Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Tice, FL | Archway Gate Repair
We provide our Mighty Mule services across Tice, FL. What makes our Mighty Mule work different here is that most failures aren’t the motor at all. They’re rusted hinge plates, dried-out posts, and awkward arm geometry on older unincorporated lots. Nelson Arrieta and our crew at Archway Gate Repair service every Mighty Mule opener on the market, and we diagnose the gate, post, and operator together before recommending any repair. Call (855) 360-5306 for a free estimate.
Why Tice Residents Choose Us for Mighty Mule Service
We work on the brand already on your property. Mighty Mule openers show up constantly in Tice because they’re the go-to DIY retrofit for homeowners who fenced their lots years ago and added automation later. That means we see MM260s bolted to chain-link posts, FM500s on welded steel gates, and older E-Z Gate units that have been through a decade of Florida sun. Nelson Arrieta has been doing gate work in South Florida for over two decades, and he picked up his electrical and mechanical training at Miami Dade College’s North Campus before running gate calls across Miami Gardens and the surrounding area. If I’ve seen the brand, I’ve already seen the problem. We bring that familiarity to every Tice job, so diagnosis is faster and you’re not paying for trial-and-error labor.
We’re not a handyman service that occasionally touches a gate. Gate repair is all we do. That focus means our Mighty Mule service in Lochmoor Waterway Estates includes the full ecosystem: automatic gate repair, swing gate repair, hinge and post repair, and electric gate repair from the motor to the hinge. We stock genuine Mighty Mule control boards and arms alongside quality aftermarket hinges, keypads, and photoelectric eyes, so most Tice jobs don’t stall waiting on a part.
Styles & brands we work with
Common Mighty Mule Gate Repair Problems We Solve in Tice
- Operator arms and pivot pins seizing up from Caloosahatchee-side salt air. Rust gets into the pivot pin and the arm binds, so the gearbox strains and the limit travel drifts. The opener keeps running the gate too far or not far enough, and the motor sounds tired even though it’s usually fine once we free the arm and replace the pins.
- Control boards and receivers dying after lightning and summer squalls. Southwest Florida storms send voltage spikes through gate wiring all the time. We replace burned Mighty Mule control boards with genuine parts on gates that are often only a few years old and otherwise mechanically sound.
- Battery-backed Mighty Mule units losing charge in subtropical heat and humidity. The battery dies, the gate stalls mid-travel, or it won’t open after the first power dip of storm season. We test the battery under load, replace it when needed, and check the charging circuit so you’re not buying a battery every nine months.
- Arm geometry problems from non-standard gates and sagging posts. Because so many Tice gates were installed piecemeal over decades, Mighty Mule arms often get mounted at awkward angles. The opener runs against a gate that drags on a sagging post or a rotted wood post, and the arm geometry throws the limits off. We fix the post and hinge first, then re-tune the operator.
- Swing clearance and setback issues on gates near Palm Beach Boulevard. Gates set right at the edge of the commercial arterial have to swing without catching a curb or dropping into the county right-of-way. When we repair or re-hang a Mighty Mule swing gate, we check the travel path and setback so the gate doesn’t become a code problem later.
Mighty Mule Service in Tice: What Local Conditions Mean for Your Equipment
Tice is unincorporated, not inside Fort Myers city limits. For our customers that means gate electrical and structural work goes through Lee County permitting rather than a city building office. Many parcels here were built up piecemeal, and gates often sit close to the Palm Beach Boulevard right-of-way. A Mighty Mule service in North Fort Myers frequently has to hold swing clearance and setback compliance, not just get the gate opening again. We sequence the work the same way every time: fix the post, hinge, and gate leaf so the load on the opener is correct, then address the operator. That order matters on older Tice lots where a wood post has been drying out in subtropical heat or a welded steel gate has been absorbing salt air off the Caloosahatchee. Put a new Mighty Mule on a gate that still drags, and you’ve replaced the wrong thing.
On a mid-century lot off Palm Beach Boulevard, we were called to a Mighty Mule in Buckingham MM560 swing gate that stalled halfway and kept reversing. The operator was fine. The wood hinge post had dried out and leaned in the summer heat, throwing the arm geometry off. We reset the post in concrete, replaced the rusted hinge plates, and re-tuned the limits. The gate has run clean through two storm seasons since. That’s the pattern we see in Tice over and over: the opener is the symptom, not the cause.
Mighty Mule Models & Products We Service in Tice
We service the full Mighty Mule lineup across Tice, including the MM-series swing openers (MM260, MM360, MM560), the FM-series swing gate operators (FM350, FM500, FM600), the TS571 slide gate operator, and the E-Z Gate or EZGO push-to-open single swing openers. For parts, we use genuine Mighty Mule control boards, arms, and hardware where the unit needs them. Where the OEM part is overpriced or discontinued, we carry quality aftermarket hinges, keypads, and photoelectric eyes that fit the application. That parts flexibility means a faster turnaround for Tice jobs because we’re not waiting on a backordered factory part that costs more than the gate is worth.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Tice
Gate repair pricing in Tice depends on what actually failed. A diagnostic visit, a replacement arm pivot pin, or a limit re-tune sits at the lower end. A genuine Mighty Mule control board replacement runs higher because the part itself is expensive. Post resets, hinge plate replacements, and swing clearance corrections fall in between depending on the condition of the gate and how much concrete work is involved. Every estimate is free, and the price is quoted and agreed before any work starts. You won’t get an invoice bigger than the quote. Call (855) 360-5306 for an exact price on your Mighty Mule opener in Tice.
Serving Tice, FL — Our Local Coverage Area
We’re based in the Tice area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Tice
The most common cause on Tice properties is a post that has shifted or an arm pivot that has rusted, which throws the opener’s travel geometry off and triggers the safety reverse. We check the post, hinges, and arm before touching the board, then re-tune the limits. Call (855) 360-5306 if the gate is stalling mid-travel, because every cycle like that adds wear to the gearbox.
Because Tice is unincorporated, gate electrical and structural work falls under Lee County permitting rather than a city building office. Most repair work like a board swap, hinge replacement, or limit re-tune doesn’t require a permit, but electrical runs and post resets sometimes do. We identify that before work starts so you’re not left holding a code violation.
Subtropical heat and humidity shorten battery life, especially when the opener sits inside a dark control box that traps heat all day. We test the battery under load and check the charging circuit. Often the charging board has failed and is cooking the battery. It’s usually a straightforward fix.
Yes, and this is one of the most common calls we get in Tice. Many gates here are non-standard in width and hinge placement, so the Mighty Mule arm was never mounted at the right geometry. We repair the gate and post first, then correct the arm mounting so the opener isn’t fighting the gate every cycle.
It depends on the remaining swing clearance between your gate leaf and the county right-of-way. Some Tice properties have enough, and some don’t. We measure the travel path and setback before recommending a swing operator repair or a different approach. Call (855) 360-5306 and we’ll tell you straight.
Service Areas Near Tice
We handle Mighty Mule gate repairs throughout the Fort Myers area, including nearby Pine Manor and Cypress Lake. Our Mighty Mule service in Pine Manor covers the neighborhoods east of US-41, and our Mighty Mule service in Cypress Lake reaches the communities south of Cypress Lake Drive. We also serve the broader Tice service area and surrounding unincorporated Lee County parcels.
Book Your Mighty Mule Service in Tice Today
If your Mighty Mule gate is stalling, reversing, or dead after a storm, call us. We’ll get an electric gate back online and quote the repair before any work starts. Reach Archway Gate Repair at (855) 360-5306 for a free estimate in Tice.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Tice and the surrounding South Florida area.