Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Burnt Store Marina, FL
Gate installation in Burnt Store Marina usually means one of two things: a decorative driveway gate on a Mediterranean-style villa or canal-front home, or a community entry point that an HOA needs working again before the next storm. Most of the gates we install here are aluminum or powder-coated steel built for salt exposure, and many are automated from day one. If you’re in the 33993 ZIP and your gate is sagging, seized, or simply gone after a hurricane, call Archway Gate Repair at (855) 360-5306 and we’ll give you a straight answer on whether it should be repaired or replaced.
Why Burnt Store Marina Homes Are Different
Burnt Store Marina is a master-planned marina community in unincorporated Lee County, and the gate work here reflects that in ways you won’t find ten miles inland. The housing stock runs mid-1990s to 2000s Mediterranean-style villas, single-family homes, and condos on canal and golf-course lots, plus the large wet and dry boat-storage marina itself. The gates are mostly decorative driveway gates, pool and lanai enclosure gates, and community or dock access gates. That last category is the one that keeps us busy.
The salt air here does not treat gate hardware gently. Hinges on the canal-facing side of a property pit and seize noticeably faster than the street-side hardware on the same home. We regularly find that the dock or water-side gate fails first, sometimes within three to five years of installation if it wasn’t spec’d for coastal exposure. Add hurricane-season wind loading and the fact that many homes sit on low-lying canal lots, and you have a set of conditions that reward gates built with stainless hardware, sealed operators, and storm-rated anchoring. The HOA and community-control points around the marina add another layer: those gates carry daily traffic from residents, contractors, and boat owners, so they fail on a schedule, not by surprise.
Styles & brands we work with
Our Main Burnt Store Marina Services
Two services carry most of our Burnt Store Marina calls: mechanical gate repair and electric gate repair. Here’s what each one involves in this community.
Gate Repair in Burnt Store Marina
Most mechanical failures in Burnt Store Marina come down to salt corrosion, sagging hinges, or a wheel or track that’s packed with sand and shell grit. We work on the gate already on your property, re-tensioning, re-lubricating, and replacing worn hardware before recommending anything larger. Repair first, replace only when necessary. In this climate, a gate that’s been ignored for two summers will often need hinge replacement and a fresh anchor set rather than a full tear-out. Gate Repair in Burnt Store Marina covers the full scope of what we fix on mechanical gates.
Electric Gate Repair in Burnt Store Marina
Electric gates near the marina fail differently than mechanical ones. The operator, control board, safety loops, and wiring all take a beating from humid salt air, and a corroded terminal or a failing capacitor can make a gate behave erratically long before it stops altogether. We diagnose the system from the motor to the hinge, and we’re factory-familiar with the brands most common in Lee County, including LiftMaster, FAAC, BFT, and DoorKing. Electric Gate Repair in Burnt Store Marina is our core specialty, not a side service.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Burnt Store Marina
Gate installation in Burnt Store Marina comes down to building for salt air, hurricane wind, and daily use. Most of what we install here are powder-coated aluminum driveway gates, automated with an operator sized for the gate’s weight and the home’s exposure. We also install dock access gates and community entry gates, where the hardware and the anchoring are the difference between a system that lasts ten years and one that needs a rebuild after the first named storm. This is not a generic install: every gate we put in near the marina is spec’d with stainless hinges, sealed electronics, and anchors rated for the wind zone. If you need a new gate or a full replacement, see our Gate Installation page for the complete scope.
Automatic Gate Installation
Signs you need it
The gate itself is solid but you’re opening and closing it by hand, or the old operator has failed and parts are no longer available.
What it costs in Burnt Store Marina
Automatic gate installation, including the operator and standard controls, typically runs $2,800 to $8,500 in Burnt Store Marina depending on gate weight and access requirements.
How we do it
We mount the operator, run the power and control wiring, install safety sensors and loops where required, and set the open and close limits to match the gate’s travel.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through, sagging beyond adjustment, or simply missing after a storm.
What it costs in Burnt Store Marina
A new driveway gate, powder-coated and hung on stainless hardware, typically runs $3,200 to $9,500 in Burnt Store Marina depending on width, weight, and automation.
How we do it
We measure the opening, order the gate to spec, set posts or columns in concrete rated for the wind zone, and hang and adjust the gate until it swings true.
