Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Greenacres City
An electric gate that won’t open after an afternoon storm is the most common call we get from Greenacres City homeowners. We repair the operator, motor, control board, or safety system already on your property and get it running again, usually the same day we diagnose it. Archway Gate Repair works on the gate brands already installed in Greenacres City homes, from 1980s-era LiftMaster swing operators to newer Mighty Mule openers on side-yard gates. If your gate is dead, sagging, or stopping halfway, call (855) 360-5306 and we’ll send a gate technician who knows Palm Beach County’s inland storm patterns and the equipment they hammer.
We’re in Greenacres City regularly, working across the 33454 ZIP from the small-lot neighborhoods near Jog Road to the 55+ communities off Lake Worth Road and the older streets between Melaleuca Lane and 10th Avenue North. Greenacres City sits inland of the coastal sea-breeze corridor, so the afternoon thunderstorms that build over the Everglades’ eastern edge hit this ZIP with the region’s most intense wind-and-lightning combination. Gate openers and operators here get fried and wind-torqued far more often than in coastal towns whose sea breezes arrive first and knock the storms apart. That’s the reality we repair around every week.
Why Archway Gate Repair Is Greenacres City’s Preferred Electric Gate Repair Company
We’re a gate-only shop. Fencing companies do fences. Garage door companies do garage doors. We do gates: manual gates, electric gates, swing gates, slide gates, and the access control systems that run them. Every truck rolling into Greenacres City is stocked for gate work specifically, which means we don’t show up, look at your operator, and tell you we’ll be back in a week with a part order. Nelson Arrieta built the company around a repair-first philosophy. We diagnose, then repair. Replacement only gets recommended when the math honestly favors it, which happens most often on pre-2000 equipment that can’t be retrofitted to meet current safety standards.
Greenacres City customers call us because we recognize the equipment on their property before we finish asking for the model number. The older neighborhoods here are full of 1970s and 80s homes with gates hung at the same time the house was built. Those gates have specific failure patterns: rusted hinge posts, obsolete chain-and-operator parts, and control boards that predate modern surge protection. If you live in one of the 55+ communities off Lake Worth Road or on a small-lot street near Melaleuca Lane, your gate almost certainly shares those failure points. We know that before we arrive. That’s the practical difference between a specialist and a generalist.
Response time to Greenacres City is measured in hours, not days, for storm-related failures. We prioritize dead gates because a stuck-open gate means an unsecured property and a stuck-closed gate means a blocked driveway. Call (855) 360-5306 and describe what happened; we’ll tell you what we think it is and when we can be there.
Styles & brands we work with
Electric Gate Motor in Greenacres City
An Electric Gate Motor in Greenacres City takes a beating from the moment the first May thunderstorm rolls through until hurricane season winds down in November. The motor is the muscle of your gate system, and here in the 33454 ZIP it’s exposed to almost-daily afternoon storms during the wet season. We replace and service gate motors on swing and slide gates, including operators from LiftMaster, FAAC, Mighty Mule, Elite, and BFT. A typical gate motor replacement in Greenacres City runs $650 to $1,400 depending on operator size, gate weight, and whether the old mounting hardware can be reused. Motor repair, when possible, runs $180 to $450.
Storm-Damaged Operator Diagnosis
Lightning doesn’t always kill a motor outright. Sometimes it weakens the capacitor, burns a relay, or surges the transformer, and the gate works intermittently for weeks afterward. We test the motor, the board, and the wiring path together, because a storm typically damages more than one component. That full-system check is the difference between fixing the problem and replacing parts on a guess.
Retrofit vs. Replacement on Older Gates
On a 1980s aluminum drive gate with an original chain-drive operator, we’ll tell you straight if the motor can be replaced or if the entire operator assembly has to go. Parts for some legacy units simply aren’t manufactured anymore. In those cases, retrofitting a modern operator with safety photocells usually costs less than repeatedly nursing the old unit through each storm season.
Gate Access Control in Greenacres City
Gate Access Control in Greenacres City means the difference between a gate that opens with your existing remote and a gate that opens with a keypad, phone app, or intercom. Many Greenacres City homes built in the 70s and 80s still have single-button remotes and no keypad entry. Upgrading access control on an existing electric gate is usually straightforward. A typical keypad addition runs $250 to $500 installed. Adding or replacing a full access control system, including intercom and app-based entry, runs $900 to $2,200 depending on how many entry points and users you need.
Keypad and Remote Integration on Older Operators
Some pre-2000 operators won’t accept a modern keypad or app module without an interface kit. We handle that integration, and we tell you upfront if your existing operator can support the upgrade or if a receiver add-on is the better route. You shouldn’t have to replace a working gate motor just to get keypad entry.
HOA and Multi-Home Gate Systems
Greenacres City has several small HOA communities with shared entry gates. Those systems get more cycles per day than a single-family gate and carry more weight when they fail. We service multi-home access control setups, including shared keypads, telephone entry, and loop-detector equipped slide gates, and we can set up temporary access while a shared gate is down.
