchester
We serve Westchester and surrounding Miami-Dade communities including Hialeah Gardens, Bal Harbour, Bay Harbor Islands, and as far north as Sunny Isles Beach and Hollywood. We also cover Cooper City for customers who need Ghost Controls service in Fort Lauderdale and Ghost Controls service in Coral Terrace for neighbors just east of us. If your gate is in any of these areas, call and we’ll get it scheduled.
Book Your Ghost Controls Service in Westchester Today
If your Ghost Controls operator is dead, binding, or losing its limits in Westchester, call (855) 360-5306 for a free estimate. We diagnose the actual problem, quote the price before any work starts, and get your electric gate back online. Same-day service is available for most Ghost Controls repairs in the 33144 area.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Westchester and all of Westchester service area since day one.