Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in West Hollywood, FL | Archway Gate Repair
We provide independent Mighty Mule gate repair across West Hollywood (33021), and the one thing that sets our Mighty Mule work apart here is the combination of brand-specific diagnosis and an intimate understanding of the compact, hurricane-exposed lots that define this city. If your Mighty Mule opener has stopped responding, is beeping, or the gate sags after the last storm, call (855) 360-5306 for a free estimate.

We’re Archway Gate Repair, and we work on the brand already on your property. Nelson Arrieta leads our team, and we’ve been diagnosing Mighty Mule control boards, arms, and battery backups across Broward County long enough to say: if we’ve seen the brand, we’ve already seen the problem. For residents seeking Mighty Mule in Hollywood, that means a repair call that starts with the technician already knowing what to look for, not a discovery process billed by the hour. We’re not a general handyman service and we’re not a Mighty Mule authorized dealer. We’re a gate-only specialist that knows Mighty Mule equipment inside and out.
Why West Hollywood Residents Choose Us for Mighty Mule Service
There are plenty of repair companies in Broward County that will say they “do gates.” Few of them can look at a Mighty Mule MM371W swing opener and immediately know whether the failure is a control board, a limit switch, or a battery backup that gave up during the last power drop. We can. Our technicians are factory-familiar with Mighty Mule’s model lines, plus LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. That brand-specific knowledge means faster diagnosis on every call, whether in West Hollywood or nearby areas needing Andover Mighty Mule service, where tight lots and salt-laden humidity create very specific failure patterns.
Nelson Arrieta grew up near Norwood in Miami Gardens and studied electrical systems and industrial mechanics at Miami Dade College’s North Campus. He’s been working on gate operators throughout South Florida for more than two decades, from rusted swing arms on older HOA properties to modern linear actuators along NW 183rd Street. Customers in Mighty Mule service in Carver Ranches and West Hollywood get that same technical depth applied to their smaller, storm-tested lots. We keep genuine Mighty Mule control boards, arms, and batteries ready for fast turnaround, and we also stock quality aftermarket hinges and hardware when they outperform the OEM parts in salt air. That’s the repair-first, honest-fix approach we bring to every job.
Styles & brands we work with





Common Mighty Mule Gate Repair Problems We Solve in West Hollywood
- Control board corrosion from salt-laden humidity. In West Hollywood, Mighty Mule control boxes mounted low near the gate collect morning dew and storm spray that carry salt from the Atlantic’s edge. That moisture creeps past gaskets and corrodes the board traces over just a couple of seasons. We see boards that read fine one week and fail entirely the next after a humid evening. We replace with OEM boards and improve the mounting position or gasket seal when we can.
- Battery backup failure after hurricane-season outages. The OEM battery in a Mighty Mule opener often won’t hold a charge after a few South Florida storm seasons. Homeowners in West Hollywood discover this the first time the power drops and the gate doesn’t open. We test battery voltage as part of every service call and replace the battery before it leaves the property stranded.
- Limit switch drift and arm binding on swing openers. Wind flex from summer squalls and named storms loosens hinge plates and posts on narrow West Hollywood side yards. When the post shifts even a few millimeters, the actuator arm binds and the limit switch drifts, so the gate starts short-stroking or slamming. We realign the mount and reset the limits instead of masking the problem with repeated remote reprogramming.
- Remote receiver dropouts and keypad failures. The subtropical rain and heat cycles in 33021 stress control box gaskets until they crack and let moisture reach the receiver board and keypad contacts. The gate works fine manually, but the remote stops responding. We replace the gasket, dry and seal the board, and get the opener back online.
- Hinge and post fatigue on double driveway gates. Older Mighty Mule MM572W dual swing gates on mid-century West Hollywood homes often sag because the original hinge plates were undersized for the wind loading. We fit heavier aftermarket hinges and reinforce the post before the arm takes the brunt of the misalignment.
Mighty Mule Service in West Hollywood: What Local Conditions Mean for Your Equipment
West Hollywood’s 33021 ZIP is packed with mid-century ranches on tight lots where driveway gates often span the property line. What that means for a Mighty Mule owner is simple: the opener replacement almost never fits the original mount without re-engineering. The standard arm travels a fixed distance, and the standard post bracket assumes a few feet of clearance that many West Hollywood side yards simply don’t have. We see this on nearly every local call, and we’ve learned to work around it. The constant through all of it is hurricane-driven wind loading. Every gate in this city is expected to survive the same seasonal storm threats that shape South Florida construction, and Mighty Mule openers carry no exemption from that. Wind flex loosens hinge plates and posts, which throws the arm geometry off and causes the opener to bind. Run that open, charge the battery and board, and you have a gate that worked before the storm and fails the week after. Technicians in 33021 see exactly this wave after every named storm: sagging double-driveway gates and dead battery backups that were never tested until the power dropped.
Mighty Mule Models & Products We Service in West Hollywood
We service all of Mighty Mule’s popular residential and small commercial lines. That includes the MM371W and MM571W single swing openers, the MM372W and MM572W dual swing openers, the heavier FM700 swing opener, and the MMS100 slide gate operator. We stock genuine Mighty Mule control boards, arms, and batteries for exact-fit repairs, and we use quality aftermarket hardware when the OEM part simply won’t hold up to West Hollywood’s salt air and wind. If your opener is over 10 to 12 years old and the board or arm is failing, we won’t string you along with repeated repairs. We’ll run a straight repair-vs-replace comparison with you, priced out in writing, so you can decide with full information. Many West Hollywood customers find a new operator is the smarter spend once the failure cascade starts.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in West Hollywood
Most Mighty Mule repairs in West Hollywood fall into three buckets. A battery backup replacement runs roughly $120 – $250 installed, depending on whether we’re swapping in an OEM Mighty Mule battery or a higher-capacity aftermarket equivalent. Control board replacement typically lands between $220 – $450 installed, with OEM boards on the higher end of that range. A partial rebuild – hinge plates, post reinforcement, arm realignment, and limit reset – runs $180 – $400, depending on how much the wind flex has moved the posts. Full opener replacements, including the MM371W or MM572W, are priced per job based on clearance, post condition, and access. What drives the cost here is not the part, it’s the clearance engineering. We never start work without a written price you’ve approved. Call (855) 360-5306 for a free estimate on your Mighty Mule system in West Hollywood, and we’ll give you the honest number before any tools come out.