Trusted Brands We Service in Greenacres City
We’re factory-familiar with nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Greenacres City customers, brand familiarity isn’t a marketing line. It means we carry the common failure parts for those systems on the truck: control boards, receivers, limit switches, capacitors, and photocells. When your 1987 LiftMaster swing operator dies after a storm, we usually don’t need a parts run. We diagnose the unit on-site and repair it with what’s already in the van. That keeps a same-day repair from turning into a two-trip job.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Greenacres City Homes
- Lightning-fried control boards. Greenacres City’s inland position means afternoon storms arrive with full electrical intensity. The control board is the first thing to fail on legacy LiftMaster and Linear operators, and usually the first thing we test.
- Worn hinge posts and sagging gates on 1970s-80s aluminum drive gates. Post footings fail before the gate panel does in this housing stock. A gate that drags is rarely a motor problem; it’s a structural problem that the motor was never sized to overcome.
- Obsolete chain-and-operator parts that can’t be retrofitted with modern safety photocells. Pre-2000 installs often can’t meet current UL 325 entrapment standards without a full operator swap.
- Rack and pinion wear on slide gates. Inland humidity plus repeated wind torque wears pinion teeth unevenly. The gate still moves, but it jerks and grinds until the rack strips.
Pricing for Electric Gate Repair in Greenacres City, FL
Here are the numbers we give Greenacres City homeowners before any work starts. Gate motor repair runs $180 to $450. Full motor or operator replacement runs $650 to $1,400 based on gate size and operator type. Control board replacement runs $300 to $700. Safety photocell replacement or retrofitting runs $200 to $450 per gate. Keypad installation runs $250 to $500. Access control system upgrades run $900 to $2,200. Every price gets quoted and agreed before we turn a wrench. No open-ended invoices. Estimate is free. Call (855) 360-5306 and we’ll come out, test the system, and put the number in writing.
One honest note on older gates: repair isn’t always the cheaper long-term play. If you have a rusted post footing and an obsolete operator, we’ll show you the repair cost and the replacement cost side by side. You decide. We don’t push replacements on 55+ community homeowners when repairing is the reasonable call.
We Also Serve Cities Near Greenacres City
Our service area covers communities around Greenacres City and the broader Palm Beach County corridor. We respond to gate repair calls in Lake Worth, Lake Worth Corridor, Royal Palm Estates, and Lake Clarke Shores, often the same day. If your electric gate is down and you’re not sure whether you’re in our coverage area, call (855) 360-5306 and we’ll tell you when we can get a technician to your street. Need more about our broader service footprint? See Electric Gate Repair coverage details.
Serving Greenacres City, FL — Our Local Coverage Area
We’re based in the Greenacres City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Greenacres City
Most storm failures on 1980s-era openers are repairable, especially if the damage is isolated to the control board, capacitor, or a relay. The deciding factor is parts availability for your specific operator model. Some legacy LiftMaster and Linear units no longer have OEM parts manufactured. We’ll test the unit, identify what failed, and tell you the repair cost versus the cost of a retrofit operator with safety photocells. Call (855) 360-5306 to schedule a diagnostic.
In most Greenacres City homes, yes. A sagging gate usually means a failing post footing or worn hinges, not a bad gate panel. We remove the gate, reset or replace the post, rehang the gate, and adjust the operator. The gate panel itself rarely needs replacing unless it’s structurally rusted through. We’ll give you a fixed price for post resetting and hinge replacement before work begins.
Yes. Since UL 325 took effect, any electric gate operator that doesn’t have functioning entrapment protection is a safety liability. Many pre-2000 installs here in Greenacres City were hung without photocells or with photocells that have since failed. We can retrofit safety photocells onto most existing operators. If your operator is too obsolete to accept them, we’ll tell you and give you a retrofit quote for the full operator.
Greenacres City sits inland of the sea-breeze corridor, so afternoon thunderstorms arrive with their full wind-and-lightning punch. Coastal towns get the sea breeze first, which partially breaks up those storm cells. Here, the lightning and wind hit the operator directly. That’s why we see more fried control boards and wind-torqued gate hardware in the 33454 ZIP than in eastern Palm Beach County.
Most of the time, yes. We install keypads, app-based entry systems, intercoms, and phone entry on existing electric gates, even older ones. If your operator needs an interface kit to support the upgrade, we install that too. A typical keypad addition runs $250 to $500. We’ll test your existing operator and confirm compatibility before quoting. Call (855) 360-5306 for a free estimate.
If your gate is down or acting up in Greenacres City, call Archway Gate Repair at (855) 360-5306. We’ll diagnose your system, explain the fix in plain terms, and give you a written price before any work starts. Storm season in Greenacres City doesn’t wait. Neither does a dead gate.
Written by Nelson Arrieta, Owner at Archway Gate Repair, serving Greenacres City and Palm Beach County.