Sliding Gate Installation
Signs you need it
You have a wide opening or a driveway that can’t accommodate a swing gate, and you need something that tracks clean even with salt and sand in the air.
What it costs in Burnt Store Marina
Sliding gate installation, including the track, rollers, and operator where needed, typically runs $4,000 to $11,000 in Burnt Store Marina depending on opening width and motor requirements.
How we do it
We set the track and foundation, hang the gate on sealed rollers, install the operator and safety edges, and test the full travel under load.
What Gate Installation Costs in Burnt Store Marina
| Item | Typical range in Burnt Store Marina |
|---|---|
| Automatic gate installation (operator included) | $2,800 – $8,500 |
| Driveway gate installation (gate only) | $3,200 – $9,500 |
| Sliding gate installation (track, rollers, operator) | $4,000 – $11,000 |
How long does gate installation take in Burnt Store Marina?
Most driveway and automatic gate installs are completed in one to two days once the gate is on site. Custom gates ordered for an odd opening size can add one to three weeks for fabrication. We’ll give you a written schedule before any work starts.
Do you handle the power run for an automatic gate?
Yes. We run the power from the panel to the operator, install the control wiring, and connect safety sensors and loops. The electrical work is part of the install, not something you need a second contractor for.
Brands We Service in Burnt Store Marina
We work on the brand already on your property. In Burnt Store Marina, that’s often BFT, Linear, Viking, and Ghost Controls, along with LiftMaster, FAAC, and DoorKing on community entry systems. We keep common boards and safety sensors stocked for faster turnaround. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Burnt Store Marina, FL
| Service | Typical range in Burnt Store Marina |
|---|---|
| Gate repair (mechanical, per visit) | $190 – $520 |
| Hinge replacement on a canal-side gate | $280 – $700 |
| Electric gate diagnostic and board repair | $260 – $780 |
| Operator replacement | $850 – $2,600 |
| Safety sensor and loop replacement | $230 – $650 |
| Automatic gate installation | $2,800 – $8,500 |
| Driveway gate installation | $3,200 – $9,500 |
| Sliding gate installation | $4,000 – $11,000 |
| Full gate system replacement on a canal lot | $5,500 – $14,000 |
In Burnt Store Marina, the price usually moves on two things: how much salt corrosion has already set in, and whether the gate faces open water. Canal-side hardware and operators tend to need more replacement than repair. Whatever the number, we quote the full price and get your agreement before any work starts.
Neighborhoods We Serve in Burnt Store Marina
We cover the entire 33993 ZIP, from the villa and condo clusters near the marina to the single-family canal lots and golf-course homes throughout the community. Most calls inside Burnt Store Marina get same-day or next-day response depending on the season and storm activity.
- Marina village and villa condos
- Canal-front single-family homes
- Golf-course lot homes
- Wet and dry boat-storage access points
- HOA and community entry gates
Service Area – Cities Near Burnt Store Marina
Archway Gate Repair works throughout Lee County and the surrounding coastal communities. If you’re just over the bridge or a few miles inland, we cover Cape Coral, FL, Palmona Park, FL, Bokeelia, FL, and Pine Island Center, FL as well. Same crew, same gate-only focus.
Serving Burnt Store Marina, FL — Our Local Coverage Area
We’re based in the Burnt Store Marina area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Burnt Store Marina
Yes. A gate that won’t close or secure is a real problem in a marina community, and we treat those calls as urgent. Same-day response is available in the 33993 ZIP, and we carry common operators and boards on the truck to cut down on return visits. Call (855) 360-5306 and tell us what the gate is doing.
In most Burnt Store Marina communities, yes. Driveway gates and any gate visible from the street or the golf course are usually subject to architectural review. We’ll give you the specs and a drawing to submit to your HOA or property manager. That step is usually faster than people expect.
We work with owners, property managers, and tenants regularly. We’ll coordinate access, provide written quotes for the owner or board, and complete the work without you needing to be on site. That’s standard practice for us in Burnt Store Marina, especially on dock and community gates.
If your gate is sagging, seized, or the operator is working only when it wants to, call Archway Gate Repair at (855) 360-5306 for a free estimate. We’re the Burnt Store Marina gate company that diagnoses the problem and fixes it right the first time.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burnt Store Marina Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Roger Ziegler"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Tyrone Carter"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Rohan Sharma