Serving West Hollywood, FL — Our Local Coverage Area
We’re based in the West Hollywood area and also serve those looking for Mighty Mule in Miramar, and we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in West Hollywood
The OEM battery in your Mighty Mule opener fails faster in West Hollywood because of South Florida’s heat, humidity, and hurricane-season power cycling. High ambient temperatures degrade battery chemistry, and each storm-season outage cycles the battery hard when it already hasn’t been tested in months. When the power drops and the battery has no capacity left, the gate stays dead. We test battery voltage on every call and replace the unit before it strands the gate. Call (855) 360-5306 for a battery test and replacement quote in West Hollywood.
Yes, if the posts are plumb and the hinges are rated for the wind load. The MM572W dual swing opener is designed for double gates, but the weak point on narrow West Hollywood lots is almost never the opener itself. It’s the hinge plates and posts that wind flex has loosened. We reinforce those first, then set the arm geometry and limits so the opener isn’t fighting a sagging gate. If the mount isn’t right, no opener on the market will last.
The most likely culprit is moisture intrusion in the control box gasket. West Hollywood’s subtropical rain and heat cycles crack the gasket over time, and once moisture reaches the receiver board or keypad contacts, the remote signal drops. In some cases the opener still runs from the hardwired controls, but the remote is dead. We replace the gasket, dry and seal the board, and bring the remote receiver back online. Call (855) 360-5306 and we’ll diagnose it in one visit.
If the arm moves but the gate doesn’t, or the opener runs but stalls halfway, the motor may be fine and the problem is in the hinge alignment, limit switches, or a failing capacitor. If the motor hums without moving at all, or we measure open windings, the motor itself is dead. We don’t guess this. We diagnose the motor, board, and drive train on site and show you the test results before recommending a repair or replacement.
We do. Most Mighty Mule openers in West Hollywood were self-installed or put in by a handyman, and those installations often lack proper wire routing, gasket sealing, or post reinforcement. We service them the same way we service professionally installed systems: diagnose the actual failure, fix it correctly, and correct the underlying installation issue that caused it. We’re an independent Mighty Mule service provider, not manufacturer-affiliated or authorized, so our loyalty is to the gate working right, not to a brand program. Call (855) 360-5306 for a free estimate.
Service Areas Near West Hollywood
Outside West Hollywood, our Mighty Mule work covers Hollywood, Hialeah Gardens, Cooper City, and Bay Harbor Islands. Each area has its own gate challenges, from HOA slide gates to tight suburban swing drives. We also handle Mighty Mule service in Aventura and Mighty Mule service in El Portal, bringing the same brand-specific diagnostic approach to every job. If you’re in the broader West Hollywood service area, call us and we’ll let you know our next available slot.
Book Your Mighty Mule Service in West Hollywood Today
Your Mighty Mule opener is down, and the longer it sits, the more the salt air and heat work against it. Call Archway Gate Repair at (855) 360-5306 for a free estimate, or schedule your Mighty Mule service in West Hollywood. We’ll diagnose the gate, explain what failed and why, and give you a written price before any work begins. Learn more about our Mighty Mule sales & service approach.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving West Hollywood and Broward County for over two decades.